lkml.org 
[lkml]   [2013]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
On 21/03/13 11:06, Mark Rutland wrote:
> Hi Rob,
>
> (adding Marc to Cc as he may have comments).
>
> On Wed, Mar 20, 2013 at 10:34:35PM +0000, Rob Herring wrote:
>> From: Rob Herring <rob.herring@calxeda.com>
>>
>> This converts arm and arm64 to use CLKSRC_OF DT based initialization for
>> the arch timer. A new function arch_timer_arch_init is added to allow for
>> arch specific setup.
>>
>> This has a side effect of enabling sched_clock on omap5 and exynos5. There
>> should not be any reason not to use the arch timers for sched_clock.
>
> Nice! I was just about to post a (slightly updated) version of Thomas Abraham's
> arch_timer clocksource_of_init patch, but this seems much more comprehensive.
>
> I have some other arch_timer patches which may clash, but they could be rebased
> atop of this.
>
>>
>> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: Kukjin Kim <kgene.kim@samsung.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Simon Horman <horms@verge.net.au>
>> Cc: Magnus Damm <magnus.damm@gmail.com>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> Cc: John Stultz <john.stultz@linaro.org>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: linux-samsung-soc@vger.kernel.org
>> Cc: linux-omap@vger.kernel.org
>> Cc: linux-sh@vger.kernel.org
>> ---
>> This is dependent on my CLKSRC_OF clean-up in arm-soc, my 64-bit sched_clock
>> support series, and Arnd's default machine descriptor patch (for default
>> clocksource_of_init call). This is only compile tested on arm.
>>
>> The full series (including sp804 work) is available here:
>> git://sources.calxeda.com/kernel/linux.git arm-timers
>>
>> Rob
>>
>
> [...]
>
>> diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
>> index d0ad789..6215717 100644
>> --- a/arch/arm/mach-vexpress/v2m.c
>> +++ b/arch/arm/mach-vexpress/v2m.c
>> @@ -1,6 +1,7 @@
>> /*
>> * Versatile Express V2M Motherboard Support
>> */
>> +#include <linux/clocksource.h>
>> #include <linux/device.h>
>> #include <linux/amba/bus.h>
>> #include <linux/amba/mmci.h>
>> @@ -23,7 +24,6 @@
>> #include <linux/regulator/machine.h>
>> #include <linux/vexpress.h>
>>
>> -#include <asm/arch_timer.h>
>> #include <asm/mach-types.h>
>> #include <asm/sizes.h>
>> #include <asm/mach/arch.h>
>> @@ -446,10 +446,7 @@ static void __init v2m_dt_timer_init(void)
>> irq_of_parse_and_map(node, 0));
>> }
>>
>> - arch_timer_of_register();
>> -
>> - if (arch_timer_sched_clock_init() != 0)
>> - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
>> + versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
>> 24000000);
>> }
>>
>
> On TC2 this series leads to using the vexpress 24MHz clock as the sched clock
> in preference to the architected timer:
>
> Architected local timer running at 24.00MHz (virt).
> Switching to timer-based delay loop
> Registered arch_counter_get_cntvct+0x0/0x14 as sched_clock source
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
> Registered versatile_read_sched_clock+0x0/0x28 as sched_clock source
>
> As they both have the same frequency, neither overrides the other, and
> whichever gets registered last is used as the sched_clock. As accesses to the
> architected timer are going to have a much lower overhead, this isn't very nice
> (and it could be better to use it even if it had a lower frequency).

Indeed. And if I look at it with my KVM hat on, it is even worse (the
guest will exit all the way to platform emulation in userspace on each
sched_clock read - a sure performance killer).

Of course, emulating a VE is not the best option, but that's all we have
so far when using QEMU as platform emulation.

M.
--
Jazz is not dead. It just smells funny...



\
 
 \ /
  Last update: 2013-03-21 13:21    [W:0.087 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site