lkml.org 
[lkml]   [2013]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3.8.0-rc4+ - Oops on removing WinTV-HVR-1400 expresscard TV Tuner


On 03/08/13 00:39, Bjorn Helgaas wrote:
> On Thu, Mar 7, 2013 at 1:21 PM, Chris Clayton <chris2553@googlemail.com> wrote:
>>
>>
>> On 03/07/13 17:30, Bjorn Helgaas wrote:
>>>
>>> On Thu, Mar 7, 2013 at 9:28 AM, Chris Clayton <chris2553@googlemail.com>
>>> wrote:
>>>>
>>>>
>>>>
>>>> On 03/06/13 23:45, Bjorn Helgaas wrote:
>>>>>
>>>>>
>>>>> On Thu, Jan 31, 2013 at 5:09 AM, Chris Clayton
>>>>> <chris2553@googlemail.com>
>>>>> wrote:
>>>>>
>>>>>> My usb3 expresscard device has arrived and I get an oops with that too,
>>>>>> if I
>>>>>> remove it without unloading the driver first. I guess it shouldn't be a
>>>>>> surprise that the driver isn't expecting the device to disappear.
>>>>>>
>>>>>> As I mentioned, I have some trouble with the WinTV-HVR-1400 card, which
>>>>>> sometimes pops out again, if I push it into the slot too hard (but I'm
>>>>>> geeting better at that with practice). So what I've done (with the usb3
>>>>>> card
>>>>>> too) to avoid the oopsen is blacklist the driver in
>>>>>> /etc/modprobe.d/blacklist.conf and then load them when I'm sure the
>>>>>> card
>>>>>> is
>>>>>> properly inserted. Not exactly hotplug, but at least I don't have to
>>>>>> reboot
>>>>>> because of an oops- and it's not something I'm doing several times an
>>>>>> hour.
>>>>>
>>>>>
>>>>>
>>>>> Hi Chris,
>>>>>
>>>>> What's the current state of this? It sounds to me like it still
>>>>> doesn't work out of the box. Having to blacklist the driver and load
>>>>> it manually is a completely unacceptable user experience. If you have
>>>>> to manually choose acpiphp over pciehp, that is also unacceptable.
>>>>>
>>>>> So if you're still limping along with hacky workarounds like this, I'd
>>>>> like to pursue this more and see if we can't figure out a better
>>>>> solution.
>>>>>
>>>>> Bjorn
>>>>>
>>>> Hi Bjorn,
>>>>
>>>> If I unblacklist the driver, insert the HVR-1400 card and then remove it,
>>>> I
>>>> still get the oops. This is with kernel 3.8.2. I no longer get the oops
>>>> with
>>>> the USB3 card, but I don't know how or when that was fixed.
>>>>
>>>> I stopped working on it when, after finding the workaround to the oops
>>>> and
>>>> then spending many many hours figuring out a fix so that scandvb would
>>>> find
>>>> some channels, no one on the linux-media list seemed interested in the
>>>> fix.
>>>> On top of that, even though scanning now finds all the available
>>>> channels,
>>>> the quality of the TV picture and sound is very poor indeed. I didn't
>>>> want
>>>> to bang my head against the linux-media wall again, so I abandoned the
>>>> card
>>>> and now use a USB TV stick, which gives is much better results than the
>>>> card. It's a pity because the card also supports an analog signal which
>>>> means I can watch the RF output from my satellite box, which I have piped
>>>> around the house. Anyway, the linux-media folks are not your problem and
>>>> if
>>>> I want to watch satellite TV on my laptop, I can make one of my rare
>>>> visits
>>>> to Windows (where the picture and sound are good).
>>>>
>>>> Having said (ranted?) all that, I would be more than happy to help fix
>>>> the
>>>> oops. After I first reported it, I realised that I didn't have a hotplug
>>>> driver loaded. With help from Yijing Wang, we eventually managed to get
>>>> the
>>>> card recognised and drivers loaded when it is inserted. That doesn't help
>>>> with the oops, though. I now have the pciehp driver compiled statically
>>>> onto
>>>> the kernel (and pass pcie_ports=native to the kernel), but removing the
>>>> card
>>>> with the cx23885 driver loaded always results in an oops. I originally
>>>> reported this to the linux-media list because functions from the cx23885
>>>> driver are at the top of the call trace, but only Martin responded with
>>>> some
>>>> hotplug-related suggestions, which is what swung discussion the way of
>>>> the
>>>> linux-pci list.
>>>
>>>
>>> OK. There are several potential problems here.
>>>
>>> 1) The change to make scandvb find some channels. This is probably a
>>> cx23885 or linux-media issue, and I can't help with that.
>>>
>>> 2) TV picture/sound quality problem. Again, probably a cx23885 driver
>>> issue, and I can't help with that.
>>>
>>
>> I'm not going to use the card and I don't have the time (or patience) to
>> submit the change again.
>>
>>
>>> 3) HVR-1400 not being recognized when inserted. This is a PCI hotplug
>>> issue, and I *can* help with this. I don't know what your hardware
>>> is, but in general, pciehp should take care of this. If it doesn't,
>>> or if you have to use an argument like "pcie_ports=native", we should
>>> fix this.
>>>
>>> 4) Oops when removing HVR-1400 ExpressCard. From the backtrace, I
>>> assume the cx23885 driver is still bound to the device when you remove
>>> the card. It'd be nice if the driver could handle the device going
>>> away, but I'm not surprised that it doesn't.
>>
>> Nor am I, but it's hardly plug and play, is it. With Windows I can plug and
>> unplug the card at will without crashing the system.
>
> I agree 100%, that sucks, and we should be able to do better. I
> opened https://bugzilla.kernel.org/show_bug.cgi?id=54961 for this
> issue. Hopefully a cx88 driver person will take a look.
>

Thanks and sorry, Bjorn. I didn't intend to offload that task onto
someone else. The linux-media guys have so far been rather unresponsive
on my problems with the card, and I didn't want to waste any more time
on it. Let's see what happens - I won't be holding my breath, though :-)

>>> So 3) is the thing I might be able to help with. If there's still a
>>> problem here (and even having to boot with an argument is a problem),
>>> let's start by collecting complete dmesg logs, with and without your
>>> "pcie_ports" option. Boot without the card installed, then insert it
>>> and remove it. If you can use something like v3.9-rc1 with
>>> CONFIG_HOTPLUG_PCI_PCIE=y, that would be ideal.
>>
>> OK, I've gathered these logs using a kernel built from a pull of Linus' tree
>> this afternoon (v3.9-rc1-108-g9f22578). Also, the cx23885 driver is still
>> blacklisted to avoid unnecessary noise and the chance of an oops if the card
>> springs out again when I insert it. The driver does load if it's not
>> blacklisted (and the pcie_ports=native option is present).
>>
>> The two logs are attached. As you will see, nothing at all happens when the
>> pcie_ports=native option is absent. The nf_conntrack message is normally the
>> last one from a normal boot.
>
> Perfect, thanks!
>
> It looks like something's going wrong when we evaluate _OSC. Can you
> collect an acpidump from your machine?
>
A bziped file containing the output from acpidump is attached.

> It's possible your machine just doesn't want us to use pciehp. Can
> you set CONFIG_HOTPLUG_PCI_ACPI=y and try again (without
> pcie_ports=native this time)? You can test with a different
> ExpressCard if you want; this part of the problem isn't related to the
> HVR-1400.
>

Ok. With the same kernel as I used yesterday I've run two tests. Firstly
with both pciehp and acpiphp built statically into the kernel and
secondly with only acpiphp (both without pcie_ports=native). In neither
case was my pciexpress usb3 card detected when I plugged it in - that
is, the last line output by dmesg is the normal one from nf_conntrack. I
also turned on acpiphp debug and inserted the card, but again there was
no new output.

Chris
> Bjorn
>
[unhandled content-type:application/x-bzip2]
\
 
 \ /
  Last update: 2013-03-08 12:21    [W:0.110 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site