lkml.org 
[lkml]   [2013]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: at91: add Acme Systems Aria G25 board
On 13-04-02 02:48 PM, Olof Johansson wrote:
> Hi,
>
> I just saw this since it came in through a pull request
>
> On Tue, Mar 26, 2013 at 4:39 AM, Nicolas Ferre <nicolas.ferre@atmel.com> wrote:
>> From: Douglas Gilbert <dgilbert@interlog.com>
>>
>> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>> arch/arm/boot/dts/ariag25.dts | 175 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 175 insertions(+)
>> create mode 100644 arch/arm/boot/dts/ariag25.dts
>>
>> diff --git a/arch/arm/boot/dts/ariag25.dts b/arch/arm/boot/dts/ariag25.dts
>> new file mode 100644
>> index 0000000..b43266f
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/ariag25.dts
>
> Please prefix the boards with the platform. Most other SoCs already do
> this, and I see now that some at91 boards haven't been prefixed in the
> past, but it's a good idea to not add more of them.
>
> So, at91-ariag25.dts is a good name in this case.

That is fine with me. I have changed my working DT
config file to at91-ariag25.dts and will push that
out to Robert Nelson soon.

Also I'm working on a DT version of an existing Acme
product called the FoxG20 which is based on the
AT91SAM9G20 SoC. It already has non-DT support inside
the mainline kernel. I am using at91-foxg20.dts for
its DT config file.

Doug Gilbert




\
 
 \ /
  Last update: 2013-04-03 22:03    [W:0.083 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site