lkml.org 
[lkml]   [2013]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] regulator: palmas: enable all modes for SMPS10
Hi,

On Thursday 30 May 2013 05:02 PM, Mark Brown wrote:
> On Thu, May 30, 2013 at 04:26:33PM +0530, Kishon Vijay Abraham I wrote:
>
>> Only compile tested. Just sent a patch to get some comments
>> /ideas on how to handle such one off regulators.
>> to handle
>
> What's unclear or confusing? This all looks really basic...

For instance mapping of regulator modes to smps10 modes is unclear.
>
>> + palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, &reg);
>> + reg &= ~PALMAS_SMPS10_CTRL_MODE_ACTIVE_MODE_MASK;
>> +
>> + if (mode == REGULATOR_MODE_NORMAL)
>> + reg |= SMPS10_BOOST_EN;
>> +
>> + if (mode == REGULATOR_MODE_FAST)
>> + reg |= SMPS10_SWITCH_EN;
>> +
>> + if (mode == REGULATOR_MODE_IDLE)
>> + reg |= SMPS10_BYPASS_EN;
>> +
>> + palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
>> + return 0;
>
> This looks like a switch statement and isn't there an update bits
> operation?

There can be multiple modes set at the same time. Having switch
statement means we would need to call the same API multiple times to set
the mode. There isn't a palmas wrapper to regmap_update_bits. I can send
a patch to add a palmas wrapper.

Thanks
Kishon


\
 
 \ /
  Last update: 2013-05-30 15:41    [W:0.954 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site