lkml.org 
[lkml]   [2013]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
On 07/18/2013 07:37 PM, Peter Hurley wrote:
> On 07/18/2013 06:09 PM, Sarah Sharp wrote:
>> On Thu, Jul 18, 2013 at 04:28:01PM -0400, Peter Hurley wrote:
>>> [ +cc Sarah Sharp, linux-usb ]
>>>
>>> On 07/18/2013 09:21 AM, Nestor Lopez Casado wrote:
>>>> This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887.
>>>>
>>>> This patch re-adds the workaround introduced by 596264082f10dd4
>>>> which was reverted by 8af6c08830b1ae114.
>>>>
>>>> The original patch 596264 was needed to overcome a situation where
>>>> the hid-core would drop incoming reports while probe() was being
>>>> executed.
>>>>
>>>> This issue was solved by c849a6143bec520af which added
>>>> hid_device_io_start() and hid_device_io_stop() that enable a specific
>>>> hid driver to opt-in for input reports while its probe() is being
>>>> executed.
>>>>
>>>> Commit a9dd22b730857347 modified hid-logitech-dj so as to use the
>>>> functionality added to hid-core. Having done that, workaround 596264
>>>> was no longer necessary and was reverted by 8af6c08.
>>>>
>>>> We now encounter a different problem that ends up 'again' thwarting
>>>> the Unifying receiver enumeration. The problem is time and usb
>>>> controller
>>>> dependent. Ocasionally the reports sent to the usb receiver to start
>>>> the paired devices enumeration fail with -EPIPE and the receiver never
>>>> gets to enumerate the paired devices.
>>>>
>>>> With dcd9006b1b053c7b1c the problem was "hidden" as the call to the
>>>> usb
>>>> driver became asynchronous and none was catching the error from the
>>>> failing URB.
>>>>
>>>> As the root cause for this failing SET_REPORT is not understood yet,
>>>> -possibly a race on the usb controller drivers or a problem with the
>>>> Unifying receiver- reintroducing this workaround solves the problem.
>>>
>>>
>>> Before we revert to using the workaround, I'd like to suggest that
>>> this new "hidden" problem may be an interaction with the xhci_hcd host
>>> controller driver only.
>>>
>>> Looking at the related bug, the OP indicates the machine only has
>>> USB3 ports. Additionally, comments #7, #100, and #104 of the original
>>> bug report [1] add additional information that would seem to confirm
>>> this suspicion.
>>
>> Question: does this USB device need a control transfer to reset its
>> endpoints when the endpoints are not actually halted? If so, yes, that
>> is a known xHCI driver bug that needs to be fixed. The xHCI host will
>> not accept a Reset Endpoint command when the endpoints are not actually
>> halted, but the USB core will send the control transfer to reset the
>> endpoint. That means the device and host toggles will be out of sync,
>> and all messages will start to fail with -EPIPE.
>>
>> Can the OP capture a usbmon trace when the device starts failing? That
>> will reveal whether this actually is the issue. dmesg output with
>> CONFIG_USB_DEBUG and CONFIG_USB_XHCI_HCD_DEBUGGING turned on would also
>> be helpful.
>
> Sarah,
>
> I forwarded your usbmon capture request to the OP in the bug report
> (I don't have an email address for the reporter).
>
> As far as getting printk output from a custom kernel, I think that may
> be beyond the reporter's capability. Perhaps one of the Ubuntu devs
> triaging this bug could provide a test kernel for the OP with those
> options on.
>
> Joseph, would you be willing to do that?

Sure thing. I'll build a kernel and request that the bug reporter
collect usbmon data.

Thanks everyone for the feedback!

>
> Regards,
> Peter Hurley



\
 
 \ /
  Last update: 2013-07-19 17:21    [W:0.156 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site