lkml.org 
[lkml]   [2013]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] media: i2c: tvp7002: enable TVP7002 decoder for media controller based usage
Date
Hi Prabhakar,

On Monday 29 April 2013 23:00:26 Prabhakar Lad wrote:
> On Mon, Apr 29, 2013 at 7:57 PM, Laurent Pinchart wrote:
> > On Friday 26 April 2013 13:35:35 Prabhakar Lad wrote:
> >> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> >>
> >> This patch enables tvp7002 decoder driver for media controller
> >> based usage by adding v4l2_subdev_pad_ops operations support
> >> for enum_mbus_code, set_pad_format, get_pad_format and
> >> media_entity_init()
> >> on probe and media_entity_cleanup() on remove.
> >>
> >> The device supports 1 output pad and no input pads.
> >
> > We should actually define input pads, connected to connector entities, but
> > that's out of scope for this patch.
> >
> >> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> >> ---

[snip]

> >> +/*
> >> + * tvp7002_set_pad_format() - set video format on pad
> >> + * @sd: pointer to standard V4L2 sub-device structure
> >> + * @fh: file handle for the subdev
> >> + * @fmt: pointer to subdev format struct
> >> + *
> >> + * set video format for pad.
> >> +*/
> >> +static int
> >> +tvp7002_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh
> >> *fh,
> >> + struct v4l2_subdev_format *fmt)
> >> +{
> >> + struct tvp7002 *tvp7002 = to_tvp7002(sd);
> >> +
> >> + /* Check pad index is valid */
> >> + if (fmt->pad != 0)
> >> + return -EINVAL;
> >
> > Redundant check as well.
>
> OK
>
> >> + if (fmt->format.field != tvp7002->current_timings->scanmode ||
> >> + fmt->format.code != V4L2_MBUS_FMT_YUYV10_1X20 ||
> >> + fmt->format.colorspace != tvp7002->current_timings->color_space
> >> || + fmt->format.width !=
> >> tvp7002->current_timings->timings.bt.width || +
> >> fmt->format.height != tvp7002->current_timings->timings.bt.height) +
> >> return -EINVAL;
> >
> > You shouldn't return an error, but fix the input parameters according to
> > what the device supports. As the format is fixed for a giving set of
> > timings, the .set_pad_format() handler should just perform the same
> > operations as .get_pad_format(). You could even define
> > tvp7002_get_pad_format() only and use it as a handler for both
> > .get_pad_format() and .set_pad_format().
>
> OK. So its the job back in the application end to see what format was set.

That's right. The format ioctls work that way to negotiate formats with
userspace.

> >> + tvp7002->format = fmt->format;
> >> +
> >> + return 0;
> >> +}

[snip]

> >> +/* media pad related operation handlers */
> >> +static const struct v4l2_subdev_pad_ops tvp7002_pad_ops = {
> >> + .enum_mbus_code = tvp7002_enum_mbus_code,
> >> + .get_fmt = tvp7002_get_pad_format,
> >> + .set_fmt = tvp7002_set_pad_format,
> >
> > We will need to define pad-aware DV timings operations.
>
> I didn't get you this?

We will need to extend the pad operations (struct v4l2_subdev_pad_ops) with
operations to enumerate, get and set DV timings at the pad level.

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2013-04-29 20:01    [W:0.057 / U:2.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site