lkml.org 
[lkml]   [2013]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/5] clk: divider: replace bitfield width with mask
On Sun, Jun 16, 2013 at 07:58:21PM -0700, Mike Turquette wrote:
> The forthcoming Device Tree binding for the divider clock type will use
> a bitfield mask instead of bitfield width, which is what the current
> basic divider implementation uses.
>
> This patch replaces the u8 width in struct clk_divider with a u32 mask.
> The divider code is updated to use the bit mask internally but the two
> registration functions still accept the width to maintain compatibility
> with existing users.
>
> Also updated in this patch is the clk-private.h divider macro and two
> Freescale clock divider implementations that are based on struct
> clk_divider.
>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Signed-off-by: Mike Turquette <mturquette@linaro.org>
> ---
> No change since v1, new patch
>
> arch/arm/mach-imx/clk-busy.c | 2 +-
> drivers/clk/clk-divider.c | 31 +++++++++++++++----------------
> drivers/clk/mxs/clk-div.c | 2 +-
> include/linux/clk-private.h | 2 +-
> include/linux/clk-provider.h | 2 +-
> 5 files changed, 19 insertions(+), 20 deletions(-)

On imx and mxs,

Tested-by: Shawn Guo <shawn.guo@linaro.org>



\
 
 \ /
  Last update: 2013-06-17 18:01    [W:0.112 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site