Messages in this thread | | | From | Sebastian Gottschall <> | Subject | Re: Linux 3.8.4 | Date | Wed, 20 Mar 2013 23:25:13 +0100 |
| |
consider that this kernel is not compileable on mips targets due the patch in kernel/signal.c
SA_RESTORER is defined in mips, but sa_restorer does not exist on that platform
Am 20.03.2013 21:15, schrieb Greg KH: > I'm announcing the release of the 3.8.4 kernel. > > All users of the 3.8 kernel series must upgrade. > > The updated 3.8.y git tree can be found at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.8.y > and can be browsed at the normal kernel.org git web browser: > http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary > > thanks, > > greg k-h > > ------------ > > Documentation/devicetree/bindings/tty/serial/of-serial.txt | 3 > Makefile | 2 > arch/arm/mach-at91/board-foxg20.c | 1 > arch/arm/mach-at91/board-stamp9g20.c | 1 > arch/arm/mach-davinci/dma.c | 3 > arch/arm/mach-ixp4xx/vulcan-setup.c | 1 > arch/arm/mach-kirkwood/board-dt.c | 24 > arch/arm/mach-pxa/raumfeld.c | 1 > arch/powerpc/include/asm/mmu-hash64.h | 128 ++--- > arch/powerpc/kernel/cputable.c | 2 > arch/powerpc/kernel/exceptions-64s.S | 34 - > arch/powerpc/kvm/book3s_64_mmu_host.c | 4 > arch/powerpc/mm/hash_utils_64.c | 22 > arch/powerpc/mm/mmu_context_hash64.c | 11 > arch/powerpc/mm/pgtable_64.c | 2 > arch/powerpc/mm/slb_low.S | 50 - > arch/powerpc/mm/tlb_hash64.c | 2 > arch/s390/include/asm/tlbflush.h | 2 > arch/s390/kernel/entry.S | 3 > arch/s390/kernel/entry64.S | 5 > arch/x86/kernel/cpu/perf_event_intel_ds.c | 10 > arch/x86/power/cpu.c | 2 > drivers/block/loop.c | 24 > drivers/char/hw_random/virtio-rng.c | 13 > drivers/gpu/drm/i915/i915_dma.c | 23 > drivers/gpu/drm/i915/i915_drv.c | 13 > drivers/gpu/drm/i915/i915_drv.h | 1 > drivers/gpu/drm/i915/i915_irq.c | 4 > drivers/hwmon/lineage-pem.c | 2 > drivers/hwmon/pmbus/ltc2978.c | 14 > drivers/mtd/nand/nand_base.c | 16 > drivers/mtd/nand/nand_ids.c | 80 +-- > drivers/net/bonding/bond_main.c | 5 > drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 > drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 16 > drivers/net/macvlan.c | 1 > drivers/net/team/team.c | 2 > drivers/net/tun.c | 2 > drivers/net/vxlan.c | 9 > drivers/staging/comedi/drivers/dt9812.c | 16 > drivers/staging/vt6656/main_usb.c | 4 > drivers/tty/pty.c | 1 > drivers/tty/serial/8250/8250.c | 52 ++ > drivers/tty/serial/8250/8250_pci.c | 21 > drivers/tty/serial/8250/8250_pnp.c | 12 > drivers/tty/serial/Kconfig | 4 > drivers/tty/serial/of_serial.c | 6 > drivers/tty/tty_buffer.c | 2 > drivers/usb/class/cdc-wdm.c | 23 > drivers/usb/dwc3/core.c | 1 > drivers/usb/host/ehci-q.c | 18 > drivers/usb/serial/cp210x.c | 20 > drivers/usb/serial/option.c | 5 > drivers/usb/serial/qcaux.c | 1 > drivers/usb/serial/qcserial.c | 7 > drivers/usb/storage/initializers.c | 76 --- > drivers/usb/storage/initializers.h | 4 > drivers/usb/storage/unusual_devs.h | 329 ++++++++++++- > drivers/video/atmel_lcdfb.c | 22 > drivers/w1/masters/w1-gpio.c | 4 > drivers/w1/w1.c | 3 > drivers/xen/xen-pciback/pciback_ops.c | 3 > fs/block_dev.c | 4 > fs/btrfs/volumes.c | 6 > fs/ext3/super.c | 4 > include/linux/mtd/nand.h | 7 > include/linux/perf_event.h | 6 > include/uapi/linux/serial_core.h | 5 > include/video/atmel_lcdc.h | 1 > kernel/signal.c | 3 > net/bridge/br_mdb.c | 4 > net/core/dev.c | 1 > net/core/rtnetlink.c | 1 > net/dcb/dcbnl.c | 8 > net/ieee802154/6lowpan.h | 2 > net/ipv4/tcp_input.c | 6 > net/ipv6/ip6_input.c | 3 > net/ipv6/route.c | 3 > net/l2tp/l2tp_ppp.c | 1 > net/netlabel/netlabel_unlabeled.c | 27 - > net/rds/message.c | 3 > net/sctp/socket.c | 6 > scripts/Makefile.headersinst | 11 > security/selinux/xfrm.c | 2 > sound/core/seq/seq_timer.c | 8 > tools/usb/ffs-test.c | 2 > 86 files changed, 903 insertions(+), 395 deletions(-) > > Alan Stern (1): > USB: EHCI: don't check DMA values in QH overlays > > Amir Vadai (2): > net/mlx4_en: Initialize RFS filters lock and list in init_netdev > net/mlx4_en: Disable RFS when running in SRIOV mode > > Amit Shah (1): > virtio: rng: disallow multiple device registrations, fixes crashes > > Aneesh Kumar K.V (3): > powerpc: Make VSID_BITS* dependency explicit > powerpc: Update kernel VSID range > powerpc: Rename USER_ESID_BITS* to ESID_BITS* > > Axel Lin (1): > hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes > > Benjamin Herrenschmidt (2): > powerpc: Fix STAB initialization > powerpc: Fix cputable entry for 970MP rev 1.0 > > Bjørn Mork (2): > USB: option: add Huawei E5331 > USB: storage: fix Huawei mode switching regression > > Brian Norris (1): > mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY > > Christian Schmiedl (1): > USB: added support for Cinterion's products AH6 and PLS8 > > Cong Wang (1): > rds: limit the size allocated by rds_message_alloc() > > Cristian Bercaru (1): > bridging: fix rx_handlers return code > > Dan Carpenter (1): > selinux: use GFP_ATOMIC under spin_lock > > Dan Williams (2): > qcaux: add Franklin U600 > qcserial: bind to DM/DIAG port on Gobi 1K devices > > David Rientjes (1): > perf,x86: fix link failure for non-Intel configs > > Eric Dumazet (1): > tun: add a missing nf_reset() in tun_net_xmit() > > Eric Sandeen (1): > btrfs: use rcu_barrier() to wait for bdev puts at unmount > > Felipe Balbi (1): > usb: dwc3: core: don't forget to free coherent memory > > Greg Kroah-Hartman (3): > Revert "drm/i915: enable irqs earlier when resuming" > Revert "drm/i915: reorder setup sequence to have irqs for output setup" > Linux 3.8.4 > > Guenter Roeck (2): > hwmon: (pmbus/ltc2978) Fix temperature reporting > net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS > > Guillaume Nault (1): > l2tp: Restore socket refcount when sendmsg succeeds > > Guo Chao (3): > block: use i_size_write() in bd_set_size() > loopdev: fix a deadlock > loopdev: remove an user triggerable oops > > Hannes Frederic Sowa (1): > ipv6: stop multicast forwarding to process interface scoped addresses > > Heiko Carstens (1): > s390/mm: fix flush_tlb_kernel_range() > > Huang, Xiong (1): > atl1c: restore buffer state > > Ian Abbott (1): > staging: comedi: dt9812: use CR_CHAN() for channel number > > Jiri Slaby (2): > TTY: disable debugging warning > TTY: do not reset master's packet mode > > Johan Hovold (3): > ARM: w1-gpio: fix erroneous gpio requests > w1-gpio: remove erroneous __exit and __exit_p() > atmel_lcdfb: fix 16-bpp modes on older SOCs > > Josh Boyer (1): > serial: 8250: Keep 8250.<xxxx> module options functional after driver rename > > Kees Cook (1): > signal: always clear sa_restorer on execve > > Konrad Rzeszutek Wilk (1): > xen/pciback: Don't disable a PCI device that is already disabled. > > Lars-Peter Clausen (1): > ext3: Fix format string issues > > Ley Foon Tan (1): > tty/serial: Add support for Altera serial port > > Linus Torvalds (1): > perf,x86: fix wrmsr_on_cpu() warning on suspend/resume > > Lorenzo Colitti (1): > net: ipv6: Don't purge default router if accept_ra=2 > > Malcolm Priestley (1): > staging: vt6656: Fix oops on resume from suspend. > > Marcin Jurkowski (1): > w1: fix oops when w1_search is called from netlink connector > > Martin Schwidefsky (1): > s390: critical section cleanup vs. machine checks > > Mathias Krause (3): > bridge: fix mdb info leaks > rtnl: fix info leak on RTM_GETLINK request for VF devices > dcbnl: fix various netlink info leaks > > Matt Porter (1): > ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 > > Matwey V. Kornilov (1): > usb: cp210x new Vendor/Device IDs > > Maxin B. John (1): > tools: usb: ffs-test: Fix build failure > > Neal Cardwell (1): > tcp: fix double-counted receiver RTT when leaving receiver fast path > > Oliver Neukum (1): > USB: cdc-wdm: fix buffer overflow > > Paul Bolle (2): > tty: serial: fix typo "ARCH_S5P6450" > tty: serial: fix typo "SERIAL_S3C2412" > > Paul Moore (1): > netlabel: correctly list all the static label mappings > > Sam Ravnborg (1): > kbuild: fix make headers_check with make 3.80 > > Scott Ashcroft (1): > Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards > > Sean Young (1): > tty/8250_pnp: serial port detection regression since v3.7 > > Sebastian Hesselbarth (1): > ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels > > Stephane Eranian (1): > perf,x86: fix kernel crash with PEBS/BTS after suspend/resume > > Steve Conklin (1): > usb: serial: Add Rigblaster Advantage to device table > > Takashi Iwai (1): > ALSA: seq: Fix missing error handling in snd_seq_timer_open() > > Veaceslav Falico (1): > bonding: fire NETDEV_RELEASE event only on 0 slaves > > Vlad Yasevich (2): > team: unsyc the devices addresses when port is removed > macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode. > > Wang YanQing (1): > serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller > > YOSHIFUJI Hideaki (1): > 6lowpan: Fix endianness issue in is_addr_link_local(). > > Zang MingJie (1): > vxlan: fix oops when delete netns containing vxlan >
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |