lkml.org 
[lkml]   [2013]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] Enable lm90 in Tegra30 and Tegra114.
On 07/17/2013 02:17 AM, Wei Ni wrote:
> On 07/16/2013 07:14 PM, Wei Ni wrote:
>> On 07/16/2013 01:13 AM, Stephen Warren wrote:
>>> On 07/15/2013 10:48 AM, Stephen Warren wrote:
>>>> On 07/12/2013 01:49 AM, Wei Ni wrote:
>>>>> Enable thermal sensor lm90 for Tegra30 Cardhu and Tegra114 Dalmore.
>>>>
>>>> I have applied the series to Tegra's for-3.12/dt branch.
>>>
>>> Actually, I see the following on Dalmore (although Cardhu works):
>>>
>>> [ 29.448539] lm90 0-004c: Register 0x4 read failed (-121)
>>> [ 29.453930] lm90 0-004c: Failed to read convrate register!
>>> [ 29.460034] lm90 0-004c: Register 0x3 read failed (-121)
>>> [ 29.465408] lm90 0-004c: Initialization failed!
>>>
>>> So, there's something wrong here, and I've dropped the patch for
>>> Dalmore. Does this patch actually work for you?
>>>
>> I test it with the Chrome u-boot, the lm90 works fine.
>> But today, if I tried to use the uboot from
>> git://git.denx.de/u-boot-tegra.git, I can repo your errors, it seems the
>> i2c can't work, the lm90 driver read register failed.
>> I traced it, but can't find the root cause yet.
>
> Hi, Stephen
> I found the root cause.
> In the Chrome u-boot, it will turn on the regulator for the lm90, but in
> the upstream u-boot, it didn't do it.

> I think this regulator should be handled in the kernel driver, but it
> seems the regulator palmas tps65913 didn't be supported on the dalmore yet.
> So may be we have to wait the palmas ready on dalmore.

Yes, I agree. (although Laxman's regulator patch caused the SD card to
stop working, so that needs to be fixed up, but hopefully it's a simple
issue).


\
 
 \ /
  Last update: 2013-07-17 19:41    [W:0.047 / U:1.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site