lkml.org 
[lkml]   [2013]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: linux-next: Tree for Apr 24 [ PM: Device 1-1.2 failed to resume async: error -32 ]
From
On Wed, Apr 24, 2013 at 10:00 PM, Sedat Dilek <sedat.dilek@gmail.com> wrote:
> On Wed, Apr 24, 2013 at 10:07 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>> Hi all,
>>
>> There will be no linux-next release tomorrow (April 25).
>>
>> Changes since 20130423:
>>
>> The net-next tree lost its build failure.
>>
>> The staging tree gained a build failure for which I disabled a driver.
>>
>> The arm-soc tree gained a conflict against the pm tree.
>>
>> ----------------------------------------------------------------------------
>>
>
> [ CC linux-pm and linux-usb (ehci) folks ]
>
> This happens with my external USB mouse after suspend/resume.
>
> Excerpt (full dmesg and kernel-config attached):
>
> $ dmesg | egrep -i 'usb|async' | grep 1-1.2
> [ 1.258602] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
> [ 1.368649] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
> [ 1.368661] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 1.368668] usb 1-1.2: Product: USB-PS/2 Optical Mouse
> [ 1.368672] usb 1-1.2: Manufacturer: Logitech
> [ 1.957999] input: Logitech USB-PS/2 Optical Mouse as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
> [ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
> [ 62.636893] PM: Device 1-1.2 failed to resume async: error -32
> [ 64.243543] usb 1-1.2: USB disconnect, device number 3
> [ 64.380328] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
> [ 64.477612] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e
> [ 64.477618] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 64.477621] usb 1-1.2: Product: USB-PS/2 Optical Mouse
> [ 64.477623] usb 1-1.2: Manufacturer: Logitech
> [ 64.481934] input: Logitech USB-PS/2 Optical Mouse as
> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
>

Thos 3 lines IIRC are important (one line missing above):

[ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci
[ 62.636877] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32
[ 62.636893] PM: Device 1-1.2 failed to resume async: error -32

- Sedat -

> Any help/hints/infos welcome :-)!
>
> Regards,
> - Sedat .-


\
 
 \ /
  Last update: 2013-04-24 23:01    [W:0.037 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site