Messages in this thread | | | Date | Mon, 10 Jun 2013 17:52:33 -0500 | From | Scott Wood <> | Subject | Re: [BUG] PCI related panic on powerpc based board with 3.10-rcX |
| |
On 06/10/2013 12:07:43 PM, Michael Guntsche wrote: > Good evening, > > On Mon, Jun 10, 2013 at 1:41 PM, Rojhalat Ibrahim <imr@rtschenk.de> > wrote: > > Hi Mike, > > > > could you please try this patch: > > https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-May/106624.html > > http://patchwork.ozlabs.org/patch/244515/ > > > > Rojhalat > > > > > > On Saturday 08 June 2013 21:39:37 Michael Guntsche wrote: > >> After bisecting I found the responsible commit. > >> > >> 50d8f87d2b3: powerpc/fsl-pci Make PCIe hotplug work with Freescale > >> PCIe controllers > >> > >> Reverting this commit allowed my board to boot again. > >> > >> @Rojhalat: Please have a look at > >> http://marc.info/?l=linux-kernel&m=137071294204858&w=2 > >> for my initial bugreport. > >> > >> What I do not understand at all is why this is affecting my > platform. > >> AFAIK there is no PCIe hardware on it AND I completely disabled > PCIe > >> support in config. > >> > >> Kind regards, > >> Mike > > This patch does not fix the problem, during boot the kernel still > panics. I had a closer look at the commit and the following patch > fixes it for me.... > > diff --git a/arch/powerpc/sysdev/fsl_pci.c > b/arch/powerpc/sysdev/fsl_pci.c > index 028ac1f..21b687f 100644 > --- a/arch/powerpc/sysdev/fsl_pci.c > +++ b/arch/powerpc/sysdev/fsl_pci.c > @@ -814,7 +814,7 @@ int __init mpc83xx_add_bridge(struct device_node > *dev) > if (ret) > goto err0; > } else { > - fsl_setup_indirect_pci(hose, rsrc_cfg.start, > + setup_indirect_pci(hose, rsrc_cfg.start, > rsrc_cfg.start + 4, 0); > }
The only difference here is that you're not setting hose->ops to fsl_indirect_pci_ops. Do you know why that is helping, and what hose->ops is set to instead?
-Scott
| |