lkml.org 
[lkml]   [2013]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS
Hi Dan,

On 5/24/2013 8:56 PM, Dan Murphy wrote:
> On 05/17/2013 11:17 AM, Dan Murphy wrote:
>> On 05/17/2013 11:15 AM, Nishanth Menon wrote:
>>> On 11:02-20130517, Dan Murphy wrote:
>>>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
>>>> are different.
>>>>
>>>> A1-A3 = gpio_wk7
>>>> ES = gpio_110
>>>>
>>>> There is no change to LED D2
>>>>
>>>> Abstract away the pinmux and the LED definitions for the two boards into
>>>> the respective DTS files.
>>>>
>>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>>> ---
>>>> Changes in this version:
>>>> - review comments incorporated.
>>>> Previous version of this patch was discussed in:
>>>> https://patchwork.kernel.org/patch/2582771/
>>> one minor nit,
>>> $subject could do with space after the ':'
>>> otherwise, it looks fine to me. Will suggest waiting for further
>>> reviewers if they have an opinion prior to a new rev.
>> Thanks NM I will queue up this change locally and await further review prior to sending v7.
>>
>>>> arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++++++-
>>>> arch/arm/boot/dts/omap4-panda-es.dts | 28 ++++++++++++++++++++++++++++
>>>> 2 files changed, 43 insertions(+), 1 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>>> index 03bd60d..5fd59b3 100644
>>>> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
>>>> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
>>>> @@ -16,8 +16,13 @@
>>>> reg = <0x80000000 0x40000000>; /* 1 GB */
>>>> };
>>>>
>>>> - leds {
>>>> + leds: leds {
>>>> compatible = "gpio-leds";
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <
>>>> + &led_wkgpio_pins
>>>> + >;
>>>> +
>>>> heartbeat {
>>>> label = "pandaboard::status1";
>>>> gpios = <&gpio1 7 0>;
>>>> @@ -137,6 +142,15 @@
>>>> };
>>>> };
>>>>
>>>> +&omap4_pmx_wkup {
>>>> + led_wkgpio_pins: pinmux_leds_wkpins {
>>>> + pinctrl-single,pins = <
>>>> + 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
>>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>>>> + >;
>>>> + };
>>>> +};
>>>> +
>>>> &i2c1 {
>>>> pinctrl-names = "default";
>>>> pinctrl-0 = <&i2c1_pins>;
>>>> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
>>>> index f1d8c21..c968a3b 100644
>>>> --- a/arch/arm/boot/dts/omap4-panda-es.dts
>>>> +++ b/arch/arm/boot/dts/omap4-panda-es.dts
>>>> @@ -34,3 +34,31 @@
>>>> 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>>>> >;
>>>> };
>>>> +
>>>> +&omap4_pmx_core {
>>>> + led_gpio_pins: gpio_led_pmx {
>>>> + pinctrl-single,pins = <
>>>> + 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
>>>> + >;
>>>> + };
>>>> +};
>>>> +
>>>> +&led_wkgpio_pins {
>>>> + pinctrl-single,pins = <
>>>> + 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
>>>> + >;
>>>> +};
>>>> +
>>>> +&leds {
>>>> + pinctrl-0 = <
>>>> + &led_gpio_pins
>>>> + &led_wkgpio_pins
>>>> + >;
>>>> +
>>>> + heartbeat {
>>>> + gpios = <&gpio4 14 0>;
>>>> + };
>>>> + mmc {
>>>> + gpios = <&gpio1 8 0>;
>>>> + };
>>>> +};
>>
> Any additional comments besides the headline?
>
> If not I will post v7

Sorry for the delay.

Go ahead and I'll take it in my dts branch for 3.11.

Thanks,
Benoit



\
 
 \ /
  Last update: 2013-05-29 12:21    [W:0.251 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site