lkml.org 
[lkml]   [2013]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] mmc: atmel-mci: prepare clk before calling enable
On 25/06/2013 10:11, Boris BREZILLON :
> Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
> avoid common clk framework warnings.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>

It seems that you forgot the Acked-by line from Ludovic.

One comment...

> ---
> drivers/mmc/host/atmel-mci.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index e75774f..631c4cf 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -380,6 +380,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
> {
> struct atmel_mci *host = s->private;
> u32 *buf;
> + int ret = 0;
> +
>
> buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
> if (!buf)
> @@ -391,9 +393,13 @@ static int atmci_regs_show(struct seq_file *s, void *v)
> * consistent.
> */
> spin_lock_bh(&host->lock);
> - clk_enable(host->mck);
> + ret = clk_prepare_enable(host->mck);

Do you think that it is needed here? I do not think it can be called
before the probe() function and I do not know if the result can change
depending on when clk_prepare_enable() is called...

> + if (ret) {
> + spin_unlock_bh(&host->lock);
> + goto out;
> + }
> memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
> - clk_disable(host->mck);
> + clk_disable_unprepare(host->mck);
> spin_unlock_bh(&host->lock);
>
> seq_printf(s, "MR:\t0x%08x%s%s ",
> @@ -444,9 +450,10 @@ static int atmci_regs_show(struct seq_file *s, void *v)
> val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
> }
>
> +out:
> kfree(buf);
>
> - return 0;
> + return ret;
> }
>
> static int atmci_regs_open(struct inode *inode, struct file *file)
> @@ -1281,7 +1288,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>
> spin_lock_bh(&host->lock);
> if (!host->mode_reg) {
> - clk_enable(host->mck);
> + clk_prepare_enable(host->mck);
> atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
> atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
> if (host->caps.has_cfg_reg)
> @@ -1361,7 +1368,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
> if (host->mode_reg) {
> atmci_readl(host, ATMCI_MR);
> - clk_disable(host->mck);
> + clk_disable_unprepare(host->mck);
> }
> host->mode_reg = 0;
> }
> @@ -2379,10 +2386,12 @@ static int __init atmci_probe(struct platform_device *pdev)
> if (!host->regs)
> goto err_ioremap;
>
> - clk_enable(host->mck);
> + ret = clk_prepare_enable(host->mck);
> + if (ret)
> + goto err_request_irq;
> atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
> host->bus_hz = clk_get_rate(host->mck);
> - clk_disable(host->mck);
> + clk_disable_unprepare(host->mck);
>
> host->mapbase = regs->start;
>
> @@ -2487,11 +2496,11 @@ static int __exit atmci_remove(struct platform_device *pdev)
> atmci_cleanup_slot(host->slot[i], i);
> }
>
> - clk_enable(host->mck);
> + clk_prepare_enable(host->mck);
> atmci_writel(host, ATMCI_IDR, ~0UL);
> atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
> atmci_readl(host, ATMCI_SR);
> - clk_disable(host->mck);
> + clk_disable_unprepare(host->mck);
>
> if (host->dma.chan)
> dma_release_channel(host->dma.chan);
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-06-28 10:21    [W:0.183 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site