lkml.org 
[lkml]   [2013]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] PCI, ACPI: Don't query OSC support with all possible controls
Date
On Wednesday, March 27, 2013 09:28:58 PM Yinghai Lu wrote:
> Found problem on system that firmware that could handle pci aer.
> Firmware get error reporting after pci injecting error, before os boots.
> But after os boots, firmware can not get report anymore, even pci=noaer
> is passed.
>
> Root cause: BIOS _OSC has problem with query bit checking.
> It turns out that BIOS vendor is copying example code from ACPI Spec.
> In ACPI Spec 5.0, page 290:
>
> If (Not(And(CDW1,1))) // Query flag clear?
> { // Disable GPEs for features granted native control.
> If (And(CTRL,0x01)) // Hot plug control granted?
> {
> Store(0,HPCE) // clear the hot plug SCI enable bit
> Store(1,HPCS) // clear the hot plug SCI status bit
> }
> ...
> }
>
> When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe.
> So it will get into code path that should be for control set only.
> BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))"
>
> Current kernel code is using _OSC query to notify firmware about support
> from OS and then use _OSC to set control bits.
> During query support, current code is using all possible controls.
> So will execute code that should be only for control set stage.
>
> That will have problem when pci=noaer or aer firmware_first is used.
> As firmware have that control set for os aer already in query support stage,
> but later will not os aer handling.
>
> We should avoid passing all possible controls, just use osc_control_set
> instead.
> That should workaround BIOS bugs with affected systems on the field
> as more bios vendors are copying sample code from ACPI spec.
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Cc: stable@kernel.org
>
> ---
> drivers/acpi/pci_root.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> Index: linux-2.6/drivers/acpi/pci_root.c
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/pci_root.c
> +++ linux-2.6/drivers/acpi/pci_root.c
> @@ -201,8 +201,8 @@ static acpi_status acpi_pci_query_osc(st
> *control &= OSC_PCI_CONTROL_MASKS;
> capbuf[OSC_CONTROL_TYPE] = *control | root->osc_control_set;
> } else {
> - /* Run _OSC query for all possible controls. */
> - capbuf[OSC_CONTROL_TYPE] = OSC_PCI_CONTROL_MASKS;
> + /* Run _OSC query only with existing controls. */
> + capbuf[OSC_CONTROL_TYPE] = root->osc_control_set;

I suppose we can do that, but then why this should be root->osc_control_set and
not just 0?

> }
>
> status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
> --

Rafael


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2013-03-30 02:01    [W:0.054 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site