lkml.org 
[lkml]   [2013]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask
On 23/05/2013 10:38, Johan Hovold :
> This is an update of the shadow-interrupt-mask series against v3.10-rc2.
>
> I guess we need Atmel to confirm that all sam9x5 SoCs are indeed
> affected. If not, then some probing mechanism as the one Doug suggested
> could be implemented on top of (a subset of) these patches. What do you
> say, Nicolas?

No probing mechanism is needed: only sam9x5 are affected.

> Note that the first patch (adding a missing OF compile guard) could be
> applied straight away.
>
> Thanks,
> Johan
>
>
> v3:
> - rebase against v3.10-rc2
> - remove some comments

Thanks for rebasing this series.

Best regards,

> v2:
> - rebase on top of DT-support patch by Joachim Eastwood
> - add missing brace in DT-id table
>
>
> Johan Hovold (5):
> rtc-at91rm9200: add match-table compile guard
> rtc-at91rm9200: add configuration support
> rtc-at91rm9200: refactor interrupt-register handling
> rtc-at91rm9200: add shadow interrupt mask
> rtc-at91rm9200: use shadow IMR on at91sam9x5
>
> .../bindings/rtc/atmel,at91rm9200-rtc.txt | 2 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
> drivers/rtc/rtc-at91rm9200.c | 131 +++++++++++++++++----
> 3 files changed, 113 insertions(+), 22 deletions(-)
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-05-30 10:21    [W:0.252 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site