lkml.org 
[lkml]   [2013]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 100/118] USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
Date
3.5.7.12 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Thomasset <adrian.thomasset@st.com>

commit 71d9a2b95fc9c9474d46d764336efd7a5a805555 upstream.

The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.

We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
drivers/usb/serial/ftdi_sio.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ecfd525..d5b9a74 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1799,20 +1799,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
}

/*
- * First and second port on STMCLiteadaptors is reserved for JTAG interface
- * and the forth port for pio
+ * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
+ * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
+ * can be accessed from userspace.
+ * The next two ports are enabled as UARTs by default, where port 2 is
+ * a conventional RS-232 UART.
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;

- if (interface == udev->actconfig->interface[2])
- return 0;
-
- dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ if (interface == udev->actconfig->interface[0] ||
+ interface == udev->actconfig->interface[1]) {
+ dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ return -ENODEV;
+ }

- return -ENODEV;
+ return 0;
}

/*
--
1.8.1.2


\
 
 \ /
  Last update: 2013-05-07 16:45    [W:0.306 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site