lkml.org 
[lkml]   [2013]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: xhci: Fix TRB transfer length macro used for Event TRB.
On Wed, Mar 20, 2013 at 03:48:40PM +0530, Vivek Gautam wrote:
> Use proper macro while extracting TRB transfer length from
> Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23)
> for the same, and use it instead of TRB_LEN (bits 0:16) in
> case of event TRBs.

Thanks for the patch! Comments below.

> Signed-off-by: Vivek gautam <gautam.vivek@samsung.com>
> ---
> drivers/usb/host/xhci-ring.c | 45 +++++++++++++++++++++++------------------
> drivers/usb/host/xhci.h | 4 +++
> 2 files changed, 29 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 8828754..fe59a30 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -2027,8 +2027,8 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
> if (event_trb != ep_ring->dequeue &&
> event_trb != td->last_trb)
> td->urb->actual_length =
> - td->urb->transfer_buffer_length
> - - TRB_LEN(le32_to_cpu(event->transfer_len));
> + td->urb->transfer_buffer_length -
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));

This looks fine.

> else
> td->urb->actual_length = 0;
>
> @@ -2060,7 +2060,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
> /* Maybe the event was for the data stage? */
> td->urb->actual_length =
> td->urb->transfer_buffer_length -
> - TRB_LEN(le32_to_cpu(event->transfer_len));
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));

Fine

> xhci_dbg(xhci, "Waiting for status "
> "stage event\n");
> return 0;
> @@ -2096,7 +2096,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
> /* handle completion code */
> switch (trb_comp_code) {
> case COMP_SUCCESS:
> - if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
> + if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {

Fine

> frame->status = 0;
> break;
> }
> @@ -2137,11 +2137,13 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,

This bit of code is looping through the endpoint ring, and cur_trb
points to a transfer TRB on the endpoint ring. We're adding up the
transfer buffer lengths, up to the TRB that had a completion event.

> cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
> next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
> if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
> - !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
> - len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
> + !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) {
> + len += EVENT_TRB_LEN(le32_to_cpu
> + (cur_trb->generic.field[2]));
> + }

In this case, cur_trb points to a transfer TRB, not an event TRB. So
this instance still needs to use the TRB_LEN macro.

Adding the extra braces here makes it hard to review. Please don't add
extra braces, or do so in a second patch if it really bothers you.

> }
> - len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
> - TRB_LEN(le32_to_cpu(event->transfer_len));
> + len += EVENT_TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));

Here, cur_trb points to a transfer TRB, and event points to an event
TRB. So you need to use the TRB_LEN macro for the first line, and the
EVENT_TRB_LEN macro for the second line.

>
> if (trb_comp_code != COMP_STOP_INVAL) {
> frame->actual_length = len;
> @@ -2199,7 +2201,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
> case COMP_SUCCESS:
> /* Double check that the HW transferred everything. */
> if (event_trb != td->last_trb ||
> - TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {

Fine.

> xhci_warn(xhci, "WARN Successful completion "
> "on short TX\n");
> if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
> @@ -2225,20 +2227,21 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
> if (trb_comp_code == COMP_SHORT_TX)
> xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
> "%d bytes untransferred\n",
> - td->urb->ep->desc.bEndpointAddress,
> - td->urb->transfer_buffer_length,
> - TRB_LEN(le32_to_cpu(event->transfer_len)));
> + td->urb->ep->desc.bEndpointAddress,
> + td->urb->transfer_buffer_length,
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));

Please don't change indentation. I know it's a pain to keep lines
within 80 chars, but I would rather have a longer line than non-standard
indentation. The macro change is fine.

> /* Fast path - was this the last TRB in the TD for this URB? */
> if (event_trb == td->last_trb) {
> - if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
> + if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
> td->urb->actual_length =
> td->urb->transfer_buffer_length -
> - TRB_LEN(le32_to_cpu(event->transfer_len));
> + EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
> if (td->urb->transfer_buffer_length <
> td->urb->actual_length) {
> xhci_warn(xhci, "HC gave bad length "
> "of %d bytes left\n",
> - TRB_LEN(le32_to_cpu(event->transfer_len)));
> + EVENT_TRB_LEN(le32_to_cpu
> + (event->transfer_len)));

This chunk is fine.

> td->urb->actual_length = 0;
> if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
> *status = -EREMOTEIO;
> @@ -2270,17 +2273,19 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
> cur_trb != event_trb;
> next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
> if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
> - !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
> + !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) {
> td->urb->actual_length +=
> - TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
> + EVENT_TRB_LEN(le32_to_cpu
> + (cur_trb->generic.field[2]));
> + }

Again, this is walking the endpoint ring's transfer TRBs to add up the
transferred length, and thus those last two lines should still use the
TRB_LEN macro.

Also, don't add extra braces to one-line blocks. And why was the
indentation on the curly braces so odd? Please only use tabs.

> }
> /* If the ring didn't stop on a Link or No-op TRB, add
> * in the actual bytes transferred from the Normal TRB
> */
> if (trb_comp_code != COMP_STOP_INVAL)
> td->urb->actual_length +=
> - TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
> - TRB_LEN(le32_to_cpu(event->transfer_len));
> + EVENT_TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]))
> + - EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));

cur_trb needs to use the TRB_LEN, and event needs to use the
EVENT_TRB_LEN macro.

> }
>
> return finish_td(xhci, td, event_trb, event, ep, status, false);
> @@ -2368,7 +2373,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
> * transfer type
> */
> case COMP_SUCCESS:
> - if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
> + if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)

Fine.

> break;
> if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
> trb_comp_code = COMP_SHORT_TX;
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index f791bd0..61f71ed 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -972,6 +972,10 @@ struct xhci_transfer_event {
> __le32 flags;
> };
>
> +/* Transfer event TRB length bit mask */
> +/* bits 0:23 */
> +#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
> +
> /** Transfer Event bit fields **/
> #define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
>
> --
> 1.7.6.5
>

Can you correct these and resubmit? Thanks!

Sarah Sharp


\
 
 \ /
  Last update: 2013-03-20 19:41    [W:0.054 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site