lkml.org 
[lkml]   [2013]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] ARM: at91: add Acme Systems Aria G25 board
Date
From: Douglas Gilbert <dgilbert@interlog.com>

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Hi all,

Here is the third revision of this patch. I plan to include it in a
pull-request real-soon-now!

v3: - move to "at91-" prefix for .dts[i] files
- remove the rtc activation code because of the ongoing discussions
about this IP and its DT binding.

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-ariag25.dts | 171 +++++++++++++++++++++++++++++++++++++
2 files changed, 172 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-ariag25.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4c7f8a8..b07f162 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
# sam9n12
dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
new file mode 100644
index 0000000..c7aebba
--- /dev/null
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -0,0 +1,171 @@
+/*
+ * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
+ * Robert Nelson <robertcnelson@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g25.dtsi"
+
+/ {
+ model = "Acme Systems Aria G25";
+ compatible = "acme,ariag25", "atmel,at91sam9x5ek",
+ "atmel,at91sam9x5", "atmel,at91sam9";
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &uart0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+ };
+
+ memory {
+ /* 128 MB, change this for 256 MB revision */
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0008000 {
+ /* N.B. Aria has no SD card detect (CD), assumed present */
+
+ pinctrl-0 = <
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
+ i2c0: i2c@f8010000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f8014000 {
+ status = "okay";
+ };
+
+ /* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+ usart0: serial@f801c000 {
+ pinctrl-0 = <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts>;
+ status = "okay";
+ };
+
+ usart1: serial@f8020000 {
+ pinctrl-0 = <&pinctrl_usart1
+ /* &pinctrl_usart1_rts */
+ /* &pinctrl_usart1_cts */
+ >;
+ status = "okay";
+ };
+
+ usart2: serial@f8024000 {
+ /* cannot activate RTS2+CTS2, clash with
+ * ethernet on PB0 and PB1 */
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "okay";
+ };
+
+ usart3: serial@f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <8 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3
+ /* &pinctrl_usart3_rts */
+ /* &pinctrl_usart3_cts */
+ >;
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ /*
+ * following can be overwritten by bootloader:
+ * for example u-boot 'ftd set' command
+ */
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+ };
+
+ uart0: serial@f8040000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8040000 0x200>;
+ interrupts = <15 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+ };
+
+ adc0: adc@f804c000 {
+ status = "okay";
+ atmel,adc-channels-used = <0xf>;
+ atmel,adc-num-channels = <4>;
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ w1_0 {
+ pinctrl_w1_0: w1_0-0 {
+ atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+ };
+ };
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* little green LED in middle of Aria G25 module */
+ aria_led {
+ label = "aria_led";
+ gpios = <&pioB 8 0>; /* PB8 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ };
+
+ onewire@0 {
+ compatible = "w1-gpio";
+ gpios = <&pioA 21 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_w1_0>;
+ };
+};
--
1.8.0


\
 
 \ /
  Last update: 2013-04-04 18:01    [W:0.688 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site