[lkml]   [2013]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers
On Thursday 16 May 2013, Daniel Tang wrote:
> On 16/05/2013, at 12:07 AM, Arnd Bergmann <> wrote:
> > You are missing a binding in Documentation/devicetree, same as for some of
> > the other drivers in this series.
> Should we be adding a vendor prefix to it too? If so, we're not sure whether
> to use "ti," or not since this isn't an official port by TI.

The binding describes the hardware, it should not matter who does the port.
However, any part of the tree that is not actually from TI should have a
vendor prefix indicating who made that part. IIRC, the SoC used in there
is from TI, so you should use something else for the on-soc components.

> > It seems strange to assign the clk_name variable to node->name
> > first and then overriding it with the clock-output-names property.
> > Is that intentional? If so, please explain it in a comment.
> >
> I copied that bit of boilerplate from drivers/clk/clk-fixed-rate.c but
> I'm guessing it's to use the node name as the clock name unless there
> is a property called "clock-output-names"

Ah, I see. It seems you forgot to add the clock maintainer to Cc in the
mail. Mike is the one who will have to take you patch anyway, so I assume
he will comment on this if you did it wrong.


 \ /
  Last update: 2013-05-16 15:21    [W:0.150 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site