lkml.org 
[lkml]   [2013]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] usb: ehci-fsl: set INCR8 mode only on MPC512x
Sorry, please ignore this temporarily since looks this is already covered in tree.

I will look further into this to send another version.

Tiejun

On 04/24/2013 10:55 AM, Tiejun Chen wrote:
> commit 761bbcb7, "usb: ehci-fsl: set INCR8 mode for system bus interface
> on MPC512x", introduced to fix one MPC5121e (M36P) Errata by setting
> INCR8 mode for system bus interface on MPC512x, but we should make sure
> this is only valid for MPC512x like other parts of this commit. Otherwise
> this would issue other platforms as abnormal without this similar Errata.
>
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> drivers/usb/host/ehci-fsl.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index d81d2fc..f4f2a7b 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -509,7 +509,15 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
> ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
> hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
>
> - ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
> + if (of_device_is_compatible(dev->parent->of_node,
> + "fsl,mpc5121-usb2-dr")) {
> + /*
> + * set SBUSCFG:AHBBRST so that control msgs don't
> + * fail when doing heavy PATA writes.
> + */
> + ehci_writel(ehci, SBUSCFG_INCR8,
> + hcd->regs + FSL_SOC_USB_SBUSCFG);
> + }
>
> /* restore EHCI registers */
> ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
>



\
 
 \ /
  Last update: 2013-04-24 05:21    [W:0.150 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site