lkml.org 
[lkml]   [2013]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)
On Fri, 15 Mar 2013, Jiri Kosina wrote:

> Attaching dmesg.txt from the machine with 28c70f162a as head, with
> drm.debug=0xe.

OK, now actually attaching it, sorry.

--
Jiri Kosina
SUSE Labs[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-rc4-00382-g28c70f1 (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #214 SMP Fri Mar 15 11:58:58 CET 2013
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal drm.debug=0xe
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7c9fffff]
[ 0.000000] [mem 0x00000000-0x7c9fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x7c9fffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x36b31000-0x37feffff]
[ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000007c97bdcc 0009C (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007c97bf00 000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: DSDT 000000007c97c2f4 0D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007c98e000 00040
[ 0.000000] ACPI: SSDT 000000007c97c0b4 00240 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: ECDT 000000007c989b7d 00052 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: APIC 000000007c989bcf 00078 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: MCFG 000000007c989c47 0003C (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: HPET 000000007c989c83 00038 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: SLIC 000000007c989dc2 00176 (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007c989f38 00028 (v01 LENOVO TP-6D 00002020 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000007c989f60 000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001)
[ 0.000000] ACPI: SSDT 000000007c98d203 0055F (v01 LENOVO TP-6D 00002020 INTL 20050513)
[ 0.000000] ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff]
[ 0.000000] NODE_DATA [mem 0x7c6b2000-0x7c6c5fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff]
[ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff]
[ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff]
[ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff]
[ 0.000000] On node 0 totalpages: 509431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6923 pages used for memmap
[ 0.000000] DMA32 zone: 498526 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000
[ 0.000000] PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000
[ 0.000000] PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000
[ 0.000000] PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000
[ 0.000000] PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000
[ 0.000000] PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000
[ 0.000000] PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000
[ 0.000000] PM: Registered nosave memory: 000000007c6df000 - 000000007c706000
[ 0.000000] PM: Registered nosave memory: 000000007c706000 - 000000007c708000
[ 0.000000] PM: Registered nosave memory: 000000007c708000 - 000000007c90f000
[ 0.000000] PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000
[ 0.000000] PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000
[ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007c200000 s80512 r8192 d21888 u524288
[ 0.000000] pcpu-alloc: s80512 r8192 d21888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal drm.debug=0xe
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1973036k/2041856k available (5288k kernel code, 4132k absent, 64688k reserved, 5599k data, 1096k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] kmemleak: Early log buffer exceeded (514), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.033 MHz processor
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=7448132)
[ 0.004158] pid_max: default: 32768 minimum: 301
[ 0.004391] Security Framework initialized
[ 0.004771] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006054] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006681] Mount-cache hash table entries: 256
[ 0.007248] Initializing cgroup subsys cpuacct
[ 0.007324] Initializing cgroup subsys devices
[ 0.007400] Initializing cgroup subsys freezer
[ 0.007475] Initializing cgroup subsys net_cls
[ 0.007550] Initializing cgroup subsys blkio
[ 0.007625] Initializing cgroup subsys perf_event
[ 0.008028] Disabled fast string operations
[ 0.008107] CPU: Physical Processor ID: 0
[ 0.008182] CPU: Processor Core ID: 0
[ 0.008256] mce: CPU supports 6 MCE banks
[ 0.008338] CPU0: Thermal monitoring enabled (TM2)
[ 0.008414] process: using mwait in idle threads
[ 0.008494] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.008494] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.008494] tlb_flushall_shift: -1
[ 0.008718] Freeing SMP alternatives: 20k freed
[ 0.009680] ACPI: Core revision 20120913
[ 0.028563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068946] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06)
[ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.072000] ... version: 2
[ 0.072000] ... bit width: 40
[ 0.072000] ... generic registers: 2
[ 0.072000] ... value mask: 000000ffffffffff
[ 0.072000] ... max period: 000000007fffffff
[ 0.072000] ... fixed-purpose events: 3
[ 0.072000] ... event mask: 0000000700000003
[ 0.008000] Disabled fast string operations
[ 0.072000] smpboot: Booting Node 0, Processors #1
[ 0.084026] Brought up 2 CPUs
[ 0.084246] smpboot: Total of 2 processors activated (7448.13 BogoMIPS)
[ 0.088758] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089052] devtmpfs: initialized
[ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes)
[ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes)
[ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes)
[ 0.094755] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes)
[ 0.094755] regulator-dummy: no parameters
[ 0.094755] RTC time: 13:19:30, date: 03/15/13
[ 0.094755] NET: Registered protocol family 16
[ 0.096136] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.096244] ACPI: bus type pci registered
[ 0.096419] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.096529] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.106524] PCI: Using configuration type 1 for base access
[ 0.109028] bio: create slab <bio-0> at 0
[ 0.109028] ACPI: Added _OSI(Module Device)
[ 0.109028] ACPI: Added _OSI(Processor Device)
[ 0.109028] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109028] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113670] ACPI: EC: EC description table is found, configuring boot EC
[ 0.128012] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.138509] ACPI: SSDT 000000007c6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.139567] ACPI: Dynamic OEM Table Load:
[ 0.139725] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.140450] ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.141596] ACPI: Dynamic OEM Table Load:
[ 0.141754] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.156726] ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.157838] ACPI: Dynamic OEM Table Load:
[ 0.157996] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.158200] ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.158200] ACPI: Dynamic OEM Table Load:
[ 0.158200] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.172343] ACPI: Interpreter enabled
[ 0.172420] ACPI: (supports S0 S3 S4 S5)
[ 0.172696] ACPI: Using IOAPIC for interrupt routing
[ 0.188364] ACPI: Power Resource [PUBS] (on)
[ 0.193445] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.197034] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.197115] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.197713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197844] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.198029] PCI host bridge to bus 0000:00
[ 0.198106] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198184] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.198261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.198339] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.198418] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.198497] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.198575] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff]
[ 0.198672] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.198734] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.198749] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.198758] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.198765] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.198820] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.198832] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit]
[ 0.200046] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.200061] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit]
[ 0.200108] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.200137] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
[ 0.200150] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f]
[ 0.200157] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f]
[ 0.200164] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827]
[ 0.200171] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b]
[ 0.200178] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f]
[ 0.200236] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[ 0.200248] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837]
[ 0.200255] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff]
[ 0.200375] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.200402] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
[ 0.200415] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff]
[ 0.200427] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.200524] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.200565] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.200626] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.200712] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.200773] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.200858] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.200920] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.201018] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.201046] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff]
[ 0.201166] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.201215] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.201238] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.201344] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201393] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.201503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201550] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.201660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.201709] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.201819] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.201872] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.201933] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.202019] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.202080] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.202165] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.202226] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.202323] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.202351] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff]
[ 0.202471] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.202513] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.202623] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.202812] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.202842] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.202855] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.202867] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.202879] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.202892] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.202904] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff]
[ 0.202980] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.203020] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.203043] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit]
[ 0.203075] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.203182] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.203425] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
[ 0.203486] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit]
[ 0.203720] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.203851] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.203934] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.204017] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.204097] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.204102] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.204111] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.204214] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.204305] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.204308] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.204311] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.204314] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.204316] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.204319] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode)
[ 0.204349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.204679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.204764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.204853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.205448] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.206339] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.219041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.219703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.220363] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.221023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.221681] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.222342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.223000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.223658] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.224288] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224288] vgaarb: loaded
[ 0.224288] vgaarb: bridge control possible 0000:00:02.0
[ 0.224636] SCSI subsystem initialized
[ 0.224712] ACPI: bus type scsi registered
[ 0.224795] libata version 3.00 loaded.
[ 0.224795] PCI: Using ACPI for IRQ routing
[ 0.226892] PCI: pci_cache_line_size set to 64 bytes
[ 0.226988] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.226992] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff]
[ 0.226996] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff]
[ 0.226999] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff]
[ 0.227003] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff]
[ 0.228107] NetLabel: Initializing
[ 0.228182] NetLabel: domain hash size = 128
[ 0.228256] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.228389] NetLabel: unlabeled traffic allowed by default
[ 0.228488] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.228571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.228855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.230939] Switching to clocksource hpet
[ 0.236958] pnp: PnP ACPI init
[ 0.237054] ACPI: bus type pnp registered
[ 0.258555] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.258558] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.258562] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.258565] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.258567] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.258570] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.258573] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.258576] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.258579] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.258581] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.258584] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.258590] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.258593] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.258596] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.258599] pnp 00:00: [mem 0x00100000-0x7effffff]
[ 0.258601] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.258604] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.258690] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.258771] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.258851] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.258931] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.259009] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.259089] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.259168] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.259248] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.259328] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.259407] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.259487] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.259566] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.259646] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved
[ 0.259727] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.259806] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.259887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.259928] pnp 00:01: [bus 00-ff]
[ 0.259931] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.259934] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.259937] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.259940] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.259943] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.259946] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.259949] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.259952] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.259955] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.259958] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.259961] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.259964] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.259967] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.259970] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.259973] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.259975] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.259978] pnp 00:01: [mem 0x7f000000-0xfebfffff window]
[ 0.259981] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.260054] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.280506] pnp 00:02: [io 0x0010-0x001f]
[ 0.280510] pnp 00:02: [io 0x0090-0x009f]
[ 0.280512] pnp 00:02: [io 0x0024-0x0025]
[ 0.280515] pnp 00:02: [io 0x0028-0x0029]
[ 0.280518] pnp 00:02: [io 0x002c-0x002d]
[ 0.280520] pnp 00:02: [io 0x0030-0x0031]
[ 0.280523] pnp 00:02: [io 0x0034-0x0035]
[ 0.280525] pnp 00:02: [io 0x0038-0x0039]
[ 0.280528] pnp 00:02: [io 0x003c-0x003d]
[ 0.280531] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.280533] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.280536] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.280538] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.280541] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.280543] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.280546] pnp 00:02: [io 0x0050-0x0053]
[ 0.280549] pnp 00:02: [io 0x0072-0x0077]
[ 0.280552] pnp 00:02: [io 0x164e-0x164f]
[ 0.280554] pnp 00:02: [io 0x002e-0x002f]
[ 0.280557] pnp 00:02: [io 0x1000-0x107f]
[ 0.280560] pnp 00:02: [io 0x1180-0x11ff]
[ 0.280562] pnp 00:02: [io 0x0800-0x080f]
[ 0.280565] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.280567] pnp 00:02: [io 0x1600-0x1641]
[ 0.280570] pnp 00:02: [io 0x1600-0x161b]
[ 0.280575] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.280578] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.280581] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.280584] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.280586] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.280589] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.280696] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.280776] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.280858] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.280937] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.281015] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.281093] system 00:02: [io 0x1600-0x1641] has been reserved
[ 0.281171] system 00:02: [io 0x1600-0x161b] has been reserved
[ 0.281250] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.281329] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.281409] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.281489] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.281571] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.281650] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.281731] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281814] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.281869] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.281889] pnp 00:04: [io 0x0000-0x000f]
[ 0.281893] pnp 00:04: [io 0x0080-0x008f]
[ 0.281895] pnp 00:04: [io 0x00c0-0x00df]
[ 0.281898] pnp 00:04: [dma 4]
[ 0.281946] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.281965] pnp 00:05: [io 0x0061]
[ 0.282017] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.282036] pnp 00:06: [io 0x00f0]
[ 0.282048] pnp 00:06: [irq 13]
[ 0.282100] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.282121] pnp 00:07: [io 0x0070-0x0071]
[ 0.282128] pnp 00:07: [irq 8]
[ 0.282177] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.282198] pnp 00:08: [io 0x0060]
[ 0.282201] pnp 00:08: [io 0x0064]
[ 0.282208] pnp 00:08: [irq 1]
[ 0.282260] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.282288] pnp 00:09: [irq 12]
[ 0.282342] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.302840] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.302895] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.303574] pnp: PnP ACPI: found 11 devices
[ 0.303650] ACPI: ACPI bus type pnp unregistered
[ 0.313359] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.313364] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.313368] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.313381] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.313385] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.313417] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.313420] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.313423] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.313426] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.313429] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.313435] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff]
[ 0.313516] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.313623] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.313731] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.313810] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.313891] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.313969] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.314051] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff]
[ 0.314132] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.314245] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.314322] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.314404] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.314485] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.314598] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.314675] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.314757] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.314838] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.314950] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.315085] pci 0000:00:1e.0: setting latency timer to 64
[ 0.315089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.315092] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.315094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315097] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.315100] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.315102] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.315105] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.315107] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 0.315110] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.315112] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.315115] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.315117] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.315120] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.315122] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.315125] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.315127] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.315130] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.315132] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.315135] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.315137] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.315140] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.315284] NET: Registered protocol family 2
[ 0.316103] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.317942] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.318892] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.319364] TCP: reno registered
[ 0.319458] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.319595] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.319924] NET: Registered protocol family 1
[ 0.320056] pci 0000:00:02.0: Boot video device
[ 0.320086] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.320221] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.320390] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.320609] PCI: CLS 64 bytes, default 64
[ 0.320891] Unpacking initramfs...
[ 0.866617] Freeing initrd memory: 21244k freed
[ 0.877872] Simple Boot Flag at 0x35 set to 0x1
[ 0.878861] audit: initializing netlink socket (disabled)
[ 0.878963] type=2000 audit(1363353570.876:1): initialized
[ 0.910213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.910953] VFS: Disk quotas dquot_6.5.2
[ 0.911079] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.911758] msgmni has been set to 3895
[ 0.912422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.912587] io scheduler noop registered
[ 0.913223] io scheduler deadline registered
[ 0.913334] io scheduler cfq registered (default)
[ 0.914765] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.915017] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.915271] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.915536] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.915620] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.915662] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.915742] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.915824] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.915868] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.915952] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.916205] intel_idle: does not run on family 6 model 23
[ 0.960349] GHES: HEST is not enabled!
[ 0.960512] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 0.983394] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A
[ 0.983835] Non-volatile memory driver v1.3
[ 0.983911] Linux agpgart interface v0.103
[ 0.984140] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.984336] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.986765] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.987024] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.987342] ahci 0000:00:1f.2: version 3.0
[ 0.987414] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.987609] ahci: SSS flag set, parallel bus scan disabled
[ 0.987712] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.987821] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.987931] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.988956] scsi0 : ahci
[ 0.989233] scsi1 : ahci
[ 0.989461] scsi2 : ahci
[ 0.989700] scsi3 : ahci
[ 0.989878] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43
[ 0.989985] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43
[ 0.990090] ata3: DUMMY
[ 0.990162] ata4: DUMMY
[ 0.990422] libphy: Fixed MDIO Bus: probed
[ 0.990497] PPP generic driver version 2.4.2
[ 0.990701] PPP BSD Compression module registered
[ 0.990780] PPP Deflate Compression module registered
[ 0.990861] PPP MPPE Compression module registered
[ 0.990936] NET: Registered protocol family 24
[ 0.991110] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.003072] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.003154] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.003421] mousedev: PS/2 mouse device common for all mice
[ 1.003636] rtc_cmos 00:07: RTC can wake from S4
[ 1.003933] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.004060] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.004158] cpuidle: using governor ladder
[ 1.004232] cpuidle: using governor menu
[ 1.004307] EFI Variables Facility v0.08 2004-May-17
[ 1.004560] TCP: cubic registered
[ 1.004739] NET: Registered protocol family 10
[ 1.005681] PM: Checking hibernation image partition /dev/sda1
[ 1.008608] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.312027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.313002] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.313006] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.313113] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.313441] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
[ 1.313521] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.313636] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.314371] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.314375] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.314481] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.314844] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.314848] ata1.00: configured for UDMA/133
[ 1.315117] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.315635] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.315868] sd 0:0:0:0: [sda] Write Protect is off
[ 1.315962] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.316018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.316997] sda: sda1 sda2
[ 1.317570] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.543066] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.560527] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
[ 1.632028] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.632175] PM: Hibernation image partition 8:1 present
[ 1.632177] PM: Looking for hibernation image.
[ 1.644336] PM: Image not found (code -22)
[ 1.644339] PM: Hibernation image not present or could not be loaded.
[ 1.644374] registered taskstats version 1
[ 1.645107] Magic number: 5:756:331
[ 1.645247] tty tty52: hash matches
[ 1.645453] rtc_cmos 00:07: setting system clock to 2013-03-15 13:19:32 UTC (1363353572)
[ 1.648124] Freeing unused kernel memory: 1096k freed
[ 1.648508] Write protecting the kernel read-only data: 10240k
[ 1.651682] Freeing unused kernel memory: 844k freed
[ 1.658287] Freeing unused kernel memory: 1704k freed
[ 1.700272] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.700354] ACPI: Thermal Zone [THM0] (53 C)
[ 1.705438] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.705516] ACPI: Thermal Zone [THM1] (51 C)
[ 1.708230] ata_generic 0000:00:03.2: setting latency timer to 64
[ 1.708860] scsi4 : ata_generic
[ 1.709093] scsi5 : ata_generic
[ 1.709285] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 1.709364] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 1.876018] tsc: Refined TSC clocksource calibration: 1861.999 MHz
[ 1.876098] Switching to clocksource tsc
[ 2.044113] ACPI: Requesting acpi_cpufreq
[ 2.049923] Monitor-Mwait will be used to enter C-1 state
[ 2.049936] Monitor-Mwait will be used to enter C-2 state
[ 2.049945] Monitor-Mwait will be used to enter C-3 state
[ 2.049952] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.050044] ACPI: acpi_idle registered with cpuidle
[ 2.050332] Switching to clocksource hpet
[ 2.107518] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.114858] udevd[99]: starting version 173
[ 2.151983] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.174268] ACPI: bus type usb registered
[ 2.174424] usbcore: registered new interface driver usbfs
[ 2.174534] usbcore: registered new interface driver hub
[ 2.184086] ACPI: Lid Switch [LID]
[ 2.184278] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.184482] ACPI: Sleep Button [SLPB]
[ 2.184679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.184868] ACPI: Power Button [PWRF]
[ 2.195191] [drm] Initialized drm 1.1.0 20060810
[ 2.223938] usbcore: registered new device driver usb
[ 1.315890] ACPI: Invalid Power Resource to register!
[ 2.239383] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,has_bsd_ring,
[ 2.239485] i915 0000:00:02.0: setting latency timer to 64
[ 2.276601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.292378] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7c98b1f3
[ 2.292403] [drm:intel_opregion_setup], Public ACPI methods supported
[ 2.292405] [drm:intel_opregion_setup], SWSCI supported
[ 2.292407] [drm:intel_opregion_setup], ASLE supported
[ 2.292477] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.292493] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.292573] [drm] Driver supports precise vblank timestamp query.
[ 2.292652] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 2.292656] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 2.292659] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0
[ 2.292663] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 2.292668] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 2.292671] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x8 0xa
[ 2.292675] [drm:parse_lfp_panel_data], VBT initial LVDS value 42300300
[ 2.292679] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 2.292681] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 2.292685] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 2.292701] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 2.292774] [drm:intel_modeset_init], 2 display pipes available.
[ 2.292791] [drm:intel_modeset_init], plane 0 init failed: -19
[ 2.292804] [drm:intel_modeset_init], plane 1 init failed: -19
[ 2.292806] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
[ 2.292811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.293661] [drm:i965_irq_handler], pipe B underrun
[ 2.293666] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.300774] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.301137] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.301501] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.301866] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.302232] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.302971] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.303335] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.303700] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.304072] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.304437] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.304802] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.305166] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.305531] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.305896] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.306261] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.306625] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.306990] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.307355] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.307720] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.308092] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.308457] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.308821] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.309186] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.309550] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.309915] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.310281] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.310645] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.311010] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.311375] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.311740] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.312111] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.320082] [drm:intel_lvds_init], using preferred mode from EDID:
[ 2.320087] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 2.320176] [drm:intel_lvds_init], detected single-link lvds configuration
[ 2.320269] [drm:intel_panel_get_backlight], get backlight PWM = 3211215
[ 2.320323] [drm:intel_panel_get_backlight], get backlight PWM = 3211215
[ 2.320401] [drm:intel_setup_outputs], probing SDVOB
[ 2.320409] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 2.340786] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 2.340790] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 2.346953] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 2.346959] [drm:intel_setup_outputs], probing HDMI on SDVOB
[ 2.347061] [drm:intel_setup_outputs], probing DP_B
[ 2.347141] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 2.349638] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.349641] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.352135] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.352137] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.352192] [drm:intel_setup_outputs], probing SDVOC
[ 2.352203] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 2.376901] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 2.376905] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[ 2.376955] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 2.376960] [drm:intel_setup_outputs], probing HDMI on SDVOC
[ 2.377058] [drm:intel_setup_outputs], probing DP_C
[ 2.377152] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 2.379640] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.379643] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.382137] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.382139] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.382191] [drm:intel_setup_outputs], probing DP_D
[ 2.382270] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 2.384765] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.384767] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.387255] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
[ 2.387257] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 2.387311] [drm:intel_tv_init], Integrated TV is not present.
[ 2.387317] [drm:i915_gem_init_global_gtt], clearing unused GTT space: [0, 7ffff000]
[ 2.390290] [drm:init_status_page], render ring hws offset: 0x00001000
[ 2.390506] [drm:init_status_page], bsd ring hws offset: 0x00024000
[ 2.390688] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled
[ 2.390691] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled
[ 2.390695] [drm:intel_modeset_setup_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[ 2.390698] [drm:intel_modeset_setup_hw_state], [ENCODER:13:DAC-13] hw state readout: disabled, pipe=0
[ 2.390701] [drm:intel_modeset_setup_hw_state], [ENCODER:14:TMDS-14] hw state readout: disabled, pipe=0
[ 2.390704] [drm:intel_modeset_setup_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe=0
[ 2.390707] [drm:intel_modeset_setup_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0
[ 2.390710] [drm:intel_modeset_setup_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0
[ 2.390713] [drm:intel_modeset_setup_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0
[ 2.390717] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 2.390720] [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:VGA-1] hw state readout: disabled
[ 2.390723] [drm:intel_modeset_setup_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
[ 2.390725] [drm:intel_modeset_setup_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled
[ 2.390728] [drm:intel_modeset_setup_hw_state], [CONNECTOR:21:HDMI-A-2] hw state readout: disabled
[ 2.390731] [drm:intel_modeset_setup_hw_state], [CONNECTOR:23:DP-2] hw state readout: disabled
[ 2.390734] [drm:intel_modeset_setup_hw_state], [CONNECTOR:25:DP-3] hw state readout: disabled
[ 2.390739] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 2.390743] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
[ 2.390746] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13]
[ 2.390748] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14]
[ 2.390751] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18]
[ 2.390754] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20]
[ 2.390756] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22]
[ 2.390758] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24]
[ 2.390761] [drm:intel_modeset_check_state], [CRTC:3]
[ 2.390763] [drm:intel_modeset_check_state], [CRTC:4]
[ 2.390777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 2.390794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 2.390796] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 2.390801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 2.402390] [drm:intel_crt_detect], CRT detected via hotplug
[ 2.402536] [drm:gmbus_irq_handler], GMBUS interrupt
[ 2.403651] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 2.403656] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.403658] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.403660] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.403917] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 2.403919] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.460113] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 2.460120] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 2.460124] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.460127] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 2.484714] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 2.484716] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 2.484731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[ 2.484734] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.484738] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.484741] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 2.484745] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 2.484748] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 2.484752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 2.484755] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 2.484758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 2.484761] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2.484763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 2.484766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
[ 2.484768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
[ 2.484770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2]
[ 2.484772] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2.484774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected
[ 2.484777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3]
[ 2.484779] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2.484781] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected
[ 2.484783] [drm:drm_setup_crtcs],
[ 2.484786] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 2.484788] [drm:drm_enable_connectors], connector 12 enabled? yes
[ 2.484789] [drm:drm_enable_connectors], connector 15 enabled? no
[ 2.484791] [drm:drm_enable_connectors], connector 19 enabled? no
[ 2.484793] [drm:drm_enable_connectors], connector 21 enabled? no
[ 2.484795] [drm:drm_enable_connectors], connector 23 enabled? no
[ 2.484796] [drm:drm_enable_connectors], connector 25 enabled? no
[ 2.484798] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 2.484800] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 2.484803] [drm:drm_target_preferred], found mode 1440x900
[ 2.484804] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[ 2.484806] [drm:drm_target_preferred], looking for preferred mode on connector 12
[ 2.484808] [drm:drm_target_preferred], found mode 1024x768
[ 2.484810] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 2.484816] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3
[ 2.484819] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[ 2.490633] [drm:intelfb_create], allocated 1440x900 fb: 0x00046000, bo ffff880036b5b6c0
[ 2.490842] fbcon: inteldrmfb (fb0) is primary device
[ 2.491660] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 2.491669] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 2.491671] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 2.491674] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 2.491676] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 2.491680] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 2.491681] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 2.491682] [drm:intel_crtc_set_config], attempting to set mode from userspace
[ 2.491684] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 2.491687] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 2
[ 2.491689] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 2.491691] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 2.491699] [drm:intel_opregion_asle_intr], non asle set request??
[ 2.792104] [drm:intel_update_fbc], no output, disabling
[ 2.792108] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
[ 2.792116] [drm:intel_modeset_adjusted_mode], [CRTC:3]
[ 2.792121] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
[ 2.792454] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[ 2.792457] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 2.792458] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
[ 2.816109] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760
[ 2.816111] [drm:intel_update_fbc], fbc set to per-chip default
[ 2.816113] [drm:intel_update_fbc], fbc disabled per module param
[ 2.816116] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6
[ 2.816119] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6
[ 2.816122] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:30:1440x900]
[ 2.816124] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6
[ 2.816127] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6
[ 2.840135] [drm:intel_update_fbc], fbc set to per-chip default
[ 2.840136] [drm:intel_update_fbc], fbc disabled per module param
[ 2.840139] [drm:intel_enable_lvds], applying panel-fitter: 0, 0
[ 3.048104] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 3.048107] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.048113] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.048115] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 3.048120] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
[ 3.048123] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13]
[ 3.048126] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14]
[ 3.048128] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18]
[ 3.048130] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20]
[ 3.048132] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22]
[ 3.048134] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24]
[ 3.048135] [drm:intel_modeset_check_state], [CRTC:3]
[ 3.048137] [drm:intel_modeset_check_state], [CRTC:4]
[ 3.048140] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 3.048144] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 3.048145] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 3.048148] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.048152] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.048154] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 3.048156] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.048158] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 3.048159] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 3.048161] [drm:intel_crtc_set_config], attempting to set mode from userspace
[ 3.048164] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.048166] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 3.048172] [drm:intel_modeset_adjusted_mode], [CRTC:4]
[ 3.048513] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[ 3.048515] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.048516] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
[ 3.072104] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760
[ 3.072106] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 3.072109] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=23, cursor=6, SR: plane=0, cursor=0
[ 3.072112] [drm:intel_crtc_mode_set], [ENCODER:13:DAC-13] set [MODE:31:1024x768]
[ 3.072116] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=23, cursor=6, SR: plane=0, cursor=0
[ 3.088133] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 3.088139] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 3.088142] [drm:intel_connector_check_state], [CONNECTOR:12:VGA-1]
[ 3.088145] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
[ 3.088147] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13]
[ 3.088149] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14]
[ 3.088152] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18]
[ 3.088154] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20]
[ 3.088156] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22]
[ 3.088158] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24]
[ 3.088159] [drm:intel_modeset_check_state], [CRTC:3]
[ 3.088161] [drm:intel_modeset_check_state], [CRTC:4]
[ 3.088230] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 3.088234] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.088236] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 3.088239] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 3.088242] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.088244] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 3.090453] Console: switching to colour frame buffer device 128x48
[ 3.090457] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 3.090460] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.090461] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 3.090464] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 3.090466] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.090467] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 3.092784] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.092815] i915 0000:00:02.0: registered panic notifier
[ 3.095267] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.095647] [drm:asle_set_backlight], bclp = 0x800000ff
[ 3.095651] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.095653] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 3.095656] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.095662] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.097814] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.098155] [drm:asle_set_backlight], bclp = 0x800000ff
[ 3.098158] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.098160] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 3.098162] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.098166] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.099345] acpi device:02: registered as cooling_device2
[ 3.099523] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.099652] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.100414] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.100523] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.100529] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.100571] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.104567] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.104603] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 3.104644] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 3.116027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.116129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.116168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.116210] usb usb1: Product: EHCI Host Controller
[ 3.116239] usb usb1: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 ehci_hcd
[ 3.116277] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.116566] hub 1-0:1.0: USB hub found
[ 3.116602] hub 1-0:1.0: 6 ports detected
[ 3.117199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.117204] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.117246] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.121227] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.121258] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.121289] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 3.132101] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.133352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.134534] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.135732] usb usb2: Product: EHCI Host Controller
[ 3.136946] usb usb2: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 ehci_hcd
[ 3.138168] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.139627] hub 2-0:1.0: USB hub found
[ 3.140872] hub 2-0:1.0: 6 ports detected
[ 3.145458] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.146842] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.146847] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.148163] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.149452] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.150697] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.151873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.153055] usb usb3: Product: UHCI Host Controller
[ 3.154353] usb usb3: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.155609] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.157179] hub 3-0:1.0: USB hub found
[ 3.158413] hub 3-0:1.0: 2 ports detected
[ 3.159772] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.159778] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.161057] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.162240] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.163415] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.164519] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.165634] usb usb4: Product: UHCI Host Controller
[ 3.166711] usb usb4: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.167803] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.169119] hub 4-0:1.0: USB hub found
[ 3.170219] hub 4-0:1.0: 2 ports detected
[ 3.171441] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.171445] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.172557] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.173655] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 3.174751] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.175787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.176845] usb usb5: Product: UHCI Host Controller
[ 3.177921] usb usb5: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.178982] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.180325] hub 5-0:1.0: USB hub found
[ 3.181402] hub 5-0:1.0: 2 ports detected
[ 3.182637] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.182642] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.183696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.184857] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 3.186019] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.187096] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.188230] usb usb6: Product: UHCI Host Controller
[ 3.189315] usb usb6: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.190409] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.191782] hub 6-0:1.0: USB hub found
[ 3.192923] hub 6-0:1.0: 2 ports detected
[ 3.194197] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.194202] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.195370] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.196573] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 3.197877] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.199057] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.200255] usb usb7: Product: UHCI Host Controller
[ 3.201433] usb usb7: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.202571] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.203946] hub 7-0:1.0: USB hub found
[ 3.205122] hub 7-0:1.0: 2 ports detected
[ 3.206387] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.206393] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.207547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.208740] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 3.209908] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.210982] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.212095] usb usb8: Product: UHCI Host Controller
[ 3.213163] usb usb8: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd
[ 3.214267] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.215641] hub 8-0:1.0: USB hub found
[ 3.216780] hub 8-0:1.0: 2 ports detected
[ 3.326859] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 3.326869] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff]
[ 3.326871] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff]
[ 3.326875] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff]
[ 3.326905] PM: Basic memory bitmaps created
[ 3.339699] PM: Basic memory bitmaps freed
[ 3.339710] video LNXVIDEO:00: Restoring backlight state
[ 3.341120] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.341618] [drm:asle_set_backlight], bclp = 0x800000ff
[ 3.341623] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.341626] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 3.341630] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 3.341636] [drm:intel_opregion_asle_intr], non asle set request??
[ 3.357984] PM: Starting manual resume from disk
[ 3.359142] PM: Hibernation image partition 8:1 present
[ 3.359145] PM: Looking for hibernation image.
[ 3.372304] PM: Image not found (code -22)
[ 3.372307] PM: Hibernation image not present or could not be loaded.
[ 3.444586] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.467119] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 3.780037] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 3.928101] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 3.929329] Pid: 0, comm: swapper/1 Not tainted 3.7.0-rc4-00382-g28c70f1 #214
[ 3.930481] Call Trace:
[ 3.931613] <IRQ> [<ffffffff810d7358>] __report_bad_irq+0x38/0xf0
[ 3.932097] [<ffffffff810dc105>] ? rcu_report_qs_rnp+0x75/0x120
[ 3.932097] [<ffffffff810d7603>] note_interrupt+0x1f3/0x240
[ 3.932097] [<ffffffff810d4b97>] handle_irq_event_percpu+0x147/0x230
[ 3.932097] [<ffffffff810d4cc9>] handle_irq_event+0x49/0x70
[ 3.932097] [<ffffffff810d7df1>] handle_fasteoi_irq+0x61/0x100
[ 3.932097] [<ffffffff81004709>] handle_irq+0x59/0x150
[ 3.932097] [<ffffffff8104d34e>] ? _local_bh_enable+0xe/0x10
[ 3.932097] [<ffffffff8104df11>] ? irq_enter+0x71/0x80
[ 3.932097] [<ffffffff81003dcb>] do_IRQ+0x5b/0xe0
[ 3.932097] [<ffffffff8151e72d>] common_interrupt+0x6d/0x6d
[ 3.932097] <EOI> [<ffffffff8109d20c>] ? tick_nohz_idle_enter+0x3c/0x70
[ 3.932097] [<ffffffff8109d208>] ? tick_nohz_idle_enter+0x38/0x70
[ 3.932097] [<ffffffff8100af55>] cpu_idle+0x35/0xf0
[ 3.932097] [<ffffffff81513991>] start_secondary+0x80/0x8f
[ 3.932097] handlers:
[ 3.932097] [<ffffffffa004b9c0>] usb_hcd_irq [usbcore]
[ 3.932097] Disabling IRQ #16
[ 3.977415] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
[ 3.978626] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.979817] usb 4-1: Product: Fingerprint Sensor
[ 4.055107] systemd-readahead-replay[383]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 4.168964] udevd[410]: starting version 173
[ 4.220043] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[ 4.328462] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 4.329499] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 4.330592] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.330769] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.331886] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.397409] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 4.397411] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.397413] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 4.397415] usb 4-2: Manufacturer: Lenovo Computer Corp
[ 4.401106] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 4.438478] wmi: Mapper loaded
[ 4.544347] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 4.544354] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 4.544357] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 4.544360] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 4.544363] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 4.544365] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 4.570318] mtp-probe[570]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
[ 4.579199] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 4.580302] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 4.591056] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.593253] ACPI: AC Adapter [AC] (on-line)
[ 4.598513] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65
[ 4.599707] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.600969] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 4.602880] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.613898] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.615187] ACPI: Battery Slot [BAT0] (battery present)
[ 4.630569] cfg80211: Calling CRDA to update world regulatory domain
[ 4.645077] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 4.646412] Copyright(c) 2003-2012 Intel Corporation
[ 4.647885] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 4.649310] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900049a8000
[ 4.650655] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[ 4.652109] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
[ 4.658574] mtp-probe[570]: bus: 4, device: 2 was not an MTP device
[ 4.660071] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 4.661083] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 4.662825] ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.662828] ALSA sound/pci/hda/hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.662831] ALSA sound/pci/hda/hda_auto_parser.c:326 hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.662833] ALSA sound/pci/hda/hda_auto_parser.c:327 mono: mono_out=0x0
[ 4.662835] ALSA sound/pci/hda/hda_auto_parser.c:330 dig-out=0x1c/0x0
[ 4.662837] ALSA sound/pci/hda/hda_auto_parser.c:331 inputs:
[ 4.662840] ALSA sound/pci/hda/hda_auto_parser.c:335 Dock Mic=0x17
[ 4.662842] ALSA sound/pci/hda/hda_auto_parser.c:335 Mic=0x18
[ 4.662844] ALSA sound/pci/hda/hda_auto_parser.c:335 Internal Mic=0x1d
[ 4.664239] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 4.669808] ALSA sound/pci/hda/patch_conexant.c:4546 hda_codec: Enable sync_write for stable communication
[ 4.673734] WARNING! power/level is deprecated; use power/control instead
[ 4.678574] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.725748] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.727355] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.729552] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.732208] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120913/utaddress-251)
[ 4.735211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.736857] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251)
[ 4.739927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.740049] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 4.742945] udevd[416]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory
[ 4.746387] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251)
[ 4.749807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.751557] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.754469] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.792895] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 4.792896] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 4.793017] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.793019] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.793020] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.793022] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 4.793023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 4.793025] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 4.793102] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 4.812613] iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 4.812614] iwlwifi 0000:03:00.0: Device SKU: 0xF0
[ 4.812616] iwlwifi 0000:03:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3
[ 4.816818] Registered led device: phy0-led
[ 4.817144] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.847647] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 4.853545] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.855196] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.856901] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03
[ 4.858575] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2
[ 4.860421] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.919291] ifup-sysctl[646]: ifup-sysctl lo -o hotplug
[ 4.927392] ifup-sysctl[649]: Applying lo ifsysctl settings
[ 4.932328] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.934364] thinkpad_acpi: radio switch found; radios are enabled
[ 4.936044] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.937706] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.943585] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 4.945306] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 4.957348] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 4.960716] Registered led device: tpacpi::thinklight
[ 4.960811] Registered led device: tpacpi::power
[ 4.960865] Registered led device: tpacpi::standby
[ 4.960909] Registered led device: tpacpi::thinkvantage
[ 4.967484] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.973234] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.986190] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12
[ 5.051846] Bluetooth: Core ver 2.16
[ 5.053846] NET: Registered protocol family 31
[ 5.055568] Bluetooth: HCI device and connection manager initialized
[ 5.057268] Bluetooth: HCI socket layer initialized
[ 5.058900] Bluetooth: L2CAP socket layer initialized
[ 5.060484] Bluetooth: SCO socket layer initialized
[ 5.075244] iTCO_vendor_support: vendor-support=0
[ 5.085349] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.086936] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 5.089799] udev-configure-printer[703]: add /module/lpc_ich
[ 5.094281] udev-configure-printer[703]: Failed to get parent
[ 5.102854] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.108888] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 5.113091] usbcore: registered new interface driver btusb
[ 5.138092] udev-configure-printer[719]: add /bus/pci/drivers/lpc_ich
[ 5.142301] udev-configure-printer[719]: Failed to get parent
[ 5.144901] cfg80211: World regulatory domain updated:
[ 5.146237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.147567] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.149005] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.150353] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.151653] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.152952] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.172552] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.216702] ifup-sysctl[745]: ifup-sysctl eth0 -o hotplug
[ 5.224739] ifup-sysctl[759]: Applying eth0 ifsysctl settings
[ 5.227188] ifup-sysctl[761]: ifup-sysctl wlan0 -o hotplug
[ 5.231256] ifup-sysctl[766]: Applying wlan0 ifsysctl settings
[ 5.248722] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k SS
[ 5.261204] ifup[780]: eth0 -o hotplug
[ 5.262595] ifup[782]: wlan0 -o hotplug
[ 5.276928] ifup[795]: Service network not started and mode 'auto' -> skipping
[ 5.280494] ifup[799]: Service network not started and mode 'auto' -> skipping
[ 5.315139] device-mapper: uevent: version 1.0.3
[ 5.316698] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 5.544004] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 5.555840] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 5.629411] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.646199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.667660] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.701590] tun: Universal TUN/TAP device driver, 1.6
[ 5.702768] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.458827] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.460173] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.668245] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.669549] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.806465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.158015] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 7.260166] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 7.260434] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.581044] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.584078] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.503215] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.505546] Bluetooth: BNEP filters: protocol multicast
[ 10.506713] Bluetooth: BNEP socket layer initialized
[ 10.618801] Bluetooth: RFCOMM TTY layer initialized
[ 10.620094] Bluetooth: RFCOMM socket layer initialized
[ 10.621399] Bluetooth: RFCOMM ver 1.11
[ 10.684939] nscd[2037]: segfault at 1 ip 0000000000000001 sp 00007ffff736b7b8 error 14 in libnss_files-2.16.90.so[7f7641154000+c000]
[ 11.107126] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 11.107134] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.107137] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.107140] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 11.107143] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.107145] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.116288] [drm:i915_driver_open],
[ 11.116339] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 11.116347] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.116350] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.116354] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 11.116358] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.116360] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.116428] [drm:i915_driver_open],
[ 11.116750] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
[ 11.116757] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7]
[ 11.116842] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 11.116847] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 11.116863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 11.116866] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 11.116872] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 11.117694] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 11.117699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 11.124025] [drm:intel_crt_detect], CRT detected via hotplug
[ 11.124179] [drm:gmbus_irq_handler], GMBUS interrupt
[ 11.124230] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 11.124236] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.124238] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.124240] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 11.124497] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.124499] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 11.176026] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 11.176034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.176037] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.176039] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 11.208127] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.208133] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 11.208158] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[ 11.208161] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 11.208165] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 11.208169] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 11.208173] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 11.208176] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 11.208297] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 11.208355] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 11.208360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 11.208364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 11.208367] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 11.208370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 11.208373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 11.208396] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
[ 11.208400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 11.208404] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 11.208409] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
[ 11.208412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 11.208414] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 11.208444] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.208448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
[ 11.208451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
[ 11.208454] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.208456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
[ 11.208459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
[ 11.208480] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 11.208484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2]
[ 11.208487] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected
[ 11.208492] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 11.208494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2]
[ 11.208497] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208499] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected
[ 11.208521] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.208524] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3]
[ 11.208527] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected
[ 11.208532] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.208535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3]
[ 11.208537] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.208539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected
[ 11.208585] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 11.208589] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 11.208604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 11.208606] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 11.208611] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 11.210101] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 11.210106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 11.224037] [drm:intel_crt_detect], CRT detected via hotplug
[ 11.224183] [drm:gmbus_irq_handler], GMBUS interrupt
[ 11.224204] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 11.224208] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.224210] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.224213] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 11.224470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 11.224473] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 11.276071] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[ 11.276079] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.276082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 11.276084] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 11.308152] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 11.308156] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
[ 11.308182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes :
[ 11.308185] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 11.308190] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 11.308194] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 11.308197] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 11.308201] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 11.308792] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 11.308982] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 11.308987] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 11.308991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 11.308994] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 11.308997] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 11.308999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 11.309019] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
[ 11.309023] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 11.309027] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309029] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 11.309033] [drm:drm_mode_getconnector], [CONNECTOR:19:?]
[ 11.309035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 11.309037] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 11.309059] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.309062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
[ 11.309065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
[ 11.309068] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 11.309071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2]
[ 11.309073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected
[ 11.309092] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 11.309096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2]
[ 11.309099] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected
[ 11.309105] [drm:drm_mode_getconnector], [CONNECTOR:23:?]
[ 11.309107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2]
[ 11.309110] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected
[ 11.309130] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.309134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3]
[ 11.309136] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected
[ 11.309142] [drm:drm_mode_getconnector], [CONNECTOR:25:?]
[ 11.309144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3]
[ 11.309147] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 11.309149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected
[ 11.332467] [drm:drm_mode_addfb], [FB:33]
[ 11.332540] [drm:drm_mode_setcrtc], [CRTC:3]
[ 11.332547] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 11.332550] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0)
[ 11.332558] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.332561] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.359633] [drm:i9xx_update_plane], Writing base 00538000 00000000 0 0 15360
[ 11.368965] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 11.369043] [drm:drm_mode_setcrtc], [CRTC:4]
[ 11.369052] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
[ 11.369055] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0)
[ 11.369062] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.369065] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.369072] [drm:i9xx_update_plane], Writing base 00538000 00000000 0 0 15360
[ 11.376030] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 11.377406] [drm:intel_opregion_asle_intr], non asle set request??
[ 11.377801] [drm:asle_set_backlight], bclp = 0x800000ff
[ 11.377806] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 11.377809] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 11.377812] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 11.377818] [drm:intel_opregion_asle_intr], non asle set request??
[ 11.379977] [drm:intel_opregion_asle_intr], non asle set request??
[ 11.380417] [drm:asle_set_backlight], bclp = 0x800000ff
[ 11.380421] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 11.380424] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215
[ 11.380427] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215
[ 11.380431] [drm:intel_opregion_asle_intr], non asle set request??
[ 11.394264] [drm:drm_mode_addfb], [FB:34]
[ 11.394306] [drm:drm_mode_setcrtc], [CRTC:3]
[ 11.394314] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 11.394317] [drm:intel_crtc_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0)
[ 11.394325] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.394328] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.401698] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144
[ 11.412128] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 11.412190] [drm:drm_mode_setcrtc], [CRTC:4]
[ 11.412199] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1]
[ 11.412202] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[ 11.412211] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 11.412213] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 11.412219] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144
[ 11.428032] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 11.692905] cgroup: libvirtd (2194) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 11.692992] cgroup: libvirtd (2194) created nested cgroup for controller "freezer" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 11.693071] cgroup: libvirtd (2194) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 12.603288] NET: Registered protocol family 17
[ 19.247046] [drm:intel_crtc_cursor_set], cursor off
[ 19.247063] [drm:intel_crtc_cursor_set], cursor off
[ 19.256456] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 19.256472] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.256476] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 19.256492] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760
[ 19.280080] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 19.280093] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 19.280104] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.280108] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 19.280117] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760
[ 19.288042] [drm:intel_update_fbc], more than one pipe active, disabling compression
[ 19.288047] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 19.288051] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.288053] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 19.288056] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 19.288058] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.288060] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 19.288073] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0)
[ 19.288075] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.288077] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
[ 19.288079] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
[ 19.288082] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 19.288084] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4]
\
 
 \ /
  Last update: 2013-03-15 15:42    [W:0.193 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site