lkml.org 
[lkml]   [2013]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 5/9] ARM: OMAP: USB: Add phy binding information
Hi,

On Tuesday 18 June 2013 03:57 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Jun 18, 2013 at 03:34:36PM +0530, Kishon Vijay Abraham I wrote:
>> On Tuesday 18 June 2013 03:14 PM, Felipe Balbi wrote:
>>> On Thu, Jun 13, 2013 at 02:13:55PM +0530, Kishon Vijay Abraham I wrote:
>>>> In order for controllers to get PHY in case of non dt boot, the phy
>>>> binding information (phy device name) should be added in the platform
>>>> data of the controller.
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>
>>> I would rather not pass strings around, any other way to handle this ?
>>> Why do you need to pass this string ?
>>
>> Our old way of binding the controller and the phy using device name
>> started creating problems after the devices are created using
>> PLATFORM_DEVID_AUTO. Infact non-dt boot is broken in mainline for
>> OMAP3 platforms for which I have posted a RFC series
>> http://www.serverphorums.com/read.php?12,708632 which also uses
>> strings.
>> I'm not sure of any other way to deal with this.
>
> have you checked how other frameworks handle it ? Regulator has some
> sort of binding in board-files, but I guess it passes the regulator
> name?

From whatever I could make of, regulator has 3 ways to get the
regulator one of which is using the binding in board-files (but it also
uses device name which could create the same problem that we are facing).

1.) from dt data
2.) from _supply_ name
3.) from binding in board file

(referred regulator_dev_lookup() in regulator/core.c)

Thanks
Kishon


\
 
 \ /
  Last update: 2013-06-18 13:42    [W:0.036 / U:4.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site