lkml.org 
[lkml]   [2013]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] pwm: pwm-tiecap: Update device-tree binding document
Date
Update binding document of pwm-tiecap to reflect the usage of similar
modules in da850 and am3xx SOCs.

Signed-off-by: Philip Avinash <avinashphilip@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 131e8c1..43c4e81 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -1,7 +1,9 @@
TI SOC ECAP based APWM controller

Required properties:
-- compatible: Must be "ti,am33xx-ecap"
+- compatible: Must be "ti,<soc>-ecap".
+ for am33xx - compatible = "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
First cell specifies the per-chip index of the PWM to use, the second
cell is the period in nanoseconds and bit 0 in the third cell is used to
@@ -15,9 +17,15 @@ Optional properties:

Example:

-ecap0: ecap@0 {
+ecap0: ecap@0 { /* ECAP on am33xx */
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
};
+
+ecap0: ecap@0 { /* ECAP on da850 */
+ compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x306000 0x80>;
+};
--
1.7.9.5


\
 
 \ /
  Last update: 2013-03-25 08:41    [W:0.060 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site