lkml.org 
[lkml]   [2013]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] arm: dt: zynq: Add support for the zc706 platform
Date
Add a DT fragment for the zc706 Zynq platform and a corresponding
target to the Makefile.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
v3:
- adding the 'status' override for the UART node
- changing the console device to ttyPS0

arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/zynq-zc706.dts | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/zynq-zc706.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f0895c5..2823027 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -208,7 +208,8 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
+ zynq-zc706.dtb

targets += dtbs
targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
new file mode 100644
index 0000000..79009e0
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2011 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ * Copyright (C) 2013 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC706 Development Board";
+ compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
--
1.8.3


\
 
 \ /
  Last update: 2013-06-13 22:01    [W:0.051 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site