Messages in this thread | | | Date | Wed, 27 Mar 2013 13:05:24 +0100 | Subject | Re: [PATCH] powerpc: remove PReP | From | Geert Uytterhoeven <> |
| |
On Wed, Mar 27, 2013 at 11:47 AM, Paul Bolle <pebolle@tiscali.nl> wrote: > 3) I removed two files in documentation that are almost entirely PReP > specific. The remaining lines looked uninteresting.
> --- a/Documentation/powerpc/sound.txt > +++ /dev/null
> -2. IBM CHRP > - > - I have only tested this on the 43P-150. Build the kernel with the cs4232 > - set as a module and load the module with irq=9 dma=1 dma2=2 io=0x550
This section is CHRP-specific. The cs4232 driver also worked on the CHRP LongTrail. But I don't remember if the parameter values above also applied to LongTrail. I do remember it didn't work without specifing the right parameters, so you probably want to keep this section.
Gr{oetje,eeting}s,
Geert
-- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
| |