lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c-designware: fix RX FIFO overrun
On Fri, Apr 19, 2013 at 07:05:30PM +0100, Josef Ahmad wrote:
> >From a969728248c3b439dc97a69e7dac133b5efa34e7 Mon Sep 17 00:00:00 2001
> From: Josef Ahmad <josef.ahmad@linux.intel.com>
> Date: Fri, 19 Apr 2013 17:28:10 +0100
> Subject: [PATCH] i2c-designware: fix RX FIFO overrun
>
> i2c_dw_xfer_msg() pushes a number of bytes to transmit/receive
> to/from the bus into the TX FIFO.
> For master-rx transactions, the maximum amount of data that can be
> received is calculated depending solely on TX and RX FIFO load.
>
> This is racy - TX FIFO may contain master-rx data yet to be
> processed, which will eventually land into the RX FIFO. This
> data is not taken into account and the function may request more
> data than the controller is actually capable of storing.
>
> This patch ensures the driver takes into account the outstanding
> master-rx data in TX FIFO to prevent RX FIFO overrun.

Can you add something to the changelog to show what the error looks like
(a dump from dmesg for example)?

> Signed-off-by: Josef Ahmad <josef.ahmad@linux.intel.com>
> ---
> drivers/i2c/busses/i2c-designware-core.c | 11 ++++++++++-
> drivers/i2c/busses/i2c-designware-core.h | 2 ++
> 2 files changed, 12 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
> index 94fd818..8dbeef1 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -426,8 +426,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
> cmd |= BIT(9);
>
> if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
> +
> + /* avoid rx buffer overrun */
> + if (rx_limit - dev->rx_outstanding <= 0)
> + break;
> +
> dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
> rx_limit--;
> + dev->rx_outstanding++;

Instead of adding a new variable, is there something preventing a use of
DW_IC_STATUS bits RFNE and TFNF?

> } else
> dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
> tx_limit--; buf_len--;
> @@ -480,8 +486,10 @@ i2c_dw_read(struct dw_i2c_dev *dev)
>
> rx_valid = dw_readl(dev, DW_IC_RXFLR);
>
> - for (; len > 0 && rx_valid > 0; len--, rx_valid--)
> + for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
> *buf++ = dw_readl(dev, DW_IC_DATA_CMD);
> + dev->rx_outstanding--;
> + }
>
> if (len > 0) {
> dev->status |= STATUS_READ_IN_PROGRESS;
> @@ -539,6 +547,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
> dev->msg_err = 0;
> dev->status = STATUS_IDLE;
> dev->abort_source = 0;
> + dev->rx_outstanding = 0;
>
> ret = i2c_dw_wait_bus_not_busy(dev);
> if (ret < 0)


\
 
 \ /
  Last update: 2013-04-22 09:41    [W:0.097 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site