lkml.org 
[lkml]   [2013]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] x86: let userspace inject interrupts into the local APIC
Il 19/03/2013 19:50, Gleb Natapov ha scritto:
> On Tue, Mar 19, 2013 at 07:39:24PM +0100, Paolo Bonzini wrote:
>> Il 19/03/2013 19:13, Gleb Natapov ha scritto:
>>>>> There is no way for userspace to inject interrupts into a VCPU's
>>>>> local APIC, which is important in order to inject INITs coming from
>>>>> the chipset. KVM_INTERRUPT is currently disabled when the in-kernel
>>>>> local APIC is used, so we can repurpose it. The shorthand destination
>>>>> field must contain APIC_DEST_SELF, which has a double effect: first,
>>>>> the ICR2 register is not used and the 32-bit field of KVM_INTERRUPT is
>>>>> enough; second, it ensures that the valid range of the irq field is
>>>>> distinct in the userspace-APIC and kernel-APIC cases.
>>>>>
>>> Init coming from triggering INIT# line should not be modeled as INIT coming from
>>> APIC.
>>
>> Then Jan's patch was wrong, and INIT should not have been an apic event
>> (perhaps SIPI should).
>>
> If it goes through APIC it is.

Ok, I'll extract KVM_APIC_INIT handling into a separate function and
call it synchronously from KVM_INTERRUPT, with irq = -1
(KVM_INTERRUPT_INIT, similar to PPC's values of irq).
KVM_INTERRUPT_INIT will be accessible even with in-kernel irqchip.

>>> In fact INIT cannot be send using SELF shorthand.
>>
>> Where does the SDM say that?
>>
> Table 10-3.

Yeah, table 10-6 and 10-7 here.

Paolo



\
 
 \ /
  Last update: 2013-03-19 22:02    [W:0.054 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site