lkml.org 
[lkml]   [2013]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] serial: Add Option GTM681W to qcserial device table.
Date
Richard Weinberger <richard@nod.at> writes:
> Am 24.05.2013 15:18, schrieb Bjørn Mork:
>> Richard Weinberger <richard@nod.at> writes:
>>
>>> The Option GTM681W uses a qualcomm chip and can be
>>> served by the qcserial device driver.
>>
>> Should it also be added to the qmi_wwan driver?
>
> Don't know. But I can happily test it. :)
> Can you please explain me how to use the qmi_wwan driver?
> I've never used it.

The QMI management protocol is delegated to userspace using a
/dev/cdc-wdmX character device. So you need a userspace component to
test the driver, like for example libqmi. See
http://sigquit.wordpress.com/2012/08/20/an-introduction-to-libqmi/ for a
short intro.

This library is packaged in Debian. Don't know the status of other
distros.

The driver supports dynamic device IDs, so if you have qcserial bound to
all serial ports, and there is a QMI interface with no driver bound yet,
then testing should be as easy as

modprobe qmi_wwan
echo "0af0 8120" >/sys/bus/usb/drivers/qmi_wwan/new_id
qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer



Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-05-24 21:21    [W:0.059 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site