lkml.org 
[lkml]   [2013]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 035/136 ] i2c: xiic: must always write 16-bit words to TX_FIFO
3.6.11.4 stable review patch.
If anyone has any objections, please let me know.

------------------

From: "Steven A. Falco" <sfalco@harris.com>

[ Upstream commit c39e8e4354ce4daf23336de5daa28a3b01f00aa6 ]

The TX_FIFO register is 10 bits wide. The lower 8 bits are the data to be
written, while the upper two bits are flags to indicate stop/start.

The driver apparently attempted to optimize write access, by only writing a
byte in those cases where the stop/start bits are zero. However, we have
seen cases where the lower byte is duplicated onto the upper byte by the
hardware, which causes inadvertent stop/starts.

This patch changes the write access to the transmit FIFO to always be 16 bits
wide.

Signed off by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
drivers/i2c/busses/i2c-xiic.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 641d0e5..15d20de 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -312,10 +312,8 @@ static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
/* last message in transfer -> STOP */
data |= XIIC_TX_DYN_STOP_MASK;
dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
-
- xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
- } else
- xiic_setreg8(i2c, XIIC_DTR_REG_OFFSET, data);
+ }
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
}
}

--
1.7.10.4



\
 
 \ /
  Last update: 2013-05-18 04:41    [W:0.497 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site