lkml.org 
[lkml]   [2013]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: sun5i: Update the clock compatible strings
Hi Maxime,

El 30/04/13 06:56, Maxime Ripard escribió:
> The Allwinner A13 has a smaller clock set than the one found in the A10.
> Fix the A13 device tree and documentation to reflect this.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The patch looks fine to me.

Acked-by: Emilio López <emilio@elopez.com.ar>

> ---
> arch/arm/boot/dts/sun5i-a13.dtsi | 35 ++++++++++++-----------------------
> 1 file changed, 12 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index 31fa38f..8ba65c1 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -95,20 +95,15 @@
>
> ahb_gates: ahb_gates@01c20060 {
> #clock-cells = <1>;
> - compatible = "allwinner,sun4i-ahb-gates-clk";
> + compatible = "allwinner,sun5i-a13-ahb-gates-clk";
> reg = <0x01c20060 0x8>;
> clocks = <&ahb>;
> - clock-output-names = "ahb_usb0", "ahb_ehci0",
> - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
> - "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
> - "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
> - "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
> - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
> - "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
> - "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
> - "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
> - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
> - "ahb_de_fe1", "ahb_mp", "ahb_mali400";
> + clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",

Should we keep the USB and DE names consistent between sun4i and sun5i?
Nobody should be referencing them by name, however, so it wouldn't cause
any issues on the long run.

> + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
> + "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
> + "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
> + "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
> + "ahb_de_fe", "ahb_iep", "ahb_mali400";
> };
>
> apb0: apb0@01c20054 {
> @@ -120,15 +115,13 @@
>
> apb0_gates: apb0_gates@01c20068 {
> #clock-cells = <1>;
> - compatible = "allwinner,sun4i-apb0-gates-clk";
> + compatible = "allwinner,sun5i-a13-apb0-gates-clk";
> reg = <0x01c20068 0x4>;
> clocks = <&apb0>;
> - clock-output-names = "apb0_codec", "apb0_spdif",
> - "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
> - "apb0_ir1", "apb0_keypad";
> + clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
> };
>
> - /* dummy is pll62 */
> + /* dummy is pll6 */
> apb1_mux: apb1_mux@01c20058 {
> #clock-cells = <0>;
> compatible = "allwinner,sun4i-apb1-mux-clk";
> @@ -145,15 +138,11 @@
>
> apb1_gates: apb1_gates@01c2006c {
> #clock-cells = <1>;
> - compatible = "allwinner,sun4i-apb1-gates-clk";
> + compatible = "allwinner,sun5i-a13-apb1-gates-clk";
> reg = <0x01c2006c 0x4>;
> clocks = <&apb1>;
> clock-output-names = "apb1_i2c0", "apb1_i2c1",
> - "apb1_i2c2", "apb1_can", "apb1_scr",
> - "apb1_ps20", "apb1_ps21", "apb1_uart0",
> - "apb1_uart1", "apb1_uart2", "apb1_uart3",
> - "apb1_uart4", "apb1_uart5", "apb1_uart6",
> - "apb1_uart7";
> + "apb1_i2c2", "apb1_uart1", "apb1_uart3";
> };
> };
>
>

Thanks,

Emilio
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-04-30 14:41    [W:0.059 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site