lkml.org 
[lkml]   [2013]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [tpmdd-devel] tpm tis driver failed to su spend, error -62
2013-04-23 18:29 skrev Kent Yoder:
> On Tue, Apr 23, 2013 at 10:03 AM, <peterasplund@gentoo.se> wrote:
>> 2013-04-23 16:43 skrev Kent Yoder:
>>
>>> On Tue, Apr 23, 2013 at 04:30:53PM +0200, peterasplund@gentoo.se
>>> wrote:
>>>>
>>>> 2013-04-11 23:41 skrev Kent Yoder:
>>>> >On Sat, Apr 06, 2013 at 06:00:59PM +0200, peterasplund@gentoo.se
>>>> >wrote:
>>>> >>2013-04-02 16:03 skrev Kent Yoder:
>>>> >>>Hi Peter,
>>>> >>>
>>>> >>>On Mon, Apr 1, 2013 at 4:17 PM, <peterasplund@gentoo.se>
>>>> wrote:
>>>> >>>>2013-03-28 14:12 skrev Peter.Huewe@infineon.com:
>>>> >>>>>What also might be worth a look - in your bugzilla it states:
>>>> >>>>>[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
>>>> >>>>>PNP0c31
>>>> >>>>>(active)
>>>> >>>>>[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> >>>>>[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
>>>> >>>>>[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred
>>>> >>attempting to
>>>> >>>>>read a pcr
>>>> >>>>>value
>>>> >>>>>[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
>>>> >>>>>
>>>> >>>>>
>>>> >>>>>Can you perhaps try to enable your TPM in the BIOS? It's
>>>> quite
>>>> >>>>>often
>>>> >>>>>hidden under "embedded security device" or "system security".
>>>> >>>>>Quite often you have to have a bios password set to access
>>>> these
>>>> >>>>>settings.
>>>> >>>>>If your system does not have bios support for TPMs, please
>>>> >>>>>tell me so
>>>> >>>>>and I'll try to help you out.
>>>> >>>>>
>>>> >>>>
>>>> >>>>I've enabled it in BIOS now, and the output seems to be a bit
>>>> >>>>different. Not too uplifting though...
>>>> >>>>
>>>> >>>>root@zepto:/home/peter# dmesg | grep tpm
>>>> >>>>[ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id
>>>> 16)
>>>> >>>>[ 14.748276] tpm_tis 00:08: Adjusting TPM timeout
>>>> parameters.
>>>> >>>>[ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error
>>>> -62
>>>> >>>>[ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error
>>>> -62
>>>> >>>>[ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error
>>>> -62
>>>> >>>>root@zepto:/home/peter# tpm_version
>>>> >>>>Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011
>>>> >>(17),
>>>> >>>>Communication failure
>>>> >>>>root@zepto:/home/peter# tcsd -f
>>>> >>>>TCSD TDDL ioctl: (25) Inappropriate ioctl for device
>>>> >>>>TCSD TDDL Falling back to Read/Write device support.
>>>> >>>>TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer
>>>> expired
>>>> >>>>TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
>>>> >>>
>>>> >>> Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan
>>>> Pryvalov
>>>> >>>reported that his TPM showed values that were too small to keep
>>>> >>from
>>>> >>>causing timeouts waiting on TPM commands, but too big to
>>>> >>trigger the
>>>> >>>driver's code to scale them. (He saw 12000 for the 3 timeout
>>>> >>>values.)
>>>> >>>
>>>> >>Hi Kent
>>>> >>
>>>> >>The values I'm seeing are:
>>>> >>
>>>> >>root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
>>>> >>752000 2000000 752000 752000 [adjusted]
>>>> >>
>>>> >>So I guess these are within a normal range?
>>>> >
>>>> > Yes, these look normal. So it seems you can send commands to
>>>> the
>>>> >TPM
>>>> >up until you try to suspend? Can you try to cat other files like
>>>> >/sys/class/misc/tpm0/device/pcrs? This is the simplest way to
>>>> send
>>>> >some
>>>> >command to the TPM...
>>>> >
>>>> >Kent
>>>> >
>>>>
>>>> Hi Kent, I'm sorry I haven't replied to this message before. I
>>>> must
>>>> have missed it!
>>>>
>>>> root@zepto:/sys/class/misc/tpm0# ll
>>>> drwxr-xr-x 3 root root 0 Apr 23 16:20 ./
>>>> drwxr-xr-x 3 root root 0 Apr 23 16:20 ../
>>>> -r--r--r-- 1 root root 4096 Apr 23 16:26 dev
>>>> lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/
>>>> drwxr-xr-x 2 root root 0 Apr 23 16:26 power/
>>>> lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem ->
>>>> ../../../../../class/misc/
>>>> -rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
>>>>
>>>> root@zepto:/sys/class/misc/tpm0# cat dev
>>>> 10:224
>>>> root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing
>>>> after a delay of a second or so)
>>>> root@zepto:/sys/class/misc/tpm0# cat uevent
>>>> MAJOR=10
>>>> MINOR=224
>>>> DEVNAME=tpm0
>>>> root@zepto:/sys/class/misc/tpm0# cat device/active
>>>> root@zepto:/sys/class/misc/tpm0# cat device/cancel
>>>> cat: device/cancel: Permission denied
>>>> root@zepto:/sys/class/misc/tpm0# cat device/caps
>>>> root@zepto:/sys/class/misc/tpm0# cat device/durations
>>>> 1000000 4000000 152000000 [adjusted]
>>>> root@zepto:/sys/class/misc/tpm0# cat device/enabled
>>>> root@zepto:/sys/class/misc/tpm0# cat device/id
>>>> IFX0102
>>>> PNP0c31
>>>> root@zepto:/sys/class/misc/tpm0# cat device/options
>>>> root@zepto:/sys/class/misc/tpm0# cat device/owned
>>>> root@zepto:/sys/class/misc/tpm0# cat device/pubek
>>>> root@zepto:/sys/class/misc/tpm0# cat device/resources
>>>> state = active
>>>> mem 0xfed40000-0xfed44fff
>>>> io 0x4e-0x4f
>>>> io 0x1670-0x167f
>>>> irq 11
>>>> root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
>>>> root@zepto:/sys/class/misc/tpm0# cat device/timeouts
>>>> 752000 2000000 752000 752000 [adjusted]
>>>> root@zepto:/sys/class/misc/tpm0# cat device/uevent
>>>> DRIVER=tpm_tis
>>>>
>>>> To be able to do the 'cat' above, I usually need to restart my
>>>> computer, otherwise the files aren't there. That's probably after
>>>> I've put the computer in sleep mode (which works if I add tpm_tis
>>>> to
>>>> the module blacklist). Perhaps the same problem is related to this
>>>> one:
>>>> I just did a grep of my dmesg and saw some new error messages (28)
>>>> in it. Perhaps they started occurring after I enabled it in BIOS.
>>>>
>>>> root@zepto:/home/peter# dmesg | grep tpm_
>>>> [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
>>>> [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>>>> [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the timeouts
>
> So the above messages happen at the time you reinsert the module
> after a resume?
>
> Kent

Sadly I don't know. Reinserting the module after a resume doesn't
really seem to do much, for instance it doesn't recreate the directories
I listed/cat above.

But since one of the messages is after 4320 (seconds?) I guess it must
be something like that. But I didn't see them when I tried modprobing
the module several times, to get the directories in /sys/ back.

/Peter

>
>> But this only seems to happen after the tpm module has been unloaded
>> when
>> going to sleep. I don't get these messages after a reboot:
>> root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm
>> [ 12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>> [ 12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters.
>> [ 33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> [ 570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
>> /Peter
>>
>>
>>>
>>>> [ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the durations
>>>> [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and
>>>> durations
>>>> [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the timeouts
>>>> [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the durations
>>>> [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and
>>>> durations
>>>> [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the timeouts
>>>> [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the durations
>>>> [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and
>>>> durations
>>>> [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
>>>> [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the timeouts
>>>> [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting
>>>> to determine the durations
>>>> [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and
>>>> durations
>>>>
>>>> Thank you,
>>>> Peter A
>>>>
>>>>
>>>> >>Thanks,
>>>> >>Peter
>>>> >>
>>>> >>> If you're seeing similar values, can you try the attached
>>>> patch?
>>>> >>>
>>>> >>>Thanks,
>>>> >>>Kent
>>>> >>>
>>>> >>>>/Peter A
>>>> >>>>
>>>> >>>>
>>>> >>
>>>>
>>>>
>>>> >>>>
>>>> >>>>------------------------------------------------------------------------------
>>>> >>>>Own the Future-Intel&reg; Level Up Game Demo Contest 2013
>>>> >>>>Rise to greatness in Intel's independent game demo contest.
>>>> >>>>Compete for recognition, cash, and the chance to get your game
>>>> >>>>on Steam. $5K grand prize plus 10 genre and skill prizes.
>>>> >>>>Submit your demo by 6/6/13.
>>>> http://p.sf.net/sfu/intel_levelupd2d
>>>> >>>>_______________________________________________
>>>> >>>>tpmdd-devel mailing list
>>>> >>>>tpmdd-devel@lists.sourceforge.net
>>>> >>>>https://lists.sourceforge.net/lists/listinfo/tpmdd-devel


\
 
 \ /
  Last update: 2013-04-29 12:21    [W:0.062 / U:1.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site