Messages in this thread | | | From | Naveen Krishna Ch <> | Date | Fri, 15 Mar 2013 21:12:22 +0530 | Subject | Re: [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow |
| |
On 15 March 2013 15:54, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: > Doug, > > On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote: >> Hook up the exynos5250-snow thermistors via the device tree now that >> there's a driver available to use them. >> >> Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> used these changes to test on snow before submitting the ADC and NTC driver changes. >> --- >> Changes in v2: >> - Match 'uV' -> 'uv' change in Naveen's bindings. >> >> arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ >> arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ >> 2 files changed, 35 insertions(+) >> >> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi >> index 46c0980..f7cc835 100644 >> --- a/arch/arm/boot/dts/cros5250-common.dtsi >> +++ b/arch/arm/boot/dts/cros5250-common.dtsi >> @@ -167,6 +167,10 @@ >> status = "disabled"; >> }; >> >> + adc@12D10000 { >> + vdd-supply = <&buck5_reg>; >> + }; >> + >> hdmi { >> hpd-gpio = <&gpx3 7 0xf 1 3>; >> }; >> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts >> index 17dd951..b78da7c 100644 >> --- a/arch/arm/boot/dts/exynos5250-snow.dts >> +++ b/arch/arm/boot/dts/exynos5250-snow.dts >> @@ -40,4 +40,35 @@ >> <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; >> }; >> }; >> + >> + adc@12D10000 { >> + ncp15wb473@3 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 3>; >> + }; >> + ncp15wb473@4 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 4>; >> + }; >> + ncp15wb473@5 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 5>; >> + }; >> + ncp15wb473@6 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 6>; >> + }; >> + }; >> }; > Thanks for the upload, i've tested with a similar changes. >> -- >> 1.8.1.3 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > > > -- > Shine bright, > (: Nav :)
-- Shine bright, (: Nav :)
| |