lkml.org 
[lkml]   [2013]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: dwc3: core: continue probe even if usb3 phy is not available
On 6/26/2013 3:46 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Jun 26, 2013 at 02:59:14PM +0530, George Cherian wrote:
>> There can be configurations in which DWC3 is hoooked up only to USB2 PHY.
>> In such cases we should not return -EPROBE_DEFER, rather continue probe
>> even if there is no USB3 PHY.
>>
>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> ---
>> drivers/usb/dwc3/core.c | 31 ++++++++++++++++++++++++-------
>> 1 file changed, 24 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index c35d49d..d5e6f3e 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -100,7 +100,9 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>> dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>>
>> usb_phy_init(dwc->usb2_phy);
>> - usb_phy_init(dwc->usb3_phy);
>> +
>> + if (dwc->usb3_phy)
>> + usb_phy_init(dwc->usb3_phy);
> I would feel more comfortable if you would move our maximum_speed module
> parameter to DT with a property such as:
>
> snps,maximum_speed = "highspeed";
>
> then on driver you could:
okay
> ret = of_property_read_string(np, "snps,maximum_speed", &maximum_speed);
> if (ret < 0)
> bailout();
>
> if (strncmp(maximum_speed, "superspeed", 10) == 0) {
> /* grab USB3 PHY, return EPROBE_DEFER if not found */
> grab_usb3_phy();
> }
>
> if ((strncmp(maximum_speed, "highspeed", 9) == 0) ||
> (strncmp(maximum_speed, "fullspeed", 9) == 0) ||
> (strncmp(maximum_speed, "lowspeed", 8) == 0)) {
> /* grab USB2 PHY, return EPROBE_DEFER if not found */
> grab_usb2_phy();
> }
>
> this way, we depend solely on setting maximum_speed to highspeed for
> AM437x :-)
In dra7xx one instance is superspeed and one instance highspeed.
>
> ps: don't forget to default to superspeed in case no property is passed.
okay
Regards
-George


\
 
 \ /
  Last update: 2013-06-26 18:21    [W:0.419 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site