lkml.org 
[lkml]   [2013]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] arm: dts: Add USB phy nodes for AM33XX
Date
Add phy nodes for AM33XX platform and split the musb nodes
per instance.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: George Cherian <george.cherian@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 68 +++++++++++++++++++++++++++++++++----------
1 file changed, 53 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 8e1248f..e3890c4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -326,21 +326,59 @@
status = "disabled";
};

- usb@47400000 {
- compatible = "ti,musb-am33xx";
- reg = <0x47400000 0x1000 /* usbss */
- 0x47401000 0x800 /* musb instance 0 */
- 0x47401800 0x800>; /* musb instance 1 */
- interrupts = <17 /* usbss */
- 18 /* musb instance 0 */
- 19>; /* musb instance 1 */
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- port0-mode = <3>;
- port1-mode = <3>;
- power = <250>;
- ti,hwmods = "usb_otg_hs";
+ phy1: am335x-usb0@44e10620 {
+ compatible = "ti,am335x-usb2";
+ #phy-cells = <0>;
+ id= <0>;
+ };
+
+ phy2: am335x-usb1@44e10628 {
+ compatible = "ti,am335x-usb2";
+ #phy-cells = <0>;
+ id= <1>;
+ };
+
+ omap_control_usb: omap-control-usb@44e10620 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x44e10620 0x10>;
+ reg-names = "control_dev_conf";
+ ti,type = <3>;
+ };
+
+ musb: usb@47400000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <17>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0@47401000 {
+ reg = <0x47401000 0x800>;
+ interrupts = <18>;
+ interrupt-names = "mc";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port-mode = <3>;
+ power = <250>;
+ phys = <&phy1>;
+ phy-names = "am335x-usb0";
+ };
+
+ usb1@47401800 {
+ reg = <0x47401800 0x800>;
+ interrupts = <19>;
+ interrupt-names = "mc";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port-mode = <3>;
+ power = <250>;
+ phys = <&phy2>;
+ phy-names = "am335x-usb1";
+ };
};

mac: ethernet@4a100000 {
--
1.8.1.4


\
 
 \ /
  Last update: 2013-07-19 15:01    [W:0.124 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site