lkml.org 
[lkml]   [2013]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/6] MIPS: jz4740: Acquire and enable DMA controller clock
Date
From: Maarten ter Huurne <maarten@treewalker.org>

Previously, it was assumed that the DMA controller clock is not gated
when the kernel starts running. While that is the power-on state, it is
safer to not rely on that.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
arch/mips/jz4740/dma.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
index 317ec6f..0e34b97 100644
--- a/arch/mips/jz4740/dma.c
+++ b/arch/mips/jz4740/dma.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/clk.h>
#include <linux/interrupt.h>

#include <linux/dma-mapping.h>
@@ -268,6 +269,7 @@ static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)

static int jz4740_dma_init(void)
{
+ struct clk *clk;
unsigned int ret;

jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
@@ -277,11 +279,29 @@ static int jz4740_dma_init(void)

spin_lock_init(&jz4740_dma_lock);

- ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
+ clk = clk_get(NULL, "dma");
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ printk(KERN_ERR "JZ4740 DMA: Failed to request clock: %d\n",
+ ret);
+ goto err_iounmap;
+ }

- if (ret)
+ ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
+ if (ret) {
printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
+ goto err_clkput;
+ }
+
+ clk_prepare_enable(clk);
+
+ return 0;
+
+err_clkput:
+ clk_put(clk);

+err_iounmap:
+ iounmap(jz4740_dma_base);
return ret;
}
arch_initcall(jz4740_dma_init);
--
1.8.2.1


\
 
 \ /
  Last update: 2013-05-23 23:21    [W:0.065 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site