lkml.org 
[lkml]   [2013]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] clk: si5351: Set initial clkout rate when defined in platform data.
On 05/03/2013 07:53 AM, Marek Belisko wrote:
> Signed-off-by: Marek Belisko<marek.belisko@streamunlimited.com>
> ---
> Changes v1->v2:
> - update commit message and comment to refer to platform data not DT

Marek,

except that the commit msg itself is very short (there is no!) you can
add my

Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Next time sending patches for clk-si5351, please ensure you are using
get_maintainers.pl and add me to the list of people to Cc also.

Sebastian

> drivers/clk/clk-si5351.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
> index cf39e53..24f5536 100644
> --- a/drivers/clk/clk-si5351.c
> +++ b/drivers/clk/clk-si5351.c
> @@ -1477,6 +1477,16 @@ static int si5351_i2c_probe(struct i2c_client *client,
> return -EINVAL;
> }
> drvdata->onecell.clks[n] = clk;
> +
> + /* set initial clkout rate */
> + if (pdata->clkout[n].rate != 0) {
> + int ret;
> + ret = clk_set_rate(clk, pdata->clkout[n].rate);
> + if (ret != 0) {
> + dev_err(&client->dev, "Cannot set rate : %d\n",
> + ret);
> + }
> + }
> }
>
> ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,



\
 
 \ /
  Last update: 2013-05-03 12:21    [W:0.042 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site