lkml.org 
[lkml]   [2013]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/9] drivers: phy: add generic PHY framework
Hi,

On Tuesday 04 June 2013 03:51 PM, Sylwester Nawrocki wrote:
> On 04/29/2013 12:03 PM, Kishon Vijay Abraham I wrote:
>> The PHY framework provides a set of APIs for the PHY drivers to
>> create/destroy a PHY and APIs for the PHY users to obtain a reference to the
>> PHY with or without using phandle. For dt-boot, the PHY drivers should
>> also register *PHY provider* with the framework.
>>
>> PHY drivers should create the PHY by passing id and ops like init, exit,
>> power_on and power_off. This framework is also pm runtime enabled.
>>
>> The documentation for the generic PHY framework is added in
>> Documentation/phy.txt and the documentation for dt binding can be found at
>> Documentation/devicetree/bindings/phy/phy-bindings.txt
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> .../devicetree/bindings/phy/phy-bindings.txt | 66 +++
>> Documentation/phy.txt | 123 +++++
>> MAINTAINERS | 7 +
>> drivers/Kconfig | 2 +
>> drivers/Makefile | 2 +
>> drivers/phy/Kconfig | 13 +
>> drivers/phy/Makefile | 5 +
>> drivers/phy/phy-core.c | 539 ++++++++++++++++++++
>> include/linux/phy/phy.h | 248 +++++++++
>> 9 files changed, 1005 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/phy-bindings.txt
>> create mode 100644 Documentation/phy.txt
>> create mode 100644 drivers/phy/Kconfig
>> create mode 100644 drivers/phy/Makefile
>> create mode 100644 drivers/phy/phy-core.c
>> create mode 100644 include/linux/phy/phy.h
>
>> +static inline int phy_init(struct phy *phy)
>> +{
>> + pm_runtime_get_sync(&phy->dev);
>
> Hmm, no need to check return value here ? Also it looks a bit unexpected to

I purposely dint check the return values in order to support platforms
that don’t enable pm_runtime.
> possibly have runtime_resume callback of a PHY device called before ops->init()
> call ? It seems a bit unclear what the purpose of init() callback is.

Not really. Anything that is used to initialize the PHY (internal
configuration) can go in phy_init. Usually in runtime_resume callback,
optional functional clocks are enabled and also in some cases context
restore is done. So it really makes sense to enable clocks/module
(pm_runtime_get_sync) before doing a PHY configuration (phy_init).

>
>> + if (phy->ops->init)
>> + return phy->ops->init(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static inline int phy_exit(struct phy *phy)
>> +{
>> + int ret = -EINVAL;
>> +
>> + if (phy->ops->exit)
>> + ret = phy->ops->exit(phy);
>> +
>> + pm_runtime_put_sync(&phy->dev);
>> +
>> + return ret;
>> +}
>
> Do phy_init/phy_exit need to be mandatory ? What if there is really

No. phy_init/phy_exit is not mandatory at all.
> nothing to do in those callbacks ? Perhaps -ENOIOCTLCMD should be
> returned if a callback is not implemented, so PHY users can recognize
> such situation and proceed ?

So currently these APIs return -EINVAL if these callbacks are not
populated which is good enough IMHO.
>
>> +static inline int phy_power_on(struct phy *phy)
>> +{
>> + if (phy->ops->power_on)
>> + return phy->ops->power_on(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static inline int phy_power_off(struct phy *phy)
>> +{
>> + if (phy->ops->power_off)
>> + return phy->ops->power_off(phy);
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static inline int phy_pm_runtime_get(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return -EINVAL;
>> +
>> + return pm_runtime_get(&phy->dev);
>> +}
>> +
>> +static inline int phy_pm_runtime_get_sync(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return -EINVAL;
>> +
>> + return pm_runtime_get_sync(&phy->dev);
>> +}
>> +
>> +static inline int phy_pm_runtime_put(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return -EINVAL;
>> +
>> + return pm_runtime_put(&phy->dev);
>> +}
>> +
>> +static inline int phy_pm_runtime_put_sync(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return -EINVAL;
>> +
>> + return pm_runtime_put_sync(&phy->dev);
>> +}
>> +
>> +static inline void phy_pm_runtime_allow(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return;
>> +
>> + pm_runtime_allow(&phy->dev);
>> +}
>> +
>> +static inline void phy_pm_runtime_forbid(struct phy *phy)
>> +{
>> + if (WARN(IS_ERR(phy), "Invalid PHY reference\n"))
>> + return;
>> +
>> + pm_runtime_forbid(&phy->dev);
>> +}
>
> Do we need to have all these runtime PM wrappers ? I guess you
> intended to avoid referencing phy->dev from the PHY consumers ?

Yeah.. I dint want pm_runtime of phy core device to be called from PHY
consumers.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-06-04 15:21    [W:0.127 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site