lkml.org 
[lkml]   [2013]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: kirkwood: extend the kirkwood pcm/dma driver for DT usage
On Tue, Jul 23, 2013 at 02:23:14PM +0100, Russell King - ARM Linux wrote:
> On Tue, Jul 23, 2013 at 01:57:56PM +0100, Mark Brown wrote:

> > This device has no registers or other hardware - this looks like a stub
> > device which shouldn't be visible in DT but should instead be created by
> > the I2S driver - look at how most of the other DT platforms using
> > dmaengine work.

> There is no separate DMA engine on this platform. dmaengine is totally
> irrelevant to this hardware.

The pattern for instantiating a DMA controller that's integrated into
the DAI is the same as that where the DMA controller is a shared IP
accessed via dmaengine so it's still useful to look at these platforms
to see how to do the instnatiation.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-07-23 16:01    [W:0.038 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site