lkml.org 
[lkml]   [2013]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/4] ARM: dts: Add USB host support for Panda and Beagle-xm
On 04/19/2013 12:57 PM, Roger Quadros wrote:
> Hi Benoit/Tony
>
> I've consolidated all the USB host device tree patches for Panda and Beagles
> to one place and addressed Tony's comments.
>
> NOTE: patch 1 depends on OMAP clock binding introduced in
> https://lkml.org/lkml/2013/4/12/407

Tony, Benoit,

Just FYI, the patch [1] that is needed will probably not get in
until 3.10 rc1. However, this series need not wait till that happens.

[1] https://lkml.org/lkml/2013/4/12/407

cheers,
-roger

>
> v3:
> - updated mux mode to use pulldowns on panda as non-DT boot uses pulldowns.
> - fixed usb pin naming for panda, beagle and beagle-xm
>
> The following changes since commit 1fac4fffa719a98ec1047eaece236244333c9afe:
>
> ARM: dts: Add OMAP3430 SDP NOR flash memory binding (2013-04-09 00:21:35 +0200)
>
> are available in the git repository at:
> git://github.com/rogerq/linux.git usbhost-omap-dts
>
> Roger Quadros (4):
> ARM: dts: omap4-panda: Add USB Host support
> ARM: dts: omap3-beagle: Make USB host pin naming consistent
> ARM: dts: omap3-beagle-xm: Add USB Host support
> ARM: dts: omap3-beagle-xm: Add USB host supprot for Rev. Ax/Bx
>
> arch/arm/boot/dts/omap3-beagle-xm-ab.dts | 19 ++++++++
> arch/arm/boot/dts/omap3-beagle-xm.dts | 65 ++++++++++++++++++++++++++++-
> arch/arm/boot/dts/omap3-beagle.dts | 25 ++++++-----
> arch/arm/boot/dts/omap4-panda-common.dtsi | 58 +++++++++++++++++++++++++
> arch/arm/boot/dts/omap4.dtsi | 5 ++
> 5 files changed, 158 insertions(+), 14 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-beagle-xm-ab.dts
>



\
 
 \ /
  Last update: 2013-04-29 15:01    [W:0.219 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site