Messages in this thread Patch in this message | | | Date | Fri, 24 May 2013 09:53:07 -0300 | From | Emilio López <> | Subject | Re: [PATCHv3 5/6] ARM: cubieboard: Enable ethernet (EMAC) support in dts |
| |
Hi,
El 24/05/13 06:23, Maxime Ripard escribió: > From: Stefan Roese <sr@denx.de> > > Signed-off-by: Stefan Roese <sr@denx.de> > --- > arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > index b70fe0d..32d9b18 100644 > --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > @@ -27,6 +27,21 @@ > }; > > soc@01c20000 { > + emac: ethernet@01c0b000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&emac_pins_a>; > + phy = <&phy0>; > + status = "okay"; > + }; > + > + mdio@01c0b080 { > + status = "okay"; > + > + phy0: ethernet-phy@0 { > + reg = <0>; > + };
During my testing I found out that I needed to use 1 as reg for the driver to work. You can find a fixup patch enclosed that changes this; it's possible that some extra changes may also be needed (s/phy0/phy1/ on the node?)
Cheers,
Emilio From f8a76c66fff0700e3c87f89b8b250effc0f2b37f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar> Date: Fri, 17 May 2013 10:11:48 -0300 Subject: [PATCH] fixup! ARM: cubieboard: Enable ethernet (EMAC) support in dts
--- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index cd69799..21f0197 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -38,7 +38,7 @@ status = "okay"; phy0: ethernet-phy@0 { - reg = <0>; + reg = <1>; }; }; -- 1.8.1.6
| |