lkml.org 
[lkml]   [2013]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[ 29/64] PCI/ACPI: Always resume devices on ACPI wakeup notifications
Date
3.8-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

commit 24ad0ef9c8b946ed2abe681e4e44f4a1e643d882 upstream.

It turns out that the _Lxx control methods provided by some BIOSes
clear the PME Status bit of PCI devices they handle, which means that
pci_acpi_wake_dev() cannot really use that bit to check whether or
not the device has signalled wakeup.

One symptom of the problem is, for example, that when an affected PCI
USB controller is runtime-suspended, then plugging in a new USB device
into one of the controller's ports will not wake up the controller,
which should happen.

For this reason, make pci_acpi_wake_dev() always attempt to resume
the device it is called for regardless of the device's PME Status bit
value (that bit still has to be cleared if set at this point,
though).

Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/pci/pci-acpi.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -53,14 +53,15 @@ static void pci_acpi_wake_dev(acpi_handl
return;
}

- if (!pci_dev->pm_cap || !pci_dev->pme_support
- || pci_check_pme_status(pci_dev)) {
- if (pci_dev->pme_poll)
- pci_dev->pme_poll = false;
+ /* Clear PME Status if set. */
+ if (pci_dev->pme_support)
+ pci_check_pme_status(pci_dev);

- pci_wakeup_event(pci_dev);
- pm_runtime_resume(&pci_dev->dev);
- }
+ if (pci_dev->pme_poll)
+ pci_dev->pme_poll = false;
+
+ pci_wakeup_event(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);

if (pci_dev->subordinate)
pci_pme_wakeup_bus(pci_dev->subordinate);



\
 
 \ /
  Last update: 2013-04-11 08:21    [W:0.196 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site