lkml.org 
[lkml]   [2013]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS
On 04/17/2013 10:16 PM, Dan Murphy wrote:
> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> are different.
(..)
> diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
> index 03bd60d..0c48f6b 100644
> --- a/arch/arm/boot/dts/omap4-panda-common.dtsi
> +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
(..)
> @@ -135,6 +136,25 @@
> 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
> >;
> };
> +
> + led_gpio_pins: pinmux_leds_pins {
> + pinctrl-single,pins = <
> + >;
> + };
> +};

Hi,

FYI, there was a recent discussion precisely on this topic, where Tomy
suggested to remove the empty section:
http://marc.info/?l=linux-omap&m=136546635409232&w=2

Apart from that, I just tested your patch on top of Tomy's
omap-for-v3.10/dt branch and it is working fine for me on PandaBoards
EA3, A4 and ES.

Tested-by: Vincent Stehlé <v-stehle@ti.com>

Best regards,

V.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-04-18 12:01    [W:0.138 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site