lkml.org 
[lkml]   [2013]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFC 5/5] e1000e: make PTP clock optional
From
Date
As proof of concept for new approach in managing cross-module dependencies this
patch resolves hard depencency between CONFIG_E1000E and CONFIG_PTP_1588_CLOCK.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Richard Cochran <richardcochran@gmail.com>
---
drivers/net/ethernet/intel/Kconfig | 2 +-
drivers/net/ethernet/intel/e1000e/Makefile | 3 ++-
drivers/net/ethernet/intel/e1000e/e1000.h | 5 +++++
3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 05f7264..4df239b 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -69,7 +69,7 @@ config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
- select PTP_1588_CLOCK
+ apply PTP_1588_CLOCK
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
index c2dcfcc..9c67c05 100644
--- a/drivers/net/ethernet/intel/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -34,5 +34,6 @@ obj-$(CONFIG_E1000E) += e1000e.o

e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
mac.o manage.o nvm.o phy.o \
- param.o ethtool.o netdev.o ptp.o
+ param.o ethtool.o netdev.o

+e1000e-$(CONFIG_PTP_1588_CLOCK) := ptp.o
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index fcc7581..c2819c0 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -510,8 +510,13 @@ extern const struct e1000_info e1000_pch2_info;
extern const struct e1000_info e1000_pch_lpt_info;
extern const struct e1000_info e1000_es2_info;

+#if IS_ENABLED(CONFIG_PTP_1588_CLOCK)
extern void e1000e_ptp_init(struct e1000_adapter *adapter);
extern void e1000e_ptp_remove(struct e1000_adapter *adapter);
+#else
+static inline void e1000e_ptp_init(struct e1000_adapter *adapter) { }
+static inline void e1000e_ptp_remove(struct e1000_adapter *adapter) { }
+#endif

static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{


\
 
 \ /
  Last update: 2013-03-21 10:01    [W:0.074 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site