lkml.org 
[lkml]   [2013]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC V2 2/3] [smi2021] This is the smi2021 driver
Date

Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no>
---
drivers/media/usb/smi2021/smi2021.h | 278 +++++++++++++
drivers/media/usb/smi2021/smi2021_audio.c | 380 +++++++++++++++++
drivers/media/usb/smi2021/smi2021_bootloader.c | 261 ++++++++++++
drivers/media/usb/smi2021/smi2021_i2c.c | 137 +++++++
drivers/media/usb/smi2021/smi2021_main.c | 431 ++++++++++++++++++++
drivers/media/usb/smi2021/smi2021_v4l2.c | 542 ++++++++++++++++++++++++
drivers/media/usb/smi2021/smi2021_video.c | 544 +++++++++++++++++++++++++
7 files changed, 2573 insertions(+)
create mode 100644 drivers/media/usb/smi2021/smi2021.h
create mode 100644 drivers/media/usb/smi2021/smi2021_audio.c
create mode 100644 drivers/media/usb/smi2021/smi2021_bootloader.c
create mode 100644 drivers/media/usb/smi2021/smi2021_i2c.c
create mode 100644 drivers/media/usb/smi2021/smi2021_main.c
create mode 100644 drivers/media/usb/smi2021/smi2021_v4l2.c
create mode 100644 drivers/media/usb/smi2021/smi2021_video.c

diff --git a/drivers/media/usb/smi2021/smi2021.h b/drivers/media/usb/smi2021/smi2021.h
new file mode 100644
index 0000000..bf2235a
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021.h
@@ -0,0 +1,278 @@
+/*******************************************************************************
+ * smi2021.h *
+ * *
+ * USB Driver for SMI2021 - EasyCap *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#ifndef SMI2021_H
+#define SMI2021_H
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/types.h>
+#include <linux/spinlock_types.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/saa7115.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#define SMI2021_DRIVER_VERSION "0.1"
+
+/* For ISOC */
+#define SMI2021_MAX_PKT_SIZE 3072
+#define SMI2021_ISOC_PACKETS 10 /* 64 */
+#define SMI2021_ISOC_BUFS 4 /* 16 */
+#define SMI2021_ISOC_EP 0x82
+
+/* General USB control setup */
+#define SMI2021_USB_REQUEST 0x01
+#define SMI2021_USB_INDEX 0x00
+#define SMI2021_USB_PIPE_OUT 0x00
+#define SMI2021_USB_PIPE_IN 0x80
+
+/* Hardware constants */
+#define SMI2021_HW_STATE_HEAD 0x01
+#define SMI2021_HW_STATE_STANDBY 0x03
+#define SMI2021_HW_STATE_CAPTURE 0x05
+
+#define SMI2021_CTRL_HEAD 0x0b
+
+/* Flags passed to the device in control transfers */
+#define SMI2021_DATA_TYPE_FLAG_I2C 0x80
+#define SMI2021_DATA_TYPE_FLAG_WRITE 0x40
+#define SMI2021_DATA_TYPE_FLAG_READ 0x20
+#define SMI2021_DATA_TYPE_FLAG_PREPARE_READ 0x04
+
+#define SMI2021_DATA_OFFSET_FLAG_SMI 0x80
+#define SMI2021_DATA_OFFSET_SIZE_MASK 0x0f
+
+/* smi2021 ports */
+#define SMI2021_DDR_PORT 0x3a
+#define SMI2021_DATA_PORT 0x3b
+#define SMI2021_RESET_PIN 0x80
+#define SMI2021_AUDIO_PORT 0x1740
+#define SMI2021_AUDIO_ENABLE 0x1d
+
+/* General video constants */
+#define SMI2021_BYTES_PER_LINE 1440
+#define SMI2021_PAL_LINES 576
+#define SMI2021_NTSC_LINES 486
+
+/* Timing Referance Codes, see saa7113 datasheet */
+#define SMI2021_TRC_EAV 0x10
+#define SMI2021_TRC_VBI 0x20
+#define SMI2021_TRC_FIELD_2 0x40
+#define SMI2021_TRC 0x80
+
+#ifdef DEBUG
+#define smi2021_dbg(fmt, args...) \
+ pr_debug("smi2021::%s: " fmt, __func__, \
+ ##args)
+#else
+#define smi2021_dbg(fmt, args...)
+#endif
+
+#define smi2021_info(fmt, args...) \
+ pr_info("smi2021::%s: " fmt, \
+ __func__, ##args)
+
+#define smi2021_warn(fmt, args...) \
+ pr_warn("smi2021::%s: " fmt, \
+ __func__, ##args)
+
+#define smi2021_err(fmt, args...) \
+ pr_err("smi2021::%s: " fmt, \
+ __func__, ##args)
+
+enum smi2021_sync {
+ HSYNC,
+ SYNCZ1,
+ SYNCZ2,
+ TRC
+};
+
+enum smi2021_config {
+ SMI2021_DUAL_INPUT,
+ SMI2021_QUAD_INPUT
+};
+
+/* Structs passed on USB for device setup */
+
+struct smi2021_set_hw_state {
+ u8 head;
+ u8 state;
+} __packed;
+
+struct smi2021_ctrl {
+ u8 head;
+ u8 i2c_addr;
+ u8 bm_data_type;
+ u8 bm_data_offset;
+ u8 size;
+ union data {
+ u8 val;
+ struct i2c_data {
+ u8 reg;
+ u8 val;
+ } __packed i2c_data;
+ struct smi_data {
+ u8 reg_hi;
+ u8 reg_lo;
+ u8 val;
+ } __packed smi_data;
+ } __packed data;
+ u8 reserved[5];
+} __packed;
+
+/* Buffer for one video frame */
+struct smi2021_buffer {
+ /* Common vb2 stuff, must be first */
+ struct vb2_buffer vb;
+ struct list_head list;
+
+ void *mem;
+ unsigned int length;
+
+ bool second_field;
+ bool in_blank;
+ unsigned int pos;
+
+ /* ActiveVideo - Line counter */
+ u16 trc_av;
+};
+
+struct smi2021_isoc_ctl {
+ int max_pkt_size;
+ int num_bufs;
+ struct urb **urb;
+ char **transfer_buffer;
+ struct smi2021_buffer *buf;
+};
+
+
+struct smi2021_fmt {
+ char *name;
+ u32 fourcc;
+ int depth;
+};
+
+struct smi2021_input {
+ char *name;
+ int type;
+};
+
+struct smi2021_dev {
+ struct v4l2_device v4l2_dev;
+ struct video_device vdev;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ struct v4l2_subdev *sd_saa7113;
+
+ struct usb_device *udev;
+ struct device *dev;
+
+ /* Capture buffer queue */
+ struct vb2_queue vb_vidq;
+
+ /* ISOC control struct */
+ struct list_head avail_bufs;
+ struct smi2021_isoc_ctl isoc_ctl;
+
+ enum smi2021_config device_cfg;
+
+ int width; /* frame width */
+ int height; /* frame height */
+ unsigned int ctl_input; /* selected input */
+ v4l2_std_id norm; /* current norm */
+ const struct smi2021_fmt *fmt; /* selected format */
+ unsigned int buf_count; /* for video buffers */
+
+ /* i2c i/o */
+ struct i2c_adapter i2c_adap;
+ struct i2c_client i2c_client;
+
+ struct mutex v4l2_lock;
+ struct mutex vb_queue_lock;
+ spinlock_t buf_lock;
+
+ enum smi2021_sync sync_state;
+
+ /* audio */
+ struct snd_card *snd_card;
+ struct snd_pcm_substream *pcm_substream;
+
+ unsigned int pcm_write_ptr;
+ unsigned int pcm_complete_samples;
+
+ u8 pcm_read_offset;
+ struct work_struct adev_capture_trigger;
+ atomic_t adev_capturing;
+};
+
+/* Provided by smi2021_bootloader.c */
+int smi2021_bootloader_probe(struct usb_interface *intf,
+ const struct usb_device_id *devid);
+void smi2021_bootloader_disconnect(struct usb_interface *intf);
+
+/* Provided by smi2021_main.c */
+int smi2021_write_reg(struct smi2021_dev *dev, u8 addr, u16 reg, u8 val);
+int smi2021_read_reg(struct smi2021_dev *dev, u8 addr, u16 reg, u8 *val);
+int smi2021_set_hw_state(struct smi2021_dev *dev, u8 state);
+int smi2021_enable_audio(struct smi2021_dev *dev);
+
+/* Provided by smi2021_v4l2.c */
+int smi2021_vb2_setup(struct smi2021_dev *dev);
+int smi2021_video_register(struct smi2021_dev *dev);
+void smi2021_clear_queue(struct smi2021_dev *dev);
+
+/* Provided by smi2021_video.c */
+int smi2021_alloc_isoc(struct smi2021_dev *dev);
+void smi2021_free_isoc(struct smi2021_dev *dev);
+void smi2021_cancel_isoc(struct smi2021_dev *dev);
+void smi2021_uninit_isoc(struct smi2021_dev *dev);
+
+/* Provided by smi2021_i2c.c */
+int smi2021_i2c_register(struct smi2021_dev *dev);
+int smi2021_i2c_unregister(struct smi2021_dev *dev);
+
+/* Provided by smi2021_audio.c */
+int smi2021_snd_register(struct smi2021_dev *dev);
+void smi2021_snd_unregister(struct smi2021_dev *dev);
+void smi2021_audio(struct smi2021_dev *dev, u8 *data, int len);
+#endif /* SMI2021_H */
diff --git a/drivers/media/usb/smi2021/smi2021_audio.c b/drivers/media/usb/smi2021/smi2021_audio.c
new file mode 100644
index 0000000..9637153
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_audio.c
@@ -0,0 +1,380 @@
+/*******************************************************************************
+ * smi2021_audio.c *
+ * *
+ * USB Driver for SMI2021 - EasyCap *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+static void pcm_buffer_free(struct snd_pcm_substream *substream)
+{
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ substream->runtime->dma_bytes = 0;
+}
+
+static int pcm_buffer_alloc(struct snd_pcm_substream *substream, int size)
+{
+ if (substream->runtime->dma_area) {
+ if (substream->runtime->dma_bytes > size)
+ return 0;
+ pcm_buffer_free(substream);
+ }
+
+ substream->runtime->dma_area = vmalloc(size);
+ if (substream->runtime->dma_area == NULL)
+ return -ENOMEM;
+
+ substream->runtime->dma_bytes = size;
+
+ return 0;
+}
+
+static const struct snd_pcm_hardware smi2021_pcm_hw = {
+ .info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
+
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .period_bytes_min = 992, /* 32640 */ /* 15296 */
+ .period_bytes_max = 15872, /* 65280 */
+ .periods_min = 1, /* 1 */
+ .periods_max = 16, /* 2 */
+ .buffer_bytes_max = 65280, /* 65280 */
+};
+
+static int smi2021_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ int rc;
+
+ rc = snd_pcm_hw_constraint_pow2(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (rc < 0)
+ return rc;
+
+ dev->pcm_substream = substream;
+
+ runtime->hw = smi2021_pcm_hw;
+ snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+
+ smi2021_dbg("PCM device open!\n");
+
+ return 0;
+}
+
+static int smi2021_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+ smi2021_dbg("PCM device closing\n");
+
+ if (atomic_read(&dev->adev_capturing)) {
+ atomic_set(&dev->adev_capturing, 0);
+ schedule_work(&dev->adev_capture_trigger);
+ }
+ return 0;
+
+}
+
+
+static int smi2021_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ int size, rc;
+ size = params_period_bytes(hw_params) * params_periods(hw_params);
+
+ rc = pcm_buffer_alloc(substream, size);
+ if (rc < 0)
+ return rc;
+
+
+ return 0;
+}
+
+static int smi2021_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+
+ if (atomic_read(&dev->adev_capturing)) {
+ atomic_set(&dev->adev_capturing, 0);
+ schedule_work(&dev->adev_capture_trigger);
+ }
+
+ pcm_buffer_free(substream);
+ return 0;
+}
+
+static int smi2021_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+
+ dev->pcm_complete_samples = 0;
+ dev->pcm_read_offset = 0;
+ dev->pcm_write_ptr = 0;
+
+ return 0;
+}
+
+static void capture_trigger(struct work_struct *work)
+{
+ struct smi2021_dev *dev = container_of(work, struct smi2021_dev,
+ adev_capture_trigger);
+
+ if (atomic_read(&dev->adev_capturing))
+ smi2021_write_reg(dev, 0, 0x1740, 0x1d);
+ else
+ smi2021_write_reg(dev, 0, 0x1740, 0x00);
+}
+
+/* This callback is ATOMIC, must not sleep */
+static int smi2021_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_START:
+ atomic_set(&dev->adev_capturing, 1);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ atomic_set(&dev->adev_capturing, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ schedule_work(&dev->adev_capture_trigger);
+
+ return 0;
+}
+
+static snd_pcm_uframes_t smi2021_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct smi2021_dev *dev = snd_pcm_substream_chip(substream);
+ return dev->pcm_write_ptr / 8;
+}
+
+static struct page *smi2021_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
+ unsigned long offset)
+{
+ void *pageptr = subs->runtime->dma_area + offset;
+
+ return vmalloc_to_page(pageptr);
+}
+
+static struct snd_pcm_ops smi2021_pcm_ops = {
+ .open = smi2021_pcm_open,
+ .close = smi2021_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = smi2021_pcm_hw_params,
+ .hw_free = smi2021_pcm_hw_free,
+ .prepare = smi2021_pcm_prepare,
+ .trigger = smi2021_pcm_trigger,
+ .pointer = smi2021_pcm_pointer,
+ .page = smi2021_pcm_get_vmalloc_page,
+};
+
+int smi2021_snd_register(struct smi2021_dev *dev)
+{
+ struct snd_card *card;
+ struct snd_pcm *pcm;
+ int rc = 0;
+
+ rc = snd_card_create(SNDRV_DEFAULT_IDX1, "smi2021 Audio", THIS_MODULE,
+ 0, &card);
+ if (rc < 0)
+ return rc;
+
+ rc = snd_pcm_new(card, "smi2021 Audio", 0, 0, 1, &pcm);
+ if (rc < 0)
+ goto err_free_card;
+
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &smi2021_pcm_ops);
+ pcm->info_flags = 0;
+ pcm->private_data = dev;
+ strcpy(pcm->name, "Somagic smi2021 Capture");
+
+ strcpy(card->driver, "smi2021-Audio");
+ strcpy(card->shortname, "smi2021 Audio");
+ strcpy(card->longname, "Somagic smi2021 Audio");
+
+ INIT_WORK(&dev->adev_capture_trigger, capture_trigger);
+
+ rc = snd_card_register(card);
+ if (rc < 0)
+ goto err_free_card;
+
+ dev->snd_card = card;
+
+ return 0;
+
+err_free_card:
+ snd_card_free(card);
+ return rc;
+}
+
+void smi2021_snd_unregister(struct smi2021_dev *dev)
+{
+ if (!dev)
+ return;
+
+ if (!dev->snd_card)
+ return;
+
+ snd_card_free(dev->snd_card);
+ dev->snd_card = NULL;
+}
+
+void smi2021_audio(struct smi2021_dev *dev, u8 *data, int len)
+{
+ struct snd_pcm_runtime *runtime;
+ u8 offset;
+ int new_offset = 0;
+
+ int skip;
+ unsigned int stride, oldptr, headptr;
+
+ int diff = 0;
+ int samples = 0;
+ bool period_elapsed = false;
+
+
+ if (!dev->udev)
+ return;
+
+ if (atomic_read(&dev->adev_capturing) == 0)
+ return;
+
+ if (!dev->pcm_substream)
+ return;
+
+ runtime = dev->pcm_substream->runtime;
+ if (!runtime || !runtime->dma_area)
+ return;
+
+ offset = dev->pcm_read_offset;
+ stride = runtime->frame_bits >> 3;
+
+ if (stride == 0)
+ return;
+
+ diff = dev->pcm_write_ptr;
+
+ /* Check that the end of the last buffer was correct.
+ * If not correct, we mark any partial frames in buffer as complete
+ */
+ headptr = dev->pcm_write_ptr - offset - 4;
+ if (dev->pcm_write_ptr > 10 && runtime->dma_area[headptr] != 0x00) {
+ skip = stride - (dev->pcm_write_ptr % stride);
+ snd_pcm_stream_lock(dev->pcm_substream);
+ dev->pcm_write_ptr += skip;
+
+ if (dev->pcm_write_ptr >= runtime->dma_bytes)
+ dev->pcm_write_ptr -= runtime->dma_bytes;
+
+ snd_pcm_stream_unlock(dev->pcm_substream);
+ offset = dev->pcm_read_offset = 0;
+ }
+ /* The device is actually sending 24Bit pcm data
+ * with 0x00 as the header byte before each sample.
+ * We look for this byte to make sure we did not
+ * loose any bytes during transfer.
+ */
+ while (len > stride && (data[offset] != 0x00 ||
+ data[offset + (stride / 2)] != 0x00)) {
+ new_offset++;
+ data++;
+ len--;
+ }
+
+ if (len <= stride) {
+ /* We exhausted the buffer looking for 0x00 */
+ dev->pcm_read_offset = 0;
+ return;
+ }
+ if (new_offset != 0) {
+ /* This buffer can not be appended to the current buffer,
+ * so we mark any partial frames in the buffer as complete.
+ */
+ skip = stride - (dev->pcm_write_ptr % stride);
+ snd_pcm_stream_lock(dev->pcm_substream);
+ dev->pcm_write_ptr += skip;
+
+ if (dev->pcm_write_ptr >= runtime->dma_bytes)
+ dev->pcm_write_ptr -= runtime->dma_bytes;
+
+ snd_pcm_stream_unlock(dev->pcm_substream);
+
+ offset = dev->pcm_read_offset = new_offset % (stride / 2);
+
+ }
+
+ oldptr = dev->pcm_write_ptr;
+ if (oldptr + len >= runtime->dma_bytes) {
+ unsigned int cnt = runtime->dma_bytes - oldptr;
+ memcpy(runtime->dma_area + oldptr, data, cnt);
+ memcpy(runtime->dma_area, data + cnt, len - cnt);
+ } else {
+ memcpy(runtime->dma_area + oldptr, data, len);
+ }
+
+ snd_pcm_stream_lock(dev->pcm_substream);
+ dev->pcm_write_ptr += len;
+
+ if (dev->pcm_write_ptr >= runtime->dma_bytes)
+ dev->pcm_write_ptr -= runtime->dma_bytes;
+
+ samples = dev->pcm_write_ptr - diff;
+ if (samples < 0)
+ samples += runtime->dma_bytes;
+
+ samples /= (stride / 2);
+
+ dev->pcm_complete_samples += samples;
+ if (dev->pcm_complete_samples / 2 >= runtime->period_size) {
+ dev->pcm_complete_samples -= runtime->period_size * 2;
+ period_elapsed = true;
+ }
+ snd_pcm_stream_unlock(dev->pcm_substream);
+
+ if (period_elapsed)
+ snd_pcm_period_elapsed(dev->pcm_substream);
+
+}
diff --git a/drivers/media/usb/smi2021/smi2021_bootloader.c b/drivers/media/usb/smi2021/smi2021_bootloader.c
new file mode 100644
index 0000000..ac95acf
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_bootloader.c
@@ -0,0 +1,261 @@
+/*******************************************************************************
+ * smi2021_bootloader.c *
+ * *
+ * USB Driver for SMI2021 - EasyCAP *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+
+#define FIRMWARE_CHUNK_SIZE 62
+#define FIRMWARE_HEADER_SIZE 2
+
+#define FIRMWARE_CHUNK_HEAD_0 0x05
+#define FIRMWARE_CHUNK_HEAD_1 0xff
+#define FIRMWARE_HW_READY_STATE 0x07
+
+#define SMI2021_3C_FIRMWARE "smi2021_3c.bin"
+#define SMI2021_3E_FIRMWARE "smi2021_3e.bin"
+#define SMI2021_3F_FIRMWARE "smi2021_3f.bin"
+
+static unsigned int firmware_version;
+module_param(firmware_version, int, 0644);
+MODULE_PARM_DESC(firmware_version,
+ "Firmware version to be uploaded to device\n"
+ "if there are more than one firmware present");
+
+struct smi2021_firmware {
+ int id;
+ const char *name;
+ int found;
+};
+
+struct smi2021_firmware available_fw[] = {
+ {
+ .id = 0x3c,
+ .name = SMI2021_3C_FIRMWARE,
+ },
+ {
+ .id = 0x3e,
+ .name = SMI2021_3E_FIRMWARE,
+ },
+ {
+ .id = 0x3f,
+ .name = SMI2021_3F_FIRMWARE,
+ }
+};
+
+static const struct firmware *firmware[ARRAY_SIZE(available_fw)];
+static int firmwares = -1;
+
+static int smi2021_load_firmware(struct usb_device *udev,
+ const struct firmware *firmware)
+{
+ int i, size, rc;
+ struct smi2021_set_hw_state *hw_state;
+ u8 *chunk;
+
+ size = FIRMWARE_CHUNK_SIZE + FIRMWARE_HEADER_SIZE;
+ chunk = kzalloc(size, GFP_KERNEL);
+
+ if (chunk == NULL) {
+ dev_err(&udev->dev,
+ "could not allocate space for firmware chunk\n");
+ rc = -ENOMEM;
+ goto end_out;
+ }
+
+ hw_state = kzalloc(sizeof(*hw_state), GFP_KERNEL);
+ if (hw_state == NULL) {
+ dev_err(&udev->dev, "could not allocate space for usb data\n");
+ rc = -ENOMEM;
+ goto free_out;
+ }
+
+ if (firmware == NULL) {
+ dev_err(&udev->dev, "firmware is NULL\n");
+ rc = -ENODEV;
+ goto free_out;
+ }
+
+ if (firmware->size % FIRMWARE_CHUNK_SIZE) {
+ dev_err(&udev->dev, "firmware has wrong size\n");
+ rc = -ENODEV;
+ goto free_out;
+ }
+
+ rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, SMI2021_USB_PIPE_IN),
+ SMI2021_USB_REQUEST,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ SMI2021_HW_STATE_HEAD, SMI2021_USB_INDEX,
+ hw_state, sizeof(*hw_state), 1000);
+
+ if (rc < 0) {
+ dev_err(&udev->dev,
+ "could not check if device is ready for firmware upload: %d\n",
+ rc);
+ goto free_out;
+ }
+ if (hw_state->state != FIRMWARE_HW_READY_STATE) {
+ dev_err(&udev->dev,
+ "device is not ready for firmware upload: %d\n", rc);
+ goto free_out;
+ }
+
+ chunk[0] = FIRMWARE_CHUNK_HEAD_0;
+ chunk[1] = FIRMWARE_CHUNK_HEAD_1;
+
+ for (i = 0; i < firmware->size / FIRMWARE_CHUNK_SIZE; i++) {
+ memcpy(chunk + FIRMWARE_HEADER_SIZE,
+ firmware->data + (i * FIRMWARE_CHUNK_SIZE),
+ FIRMWARE_CHUNK_SIZE);
+
+ rc = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, SMI2021_USB_PIPE_OUT),
+ SMI2021_USB_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ FIRMWARE_CHUNK_HEAD_0, SMI2021_USB_INDEX,
+ chunk, size, 1000);
+ if (rc < 0) {
+ dev_err(&udev->dev, "firmware upload failed: %d\n",
+ rc);
+ goto free_out;
+ }
+ }
+
+ hw_state->head = FIRMWARE_HW_READY_STATE;
+ hw_state->state = 0x00;
+ rc = usb_control_msg(udev, usb_sndctrlpipe(udev, SMI2021_USB_PIPE_OUT),
+ SMI2021_USB_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ FIRMWARE_HW_READY_STATE, SMI2021_USB_INDEX,
+ hw_state, sizeof(*hw_state), 1000);
+
+ if (rc < 0) {
+ dev_err(&udev->dev, "device failed to ack firmware: %d\n", rc);
+ goto free_out;
+ }
+
+ rc = 0;
+
+free_out:
+ kfree(chunk);
+ kfree(hw_state);
+end_out:
+ return rc;
+}
+
+static int smi2021_choose_firmware(struct usb_device *udev)
+{
+ int i, found, id;
+ for (i = 0; i < ARRAY_SIZE(available_fw); i++) {
+ found = available_fw[i].found;
+ id = available_fw[i].id;
+ if (firmware_version == id && found >= 0) {
+ dev_info(&udev->dev, "uploading firmware for 0x%x\n",
+ id);
+ return smi2021_load_firmware(udev, firmware[found]);
+ }
+ }
+
+ dev_info(&udev->dev,
+ "could not decide what firmware to upload, user action required\n");
+ return 0;
+}
+
+int smi2021_bootloader_probe(struct usb_interface *intf,
+ const struct usb_device_id *devid)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int rc, i;
+
+ /* Check what firmwares are available in the system */
+ for (i = 0; i < ARRAY_SIZE(available_fw); i++) {
+ dev_info(&udev->dev, "Looking for: %s\n", available_fw[i].name);
+ rc = request_firmware(&firmware[firmwares + 1],
+ available_fw[i].name, &udev->dev);
+
+ if (rc == 0) {
+ firmwares++;
+ available_fw[i].found = firmwares;
+ dev_info(&udev->dev, "Found firmware for 0x00%x\n",
+ available_fw[i].id);
+ } else if (rc == -ENOENT) {
+ available_fw[i].found = -1;
+ } else {
+ dev_err(&udev->dev,
+ "request_firmware failed with: %d\n", rc);
+ goto err_out;
+ }
+ }
+
+ if (firmwares < 0) {
+ dev_err(&udev->dev,
+ "could not find any firmware for this device\n");
+ goto no_dev;
+ } else if (firmwares == 0) {
+ rc = smi2021_load_firmware(udev, firmware[0]);
+ if (rc < 0)
+ goto err_out;
+ } else {
+ smi2021_choose_firmware(udev);
+ }
+
+ return 0;
+
+no_dev:
+ rc = -ENODEV;
+err_out:
+ return rc;
+}
+
+void smi2021_bootloader_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(available_fw); i++) {
+ if (available_fw[i].found >= 0) {
+ dev_info(&udev->dev, "Releasing firmware for 0x00%x\n",
+ available_fw[i].id);
+ release_firmware(firmware[available_fw[i].found]);
+ firmware[available_fw[i].found] = NULL;
+ available_fw[i].found = -1;
+ }
+ }
+ firmwares = -1;
+
+}
+
+MODULE_FIRMWARE(SMI2021_3C_FIRMWARE);
+MODULE_FIRMWARE(SMI2021_3E_FIRMWARE);
+MODULE_FIRMWARE(SMI2021_3F_FIRMWARE);
+
diff --git a/drivers/media/usb/smi2021/smi2021_i2c.c b/drivers/media/usb/smi2021/smi2021_i2c.c
new file mode 100644
index 0000000..5d25eae
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_i2c.c
@@ -0,0 +1,137 @@
+/*******************************************************************************
+ * smi2021_i2c.c *
+ * *
+ * USB Driver for SMI2021 - EasyCAP *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define dprint_i2c(fmt, args...) \
+do { \
+ if (i2c_debug) \
+ pr_debug("smi2021[i2c]::%s: " fmt, __func__, ##args); \
+} while (0)
+
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct smi2021_dev *dev = i2c_adap->algo_data;
+
+ switch (num) {
+ case 2: /* Read reg */
+ if (msgs[0].len != 1 || msgs[1].len != 1) {
+ dprint_i2c("both messages must be 1 byte\n");
+ goto err_out;
+ }
+
+ if ((msgs[1].flags & I2C_M_RD) != I2C_M_RD) {
+ dprint_i2c("last message should have rd flag\n");
+ goto err_out;
+ }
+ smi2021_read_reg(dev, msgs[0].addr, msgs[0].buf[0],
+ msgs[1].buf);
+ break;
+ case 1: /* Write reg */
+ if (msgs[0].len == 0) {
+ break;
+ } else if (msgs[0].len != 2) {
+ dprint_i2c("unsupported len\n");
+ goto err_out;
+ }
+ if (msgs[0].buf[0] == 0) {
+ /* We don't handle writing to addr 0x00 */
+ break;
+ }
+ dprint_i2c("Set reg 0x%x to 0x%x\n",
+ msgs[0].buf[0], msgs[0].buf[1]);
+ smi2021_write_reg(dev, msgs[0].addr, msgs[0].buf[0],
+ msgs[0].buf[1]);
+ break;
+ default:
+ dprint_i2c("driver can only handle 1 or 2 messages\n");
+ goto err_out;
+ }
+ return num;
+
+err_out:
+ return -EOPNOTSUPP;
+}
+
+static u32 functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm algo = {
+ .master_xfer = i2c_xfer,
+ .functionality = functionality,
+};
+
+static struct i2c_adapter adap_template = {
+ .owner = THIS_MODULE,
+ .name = "smi2021_easycap_dc60",
+ .algo = &algo,
+};
+
+static struct i2c_client client_template = {
+ .name = "smi2021 internal",
+};
+
+int smi2021_i2c_register(struct smi2021_dev *dev)
+{
+ int rc;
+
+ dev->i2c_adap = adap_template;
+ dev->i2c_adap.dev.parent = dev->dev;
+ strcpy(dev->i2c_adap.name, "smi2021");
+ dev->i2c_adap.algo_data = dev;
+
+ i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+
+ rc = i2c_add_adapter(&dev->i2c_adap);
+ if (rc < 0) {
+ smi2021_err("can't add i2c adapter, errno: %d\n", rc);
+ return rc;
+ }
+
+ dev->i2c_client = client_template;
+ dev->i2c_client.adapter = &dev->i2c_adap;
+
+ smi2021_dbg("Registered i2c adapter\n");
+ return 0;
+}
+
+int smi2021_i2c_unregister(struct smi2021_dev *dev)
+{
+ i2c_del_adapter(&dev->i2c_adap);
+ return 0;
+}
diff --git a/drivers/media/usb/smi2021/smi2021_main.c b/drivers/media/usb/smi2021/smi2021_main.c
new file mode 100644
index 0000000..7c5315f
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_main.c
@@ -0,0 +1,431 @@
+/*******************************************************************************
+ * smi2021_main.c *
+ * *
+ * USB Driver for SMI2021 - EasyCAP *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+#define VENDOR_ID 0x1c88
+#define BOOTLOADER_ID 0x0007
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jon Arne Jørgensen <jonjon.arnearne--a.t--gmail.com>");
+MODULE_DESCRIPTION("SMI2021 - EasyCap");
+MODULE_VERSION(SMI2021_DRIVER_VERSION);
+
+static const struct usb_device_id smi2021_usb_device_id_table[] = {
+ { USB_DEVICE(VENDOR_ID, BOOTLOADER_ID) },
+ { USB_DEVICE(VENDOR_ID, 0x003c) },
+ { USB_DEVICE(VENDOR_ID, 0x003d) },
+ { USB_DEVICE(VENDOR_ID, 0x003e) },
+ { USB_DEVICE(VENDOR_ID, 0x003f) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, smi2021_usb_device_id_table);
+
+/******************************************************************************/
+/* */
+/* Write to saa7113 */
+/* */
+/******************************************************************************/
+
+inline int transfer_usb_ctrl(struct smi2021_dev *dev,
+ struct smi2021_ctrl *data, int len)
+{
+ return usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, SMI2021_USB_PIPE_OUT),
+ SMI2021_USB_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ SMI2021_CTRL_HEAD, SMI2021_USB_INDEX,
+ data, len, 1000);
+}
+
+int smi2021_write_reg(struct smi2021_dev *dev, u8 addr, u16 reg, u8 val)
+{
+ int rc;
+ struct smi2021_ctrl *data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (dev->udev == NULL) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ data->head = SMI2021_CTRL_HEAD;
+ data->i2c_addr = addr;
+ data->size = sizeof(val);
+
+ if (addr) {
+ /* This is I2C data for the saa7113 chip */
+ data->bm_data_type = SMI2021_DATA_TYPE_FLAG_I2C |
+ SMI2021_DATA_TYPE_FLAG_WRITE;
+ data->bm_data_offset =
+ sizeof(u8) & SMI2021_DATA_OFFSET_SIZE_MASK;
+
+ data->data.i2c_data.reg = reg;
+ data->data.i2c_data.val = val;
+ } else {
+ /* This is register settings for the smi2021 chip */
+ data->bm_data_offset = SMI2021_DATA_OFFSET_FLAG_SMI |
+ (sizeof(reg) & SMI2021_DATA_OFFSET_SIZE_MASK);
+
+ data->data.smi_data.reg_lo = __cpu_to_le16(reg) & 0xff;
+ data->data.smi_data.reg_hi = __cpu_to_le16(reg) >> 8;
+ data->data.smi_data.val = val;
+ }
+
+ rc = transfer_usb_ctrl(dev, data, sizeof(*data));
+ if (rc < 0) {
+ smi2021_warn("write failed on register 0x%x, errno: %d\n",
+ reg, rc);
+ }
+
+out:
+ kfree(data);
+ return rc;
+
+}
+
+int smi2021_read_reg(struct smi2021_dev *dev, u8 addr, u16 reg, u8 *val)
+{
+ int rc;
+ struct smi2021_ctrl *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+ if (data == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (dev->udev == NULL) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ data->head = SMI2021_CTRL_HEAD;
+ data->i2c_addr = addr;
+ data->bm_data_type = SMI2021_DATA_TYPE_FLAG_I2C |
+ SMI2021_DATA_TYPE_FLAG_PREPARE_READ;
+ data->size = sizeof(*val);
+ data->data.i2c_data.reg = reg;
+
+ *val = 0;
+
+ rc = transfer_usb_ctrl(dev, data, sizeof(*data));
+ if (rc < 0) {
+ smi2021_warn(
+ "1st pass failing to read reg 0x%x, usb-errno: %d\n",
+ reg, rc);
+ goto out;
+ }
+
+ data->bm_data_type = SMI2021_DATA_TYPE_FLAG_I2C |
+ SMI2021_DATA_TYPE_FLAG_READ;
+
+ rc = transfer_usb_ctrl(dev, data, sizeof(*data));
+ if (rc < 0) {
+ smi2021_warn(
+ "2nd pass failing to read reg 0x%x, usb-errno: %d\n",
+ reg, rc);
+ goto out;
+ }
+
+ memset(data, 0, sizeof(*data));
+ rc = usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, SMI2021_USB_PIPE_IN),
+ SMI2021_USB_REQUEST,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ SMI2021_CTRL_HEAD, SMI2021_USB_INDEX,
+ data, sizeof(*data), 1000);
+ if (rc < 0) {
+ smi2021_warn("Failed to read reg 0x%x, usb-errno: %d\n",
+ reg, rc);
+ goto out;
+ }
+
+ *val = data->data.val;
+
+out:
+ kfree(data);
+ return rc;
+}
+
+static void smi2021_reset_device(struct smi2021_dev *dev)
+{
+ /* Set reset pin to output */
+ smi2021_write_reg(dev, 0, SMI2021_DDR_PORT, SMI2021_RESET_PIN);
+
+ /* Toggle pin */
+ smi2021_write_reg(dev, 0, SMI2021_DATA_PORT, SMI2021_RESET_PIN);
+ smi2021_write_reg(dev, 0, SMI2021_DATA_PORT, 0x00);
+}
+
+
+int smi2021_set_hw_state(struct smi2021_dev *dev, u8 state)
+{
+ int rc;
+ struct smi2021_set_hw_state *hw_state;
+
+ if (dev->udev == NULL)
+ return -ENODEV;
+
+ hw_state = kzalloc(sizeof(*hw_state), GFP_KERNEL);
+ if (hw_state == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (state == SMI2021_HW_STATE_STANDBY)
+ usb_set_interface(dev->udev, 0, 0);
+
+ hw_state->head = SMI2021_HW_STATE_HEAD;
+ hw_state->state = state;
+
+ rc = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, SMI2021_USB_PIPE_OUT),
+ SMI2021_USB_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ SMI2021_HW_STATE_HEAD, SMI2021_USB_INDEX,
+ hw_state, sizeof(*hw_state), 1000);
+
+ if (rc < 0) {
+ smi2021_err("usb_control_msg returned: %d\n", rc);
+ goto out;
+ }
+
+ smi2021_dbg("Sent %lu bytes setup packet: 0x%x 0x%x\n",
+ sizeof(*hw_state), *(u8 *)hw_state,
+ *(((u8 *)hw_state)+1));
+
+ if (state == SMI2021_HW_STATE_CAPTURE) {
+ rc = usb_set_interface(dev->udev, 0, 2);
+ smi2021_dbg("%d: Interface set for capture\n", rc);
+ }
+
+
+
+out:
+ kfree(hw_state);
+ return rc;
+}
+
+static void release_v4l2_dev(struct v4l2_device *v4l2_dev)
+{
+ struct smi2021_dev *dev = container_of(v4l2_dev, struct smi2021_dev,
+ v4l2_dev);
+ smi2021_dbg("Releasing all resources\n");
+
+ smi2021_i2c_unregister(dev);
+
+ v4l2_ctrl_handler_free(&dev->ctrl_handler);
+ v4l2_device_unregister(&dev->v4l2_dev);
+ kfree(dev);
+}
+
+#define hb_mult(w_max_packet_size) (1 + (((w_max_packet_size) >> 11) & 0x03))
+
+static int smi2021_scan_usb(struct usb_interface *intf, struct usb_device *udev)
+{
+ int i, e, ifnum, sizedescr, size;
+ const struct usb_endpoint_descriptor *desc;
+ ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+
+ for (i = 0; i < intf->num_altsetting; i++) {
+ for (e = 0; e < intf->altsetting[i].desc.bNumEndpoints; e++) {
+ desc = &intf->altsetting[i].endpoint[e].desc;
+ sizedescr = le16_to_cpu(desc->wMaxPacketSize);
+ size = sizedescr & 0x7ff;
+
+ if (udev->speed == USB_SPEED_HIGH)
+ size = size * hb_mult(sizedescr);
+ }
+ }
+ return 0;
+}
+
+/******************************************************************************/
+/* */
+/* DEVICE - PROBE & DISCONNECT */
+/* */
+/******************************************************************************/
+static int smi2021_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *devid)
+{
+ int rc;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct smi2021_dev *dev;
+
+ if (udev == (struct usb_device *)NULL) {
+ smi2021_err("device is NULL\n");
+ return -EFAULT;
+ }
+
+ if (udev->descriptor.idProduct == BOOTLOADER_ID)
+ return smi2021_bootloader_probe(intf, devid);
+
+ smi2021_scan_usb(intf, udev);
+
+ dev = kzalloc(sizeof(struct smi2021_dev), GFP_KERNEL);
+ if (dev == NULL)
+ return -ENOMEM;
+
+ dev->udev = udev;
+ dev->dev = &intf->dev;
+ usb_set_intfdata(intf, dev);
+
+ switch (udev->descriptor.idProduct) {
+ case 0x003e:
+ case 0x003f:
+ dev->device_cfg = SMI2021_QUAD_INPUT;
+ break;
+ case 0x003c:
+ case 0x003d:
+ default:
+ dev->device_cfg = SMI2021_DUAL_INPUT;
+ }
+
+ /* Initialize videobuf2 stuff */
+ rc = smi2021_vb2_setup(dev);
+ if (rc < 0)
+ goto free_err;
+
+ spin_lock_init(&dev->buf_lock);
+ mutex_init(&dev->v4l2_lock);
+ mutex_init(&dev->vb_queue_lock);
+
+ rc = v4l2_ctrl_handler_init(&dev->ctrl_handler, 0);
+ if (rc) {
+ smi2021_err("v4l2_ctrl_handler_init failed with: %d\n", rc);
+ goto free_err;
+ }
+
+ dev->v4l2_dev.release = release_v4l2_dev;
+ dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler;
+ rc = v4l2_device_register(dev->dev, &dev->v4l2_dev);
+ if (rc) {
+ smi2021_err("v4l2_device_register failed with %d\n", rc);
+ goto free_ctrl;
+ }
+
+ smi2021_reset_device(dev);
+
+ rc = smi2021_i2c_register(dev);
+ if (rc < 0)
+ goto unreg_v4l2;
+
+ dev->sd_saa7113 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "gm7113c", 0x4a, NULL);
+
+ smi2021_dbg("Driver version %s successfully loaded\n",
+ SMI2021_DRIVER_VERSION);
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+
+ rc = smi2021_snd_register(dev);
+ if (rc < 0)
+ goto unreg_i2c;
+
+ rc = smi2021_video_register(dev);
+ if (rc < 0)
+ goto unreg_snd;
+
+ return 0;
+
+unreg_snd:
+ smi2021_snd_unregister(dev);
+unreg_i2c:
+ smi2021_i2c_unregister(dev);
+unreg_v4l2:
+ v4l2_device_unregister(&dev->v4l2_dev);
+free_ctrl:
+ v4l2_ctrl_handler_free(&dev->ctrl_handler);
+free_err:
+ kfree(dev);
+
+ return rc;
+}
+
+static void smi2021_usb_disconnect(struct usb_interface *intf)
+{
+
+ struct smi2021_dev *dev;
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ if (udev == (struct usb_device *)NULL) {
+ smi2021_err("device is NULL\n");
+ return;
+ }
+
+ if (udev->descriptor.idProduct == BOOTLOADER_ID)
+ return smi2021_bootloader_disconnect(intf);
+
+ dev = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+
+ mutex_lock(&dev->vb_queue_lock);
+ mutex_lock(&dev->v4l2_lock);
+
+ smi2021_uninit_isoc(dev);
+ smi2021_clear_queue(dev);
+
+ video_unregister_device(&dev->vdev);
+ v4l2_device_disconnect(&dev->v4l2_dev);
+
+ /* This way current users can detect device is gone */
+ dev->udev = NULL;
+
+ mutex_unlock(&dev->v4l2_lock);
+ mutex_unlock(&dev->vb_queue_lock);
+
+ smi2021_snd_unregister(dev);
+
+ /*
+ * This calls release_v4l2_dev if it's the last reference.
+ * Otherwise, the release is postponed until there are no users left.
+ */
+ v4l2_device_put(&dev->v4l2_dev);
+}
+
+/******************************************************************************/
+/* */
+/* MODULE - INIT & EXIT */
+/* */
+/******************************************************************************/
+
+struct usb_driver smi2021_usb_driver = {
+ .name = "smi2021",
+ .id_table = smi2021_usb_device_id_table,
+ .probe = smi2021_usb_probe,
+ .disconnect = smi2021_usb_disconnect
+};
+
+module_usb_driver(smi2021_usb_driver);
diff --git a/drivers/media/usb/smi2021/smi2021_v4l2.c b/drivers/media/usb/smi2021/smi2021_v4l2.c
new file mode 100644
index 0000000..90a838b
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_v4l2.c
@@ -0,0 +1,542 @@
+/*******************************************************************************
+ * smi2021_v4l2.c *
+ * *
+ * USB Driver for smi2021 - EasyCap *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+static const struct smi2021_fmt format[] = {
+ {
+ .name = "16bpp YU2, 4:2:2, packed",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ }
+};
+
+static const struct smi2021_input dual_input[] = {
+ {
+ .name = "Composite",
+ .type = SAA7115_COMPOSITE0,
+ },
+ {
+ .name = "S-Video",
+ .type = SAA7115_SVIDEO1,
+ }
+};
+
+static const struct smi2021_input quad_input[] = {
+ {
+ .name = "Composite 0",
+ .type = SAA7115_COMPOSITE0,
+ },
+ {
+ .name = "Composite 1",
+ .type = SAA7115_COMPOSITE1,
+ },
+ {
+ .name = "Composite 2",
+ .type = SAA7115_COMPOSITE2,
+ },
+ {
+ .name = "Composite 3",
+ .type = SAA7115_COMPOSITE3,
+ },
+};
+
+static const struct smi2021_input *input = dual_input;
+static int inputs = ARRAY_SIZE(dual_input);
+
+static void smi2021_set_input(struct smi2021_dev *dev)
+{
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
+ input[dev->ctl_input].type, 0, 0);
+}
+
+/* Must be called with v4l2_lock hold */
+static void smi2021_stop_hw(struct smi2021_dev *dev)
+{
+ int rc;
+
+ rc = smi2021_set_hw_state(dev, SMI2021_HW_STATE_STANDBY);
+ if (rc < 0)
+ smi2021_err("Could not stop device!\n");
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+}
+
+static struct v4l2_file_operations smi2021_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+/******************************************************************************/
+/* */
+/* Vidioc IOCTLS */
+/* */
+/******************************************************************************/
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index != 0)
+ return -EINVAL;
+
+ strlcpy(f->description, format[f->index].name, sizeof(f->description));
+ f->pixelformat = format[f->index].fourcc;
+
+ return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ strcpy(cap->driver, "smi2021");
+ strcpy(cap->card, "smi2021");
+ usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
+ cap->device_caps =
+ V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = dev->fmt->fourcc;
+ f->fmt.pix.width = dev->width;
+ f->fmt.pix.height = dev->height;
+ f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ f->fmt.pix.bytesperline = dev->width * 2;
+ f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ f->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ f->fmt.pix.pixelformat = dev->fmt->fourcc;
+ f->fmt.pix.width = dev->width;
+ f->fmt.pix.height = dev->height;
+ f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+ f->fmt.pix.bytesperline = dev->width * 2;
+ f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ f->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+ struct vb2_queue *q = &dev->vb_vidq;
+
+ if (vb2_is_busy(q))
+ return -EBUSY;
+
+ vidioc_try_fmt_vid_cap(file, priv, f);
+ return 0;
+}
+
+static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, querystd, norm);
+ return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ *norm = dev->norm;
+ return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+ struct vb2_queue *q = &dev->vb_vidq;
+
+ if (vb2_is_busy(q))
+ return -EBUSY;
+
+ if (!dev->udev)
+ return -ENODEV;
+
+ dev->norm = *norm;
+ if (dev->norm & V4L2_STD_525_60) {
+ dev->width = SMI2021_BYTES_PER_LINE / 2;
+ dev->height = SMI2021_NTSC_LINES;
+ } else if (dev->norm & V4L2_STD_625_50) {
+ dev->width = SMI2021_BYTES_PER_LINE / 2;
+ dev->height = SMI2021_PAL_LINES;
+ } else {
+ smi2021_err("Invalid standard\n");
+ return -EINVAL;
+ }
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+ return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *i)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ if (i->index >= inputs)
+ return -EINVAL;
+
+ strlcpy(i->name, input[i->index].name, sizeof(i->name));
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+ i->std = dev->vdev.tvnorms;
+ return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ *i = dev->ctl_input;
+ return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ struct smi2021_dev *dev = video_drvdata(file);
+
+ if (i >= inputs)
+ return -EINVAL;
+
+ dev->ctl_input = i;
+ smi2021_set_input(dev);
+
+ return 0;
+}
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ switch (chip->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ chip->ident = V4L2_IDENT_NONE;
+ chip->revision = 0;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct v4l2_ioctl_ops smi2021_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+ .vidioc_querystd = vidioc_querystd,
+ .vidioc_g_std = vidioc_g_std,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+
+ /* vb2 handle these */
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+ .vidioc_g_chip_ident = vidioc_g_chip_ident,
+
+};
+
+/******************************************************************************/
+/* */
+/* Videobuf2 operations */
+/* */
+/******************************************************************************/
+static int queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *v4l2_fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct smi2021_dev *dev = vb2_get_drv_priv(vq);
+ unsigned long size;
+
+ size = dev->width * dev->height * 2;
+
+ *nbuffers = clamp_t(unsigned int, *nbuffers, 4, 16);
+ smi2021_dbg("Requesting %u buffers\n", *nbuffers);
+
+ /* Packed color format */
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+ unsigned long flags;
+ struct smi2021_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
+ struct smi2021_buffer *buf = container_of(vb, struct smi2021_buffer, vb);
+
+ spin_lock_irqsave(&dev->buf_lock, flags);
+ if (!dev->udev) {
+ /*
+ * If the device is disconnected return the buffer to userspace
+ * directly. The next QBUF call will fail with -ENODEV.
+ */
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ } else {
+ buf->mem = vb2_plane_vaddr(vb, 0);
+ buf->length = vb2_plane_size(vb, 0);
+
+ buf->pos = 0;
+ buf->trc_av = 0;
+ buf->in_blank = true;
+ buf->second_field = false;
+
+ if (buf->length < dev->width * dev->height * 2)
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ else
+ list_add_tail(&buf->list, &dev->avail_bufs);
+ }
+ spin_unlock_irqrestore(&dev->buf_lock, flags);
+}
+
+static int start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct smi2021_dev *dev = vb2_get_drv_priv(vq);
+ int rc, i;
+
+ if (!dev->udev)
+ return -ENODEV;
+
+ dev->sync_state = HSYNC;
+ dev->buf_count = 0;
+
+ if (mutex_lock_interruptible(&dev->v4l2_lock))
+ return -ERESTARTSYS;
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
+
+ rc = smi2021_set_hw_state(dev, SMI2021_HW_STATE_CAPTURE);
+ if (rc < 0) {
+ smi2021_err("can't start hw\n");
+ goto out_unlock;
+ }
+
+ smi2021_write_reg(dev, 0, SMI2021_AUDIO_PORT, SMI2021_AUDIO_ENABLE);
+
+ if (!dev->isoc_ctl.num_bufs) {
+ rc = smi2021_alloc_isoc(dev);
+ if (rc < 0)
+ goto out_stop_hw;
+ }
+
+ /* submit urbs and enable IRQ */
+ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+ rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_KERNEL);
+ if (rc) {
+ smi2021_err("can't submit urb[%d] (%d)\n", i, rc);
+ goto out_uninit;
+ }
+ }
+
+ mutex_unlock(&dev->v4l2_lock);
+ return 0;
+
+out_uninit:
+ smi2021_uninit_isoc(dev);
+out_stop_hw:
+ usb_set_interface(dev->udev, 0, 0);
+ smi2021_clear_queue(dev);
+
+out_unlock:
+ mutex_unlock(&dev->v4l2_lock);
+
+ return rc;
+}
+
+static int stop_streaming(struct vb2_queue *vq)
+{
+ struct smi2021_dev *dev = vb2_get_drv_priv(vq);
+ /* HACK: Stop the audio subsystem,
+ * without this, the pcm middle-layer will hang waiting for more data.
+ *
+ * Is there a better way to do this?
+ */
+ if (dev->pcm_substream && dev->pcm_substream->runtime) {
+ struct snd_pcm_runtime *runtime = dev->pcm_substream->runtime;
+ if (runtime->status) {
+ runtime->status->state = SNDRV_PCM_STATE_DRAINING;
+ wake_up(&runtime->sleep);
+ }
+ }
+
+ if (mutex_lock_interruptible(&dev->v4l2_lock))
+ return -ERESTARTSYS;
+
+ smi2021_cancel_isoc(dev);
+ smi2021_free_isoc(dev);
+ smi2021_stop_hw(dev);
+ smi2021_clear_queue(dev);
+ smi2021_dbg("Streaming stopped!\n");
+
+ mutex_unlock(&dev->v4l2_lock);
+
+ return 0;
+}
+
+static struct vb2_ops smi2021_video_qops = {
+ .queue_setup = queue_setup,
+ .buf_queue = buffer_queue,
+ .start_streaming = start_streaming,
+ .stop_streaming = stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static struct video_device v4l2_template = {
+ .name = "easycap_smi2021_dc60",
+ .tvnorms = V4L2_STD_ALL,
+ .fops = &smi2021_fops,
+ .ioctl_ops = &smi2021_ioctl_ops,
+ .release = video_device_release_empty,
+};
+
+/* Must be called with both v4l2_lock and vb_queue_lock hold */
+void smi2021_clear_queue(struct smi2021_dev *dev)
+{
+ struct smi2021_buffer *buf;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->buf_lock, flags);
+ while (!list_empty(&dev->avail_bufs)) {
+ buf = list_first_entry(&dev->avail_bufs,
+ struct smi2021_buffer, list);
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ }
+ dev->isoc_ctl.buf = NULL;
+ spin_unlock_irqrestore(&dev->buf_lock, flags);
+}
+
+int smi2021_vb2_setup(struct smi2021_dev *dev)
+{
+ int rc;
+ struct vb2_queue *q;
+
+ q = &dev->vb_vidq;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR;
+ q->drv_priv = dev;
+ q->buf_struct_size = sizeof(struct smi2021_buffer);
+ q->ops = &smi2021_video_qops;
+ q->mem_ops = &vb2_vmalloc_memops;
+
+ rc = vb2_queue_init(q);
+ if (rc < 0)
+ return rc;
+
+ /* Initialize video dma queue */
+ INIT_LIST_HEAD(&dev->avail_bufs);
+
+ return 0;
+}
+
+int smi2021_video_register(struct smi2021_dev *dev)
+{
+ int rc;
+
+ dev->vdev = v4l2_template;
+ dev->vdev.queue = &dev->vb_vidq;
+
+ dev->vdev.lock = &dev->v4l2_lock;
+ dev->vdev.queue->lock = &dev->vb_queue_lock;
+
+ dev->vdev.v4l2_dev = &dev->v4l2_dev;
+ set_bit(V4L2_FL_USE_FH_PRIO, &dev->vdev.flags);
+
+ /* PAL is default */
+ dev->norm = V4L2_STD_PAL;
+ dev->width = SMI2021_BYTES_PER_LINE / 2;
+ dev->height = SMI2021_PAL_LINES;
+
+ if (dev->device_cfg == SMI2021_DUAL_INPUT) {
+ input = dual_input;
+ inputs = ARRAY_SIZE(dual_input);
+ } else {
+ input = quad_input;
+ inputs = ARRAY_SIZE(quad_input);
+ }
+
+ dev->fmt = &format[0];
+
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+ smi2021_set_input(dev);
+
+ video_set_drvdata(&dev->vdev, dev);
+ rc = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
+ if (rc < 0) {
+ smi2021_err("video_register_device failed %d\n", rc);
+ return rc;
+ }
+
+ v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
+ video_device_node_name(&dev->vdev));
+
+ return 0;
+}
diff --git a/drivers/media/usb/smi2021/smi2021_video.c b/drivers/media/usb/smi2021/smi2021_video.c
new file mode 100644
index 0000000..4a71f20
--- /dev/null
+++ b/drivers/media/usb/smi2021/smi2021_video.c
@@ -0,0 +1,544 @@
+/*******************************************************************************
+ * smi2021_video.c *
+ * *
+ * USB Driver for SMI2021 - EasyCAP *
+ * *****************************************************************************
+ *
+ * Copyright 2011-2013 Jon Arne Jørgensen
+ * <jonjon.arnearne--a.t--gmail.com>
+ *
+ * Copyright 2011, 2012 Tony Brown, Michal Demin, Jeffry Johnston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * This driver is heavily influensed by the STK1160 driver.
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ */
+
+#include "smi2021.h"
+
+static void print_usb_err(struct smi2021_dev *dev, int packet, int status)
+{
+ char *errmsg;
+
+ switch (status) {
+ case -ENOENT:
+ errmsg = "unlinked synchronuously";
+ break;
+ case -ECONNRESET:
+ errmsg = "unlinked asynchronuously";
+ break;
+ case -ENOSR:
+ errmsg = "Buffer error (overrun)";
+ break;
+ case -EPIPE:
+ errmsg = "Stalled (device not responding)";
+ break;
+ case -EOVERFLOW:
+ errmsg = "Babble (bad cable?)";
+ break;
+ case -EPROTO:
+ errmsg = "Bit-stuff error (bad cable?)";
+ break;
+ case -EILSEQ:
+ errmsg = "CRC/Timeout (could be anything)";
+ break;
+ case -ETIME:
+ errmsg = "Device does not respond";
+ break;
+ case -EXDEV:
+ errmsg = "Trying to capture from unconnected input?";
+ break;
+ default:
+ errmsg = "Unknown";
+ }
+
+ if (packet < 0) {
+ printk_ratelimited(KERN_WARNING "Urb status %d [%s]\n",
+ status, errmsg);
+ } else {
+ printk_ratelimited(KERN_INFO "URB packet %d, status %d [%s]\n",
+ packet, status, errmsg);
+ }
+}
+
+static struct smi2021_buffer *smi2021_next_buffer(struct smi2021_dev *dev)
+{
+ struct smi2021_buffer *buf = NULL;
+ unsigned long flags = 0;
+
+ WARN_ON(dev->isoc_ctl.buf);
+
+ spin_lock_irqsave(&dev->buf_lock, flags);
+ if (!list_empty(&dev->avail_bufs)) {
+ buf = list_first_entry(&dev->avail_bufs, struct smi2021_buffer,
+ list);
+ list_del(&buf->list);
+#ifdef DEBUG
+ } else if (printk_ratelimit()) {
+ smi2021_dbg("No buffers in queue!\n");
+#endif
+ }
+ spin_unlock_irqrestore(&dev->buf_lock, flags);
+
+ return buf;
+}
+
+static void smi2021_buffer_done(struct smi2021_dev *dev)
+{
+ struct smi2021_buffer *buf = dev->isoc_ctl.buf;
+
+ dev->buf_count++;
+ v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
+ buf->vb.v4l2_buf.sequence = dev->buf_count >> 1;
+ buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED;
+ buf->vb.v4l2_buf.flags |= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+
+ if (buf->pos < dev->width * dev->height * 2) {
+ buf->vb.v4l2_buf.bytesused = 0;
+ vb2_set_plane_payload(&buf->vb, 0, 0);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+ } else {
+ buf->vb.v4l2_buf.bytesused = buf->pos;
+ vb2_set_plane_payload(&buf->vb, 0, buf->pos);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
+ }
+ dev->isoc_ctl.buf = NULL;
+}
+
+static void copy_video(struct smi2021_dev *dev, u8 p)
+{
+ struct smi2021_buffer *buf = dev->isoc_ctl.buf;
+
+ int lines_per_field = dev->height / 2;
+ int line = 0;
+ int pos_in_line = 0;
+ unsigned int offset = 0;
+ u8 *dst;
+
+ if (buf == NULL)
+ return;
+
+ if (buf->in_blank)
+ return;
+
+ if (buf->pos >= buf->length) {
+ if (buf->second_field == 0) {
+ /* We are probably trying to capture from
+ * a unconnected input
+ */
+ smi2021_buffer_done(dev);
+ } else {
+ printk_ratelimited(KERN_WARNING
+ "Buffer overflow!, max: %d bytes, av_lines_found: %d, second_field: %d\n",
+ buf->length, buf->trc_av,
+ buf->second_field);
+ }
+ return;
+ }
+
+ pos_in_line = buf->pos % SMI2021_BYTES_PER_LINE;
+ line = buf->pos / SMI2021_BYTES_PER_LINE;
+ if (line >= lines_per_field)
+ line -= lines_per_field;
+
+ if (line != buf->trc_av - 1) {
+ /* Keep video synchronized.
+ * The device will sometimes give us to many bytes
+ * for a line, before we get a new TRC.
+ * We just drop these bytes */
+ return;
+ }
+
+ if (buf->second_field)
+ offset += SMI2021_BYTES_PER_LINE;
+
+ offset += (SMI2021_BYTES_PER_LINE * line * 2) + pos_in_line;
+
+ /* Will this ever happen? */
+ if (offset >= buf->length) {
+ printk_ratelimited(KERN_INFO
+ "Offset calculation error, field: %d, line: %d, pos_in_line: %d\n",
+ buf->second_field, line, pos_in_line);
+ return;
+ }
+
+ dst = buf->mem + offset;
+ *dst = p;
+ buf->pos++;
+}
+
+#define is_sav(trc) \
+ ((trc & SMI2021_TRC_EAV) == 0x00)
+#define is_field2(trc) \
+ ((trc & SMI2021_TRC_FIELD_2) == SMI2021_TRC_FIELD_2)
+#define is_active_video(trc) \
+ ((trc & SMI2021_TRC_VBI) == 0x00)
+/*
+ * Parse the TRC.
+ * Grab a new buffer from the queue if don't have one
+ * and we are recieving the start of a video frame.
+ *
+ * Mark video buffers as done if we have one full frame.
+ */
+static void parse_trc(struct smi2021_dev *dev, u8 trc)
+{
+ struct smi2021_buffer *buf = dev->isoc_ctl.buf;
+ int lines_per_field = dev->height / 2;
+ int line = 0;
+
+ if (buf == NULL) {
+ if (!is_sav(trc))
+ return;
+
+ if (!is_active_video(trc))
+ return;
+
+ if (is_field2(trc))
+ return;
+
+ buf = smi2021_next_buffer(dev);
+ if (buf == NULL)
+ return;
+
+ dev->isoc_ctl.buf = buf;
+ }
+
+ if (is_sav(trc)) {
+ /* Start of VBI or ACTIVE VIDEO */
+ if (is_active_video(trc)) {
+ buf->in_blank = false;
+ buf->trc_av++;
+ } else {
+ /* VBI */
+ buf->in_blank = true;
+ }
+
+ if (!buf->second_field && is_field2(trc)) {
+ line = buf->pos / SMI2021_BYTES_PER_LINE;
+ if (line < lines_per_field)
+ goto buf_done;
+
+ buf->second_field = true;
+ buf->trc_av = 0;
+ }
+
+ if (buf->second_field && !is_field2(trc))
+ goto buf_done;
+ } else {
+ /* End of VBI or ACTIVE VIDEO */
+ buf->in_blank = true;
+ }
+
+ return;
+
+buf_done:
+ smi2021_buffer_done(dev);
+}
+
+/*
+ * Scan the saa7113 Active video data.
+ * This data is:
+ * 4 bytes header (0xff 0x00 0x00 [TRC/SAV])
+ * 1440 bytes of UYUV Video data
+ * 4 bytes footer (0xff 0x00 0x00 [TRC/EAV])
+ *
+ * TRC = Time Reference Code.
+ * SAV = Start Active Video.
+ * EAV = End Active Video.
+ * This is described in the saa7113 datasheet.
+ */
+static void parse_video(struct smi2021_dev *dev, u8 *p, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ switch (dev->sync_state) {
+ case HSYNC:
+ if (p[i] == 0xff)
+ dev->sync_state = SYNCZ1;
+ else
+ copy_video(dev, p[i]);
+ break;
+ case SYNCZ1:
+ if (p[i] == 0x00) {
+ dev->sync_state = SYNCZ2;
+ } else {
+ dev->sync_state = HSYNC;
+ copy_video(dev, 0xff);
+ copy_video(dev, p[i]);
+ }
+ break;
+ case SYNCZ2:
+ if (p[i] == 0x00) {
+ dev->sync_state = TRC;
+ } else {
+ dev->sync_state = HSYNC;
+ copy_video(dev, 0xff);
+ copy_video(dev, 0x00);
+ copy_video(dev, p[i]);
+ }
+ break;
+ case TRC:
+ dev->sync_state = HSYNC;
+ parse_trc(dev, p[i]);
+ break;
+ }
+ }
+
+}
+/*
+ *
+ * The device delivers data in chunks of 0x400 bytes.
+ * The four first bytes is a magic header to identify the chunks.
+ * 0xaa 0xaa 0x00 0x00 = saa7113 Active Video Data
+ * 0xaa 0xaa 0x00 0x01 = PCM - 24Bit 2 Channel audio data
+ */
+static void process_packet(struct smi2021_dev *dev, u8 *p, int len)
+{
+ int i;
+ u32 *header;
+
+ if (len % 0x400 != 0) {
+ printk_ratelimited(KERN_INFO "smi2021::%s: len: %d\n",
+ __func__, len);
+ return;
+ }
+
+ for (i = 0; i < len; i += 0x400) {
+ header = (u32 *)(p + i);
+ switch (*header) {
+ case cpu_to_be32(0xaaaa0000): {
+ parse_video(dev, p+i+4, 0x400-4);
+ break;
+ }
+ case cpu_to_be32(0xaaaa0001): {
+ smi2021_audio(dev, p+i+4, 0x400-4);
+ break;
+ }
+ default: {
+ /* Nothing */
+ }
+ }
+ }
+}
+
+/*
+ * Interrupt called by URB callback
+ */
+static void smi2021_isoc_isr(struct urb *urb)
+{
+ int i, rc, status, len;
+ struct smi2021_dev *dev = urb->context;
+ u8 *p;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET: /* kill */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* uvc driver frees the queue here */
+ return;
+ default:
+ smi2021_err("urb error! status %d\n", urb->status);
+ return;
+ }
+
+ if (urb->status < 0)
+ print_usb_err(dev, -1, status);
+
+ if (dev == NULL) {
+ smi2021_warn("called with null device\n");
+ return;
+ }
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+
+ status = urb->iso_frame_desc[i].status;
+
+ if (status < 0) {
+ print_usb_err(dev, i, status);
+ continue;
+ }
+
+ p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+ len = urb->iso_frame_desc[i].actual_length;
+ process_packet(dev, p, len);
+ }
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc)
+ smi2021_err("urb re-submit failed (%d)\n", rc);
+}
+
+/*
+ * Cancel urbs
+ * This function can not be called in atomic context
+ */
+void smi2021_cancel_isoc(struct smi2021_dev *dev)
+{
+ int i, num_bufs = dev->isoc_ctl.num_bufs;
+ if (!num_bufs)
+ return;
+
+ smi2021_dbg("killing %d urbs...\n", num_bufs);
+
+ for (i = 0; i < num_bufs; i++)
+ usb_kill_urb(dev->isoc_ctl.urb[i]);
+
+ smi2021_dbg("all urbs killed\n");
+
+}
+
+/*
+ * Releases urb and transfer buffers
+ * Obviously, associated urb must be killed before releasing it
+ */
+void smi2021_free_isoc(struct smi2021_dev *dev)
+{
+ struct urb *urb;
+ int i, num_bufs = dev->isoc_ctl.num_bufs;
+
+ smi2021_dbg("freeing %d urb buffers...\n", num_bufs);
+
+ for (i = 0; i < num_bufs; i++) {
+ urb = dev->isoc_ctl.urb[i];
+ if (urb) {
+ if (dev->isoc_ctl.transfer_buffer[i]) {
+#ifndef CONFIG_DMA_NONCOHERENT
+ usb_free_coherent(dev->udev,
+ urb->transfer_buffer_length,
+ dev->isoc_ctl.transfer_buffer[i],
+ urb->transfer_dma);
+#else
+ kfree(dev->isoc_ctl.transfer_buffer[i]);
+#endif
+ }
+ usb_free_urb(urb);
+ dev->isoc_ctl.urb[i] = NULL;
+ }
+ dev->isoc_ctl.transfer_buffer[i] = NULL;
+ }
+
+ kfree(dev->isoc_ctl.urb);
+ kfree(dev->isoc_ctl.transfer_buffer);
+
+ dev->isoc_ctl.urb = NULL;
+ dev->isoc_ctl.transfer_buffer = NULL;
+ dev->isoc_ctl.num_bufs = 0;
+
+ smi2021_dbg("all urb buffers freed\n");
+}
+
+/*
+ * Helper for canceling and freeing urbs
+ * This function can not be called in atomic context
+ */
+void smi2021_uninit_isoc(struct smi2021_dev *dev)
+{
+ smi2021_cancel_isoc(dev);
+ smi2021_free_isoc(dev);
+}
+
+
+int smi2021_alloc_isoc(struct smi2021_dev *dev)
+{
+ struct urb *urb;
+ int i, j, k, sb_size, max_packets, num_bufs;
+
+ if (dev->isoc_ctl.num_bufs)
+ smi2021_uninit_isoc(dev);
+
+ num_bufs = SMI2021_ISOC_BUFS;
+ max_packets = SMI2021_ISOC_PACKETS;
+ sb_size = max_packets * SMI2021_MAX_PKT_SIZE;
+
+ dev->isoc_ctl.buf = NULL;
+ dev->isoc_ctl.max_pkt_size = SMI2021_MAX_PKT_SIZE;
+ dev->isoc_ctl.urb = kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
+ if (!dev->isoc_ctl.urb) {
+ smi2021_err("out of memory for urb array\n");
+ return -ENOMEM;
+ }
+
+ dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *) * num_bufs,
+ GFP_KERNEL);
+ if (!dev->isoc_ctl.transfer_buffer) {
+ smi2021_err("out of memory for usb transfer\n");
+ kfree(dev->isoc_ctl.urb);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < num_bufs; i++) {
+ urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+ if (!urb) {
+ smi2021_err("connot allocate urb[%d]\n", i);
+ goto free_i_bufs;
+ }
+ dev->isoc_ctl.urb[i] = urb;
+#ifndef CONFIG_DMA_NONCOHERENT
+ dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(
+ dev->udev, sb_size, GFP_KERNEL,
+ &urb->transfer_dma);
+#else
+ dev->isoc_ctl.transfer_buffer[i] = kmalloc(sb_size,
+ GFP_KERNEL);
+#endif
+ if (!dev->isoc_ctl.transfer_buffer[i]) {
+ smi2021_err("cannot alloc %d bytes for tx[%d] buffer",
+ sb_size, i);
+ goto free_i_bufs;
+ }
+ /* Do not leak kernel data */
+ memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
+
+ urb->dev = dev->udev;
+ urb->pipe = usb_rcvisocpipe(dev->udev, SMI2021_ISOC_EP);
+ urb->transfer_buffer = dev->isoc_ctl.transfer_buffer[i];
+ urb->transfer_buffer_length = sb_size;
+ urb->complete = smi2021_isoc_isr;
+ urb->context = dev;
+ urb->interval = 1;
+ urb->start_frame = 0;
+ urb->number_of_packets = max_packets;
+#ifndef CONFIG_DMA_NONCOHERENT
+ urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+#else
+ urb->transfer_flags = URB_ISO_ASAP;
+#endif
+ k = 0;
+ for (j = 0; j < max_packets; j++) {
+ urb->iso_frame_desc[j].offset = k;
+ urb->iso_frame_desc[j].length =
+ dev->isoc_ctl.max_pkt_size;
+ k += dev->isoc_ctl.max_pkt_size;
+ }
+ }
+ smi2021_dbg("urbs allocated\n");
+ dev->isoc_ctl.num_bufs = num_bufs;
+ return 0;
+
+free_i_bufs:
+ dev->isoc_ctl.num_bufs = i+1;
+ smi2021_free_isoc(dev);
+ return -ENOMEM;
+}
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-04-25 21:41    [W:0.118 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site