lkml.org 
[lkml]   [2013]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
From
On Wed, Jun 5, 2013 at 1:56 PM, Doug Anderson <dianders@chromium.org> wrote:
> If the early MMU mapping of the UART happens to get booted out of the
> TLB between the start of paging_init() and when we finally re-add the
> UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
> we've got early_printk enabled. Avoid this hang by calling
> debug_ll_io_init() early.
>
> Without this patch, you can reliably reproduce a hang when early
> printk is enabled by adding flush_tlb_all() at the start of
> exynos_init_io(). After this patch the hang goes away.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>

Acked-by: Olof Johansson <olof@lixom.net>


Kukjin, this seems appropriate for 3.10. Do you have other fixes
queued or should I apply this directly?


-Olof


\
 
 \ /
  Last update: 2013-06-06 00:41    [W:0.056 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site