lkml.org 
[lkml]   [2013]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RFC v3 1/3] i2c: i2c-bfin-twi: convert to devm_* API
From
On 23 May 2013 17:30, Libo Chen <libo.chen@huawei.com> wrote:
> peripheral_request_list has got free if any one faild, so no need to free again in err case.
> aovid this, convert them to devm_* API
>
> Signed-off-by: Libo Chen <libo.chen@huawei.com>

It is a good practice to include changelog while submitting revised
versions of the patch.

> ---
> drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++---------------------------
> 1 files changed, 10 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
> index 05080c4..2b99c48 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
> int rc;
> unsigned int clkhilow;
>
> - iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
> + iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
> + GFP_KERNEL);
> if (!iface) {
> dev_err(&pdev->dev, "Cannot allocate memory\n");

This error message is not really required.

> - rc = -ENOMEM;
> - goto out_error_nomem;
> + return -ENOMEM;
> }
>
> spin_lock_init(&(iface->lock));
>
> /* Find and map our resources */
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (res == NULL) {
> - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
> - rc = -ENOENT;
> - goto out_error_get_res;
> - }
> -
> - iface->regs_base = ioremap(res->start, resource_size(res));
> - if (iface->regs_base == NULL) {
> + iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(iface->regs_base)) {
> dev_err(&pdev->dev, "Cannot map IO\n");

devm_ioremap_resource prints out the error messages. So the above line
is redundant.

> - rc = -ENXIO;
> - goto out_error_ioremap;
> + return -ENXIO;

Why not return PTR_ERR(iface->regs_base)?

> }
>
> iface->irq = platform_get_irq(pdev, 0);
> if (iface->irq < 0) {
> dev_err(&pdev->dev, "No IRQ specified\n");
> - rc = -ENOENT;
> - goto out_error_no_irq;
> + return -ENOENT;
> }
>
> p_adap = &iface->adap;
> @@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
> "i2c-bfin-twi");
> if (rc) {
> dev_err(&pdev->dev, "Can't setup pin mux!\n");
> - goto out_error_pin_mux;
> + return rc;
> }
>
> - rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
> + rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
> 0, pdev->name, iface);
> if (rc) {
> dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
> @@ -707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
> return 0;
>
> out_error_add_adapter:
> - free_irq(iface->irq, iface);
> out_error_req_irq:
> -out_error_no_irq:
> peripheral_free_list((unsigned short *)pdev->dev.platform_data);
> -out_error_pin_mux:
> - iounmap(iface->regs_base);
> -out_error_ioremap:
> -out_error_get_res:
> - kfree(iface);
> -out_error_nomem:
> +

Empty line not required.

You could probably combine all the empty labels into one meaningful label above.

> return rc;


--
With warm regards,
Sachin


\
 
 \ /
  Last update: 2013-05-24 06:01    [W:0.073 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site