lkml.org 
[lkml]   [2013]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu
Date
- Enable PCIe controller on Cardhu
- Only port 2 is connected on this board
- Add regulators required for Tegra30

Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
---
Patch is based on remotes/gitorious_thierryreding_linux/tegra/next and should be applied on top of this.

Changes in V3:
- Added num-lanes property for cardhu as per review comments

arch/arm/boot/dts/tegra30-cardhu.dtsi | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 8ad4841..b6270e3 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -27,6 +27,24 @@
model = "NVIDIA Tegra30 Cardhu evaluation board";
compatible = "nvidia,cardhu", "nvidia,tegra30";

+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&pex_hvdd_3v3_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+ };
+ };
+
host1x {
dc@54200000 {
rgb {
--
1.7.0.4


\
 
 \ /
  Last update: 2013-06-04 21:41    [W:0.104 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site