lkml.org 
[lkml]   [2013]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/2] watchdog: New watchdog driver for MEN A21 watchdogs
Hi Johannes,

> On Mon, May 27, 2013 at 08:25:54PM +0200, Wim Van Sebroeck wrote:
> [...]
> > > + watchdog_set_drvdata(&a21_wdt, drv);
> >
> > I am missing the initialisation of the watchdog's timeout value here...
>
> This watchdog only knows two timeout values, 1s and 30s with the constraint
> that you can't go back to 30s once your in a 1s timeout without a reset of the
> CPLD. I could initially set it to 30s but that would be redundant.

Yes, but if I use a WDIOC_GETTIMEOUT ioctl call then I will get 0 because
you didn't initialize a21_wdt.timeout so you don't know wether or not
it's 30 or 1.

You can also set it default to 1 and use a timer to do the bridge between userspace
and an in kernel timer of 0.5msec. (see git/linux-watchdog/drivers/watchdog/pika_wdt.c
as an example).

Kind regards,
Wim.



\
 
 \ /
  Last update: 2013-05-31 00:01    [W:0.192 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site