lkml.org 
[lkml]   [2013]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] ARM: davinci: da850: Enable EHRPWM TBCLK from CFG_CHIP1
On 3/15/2013 10:27 AM, Philip, Avinash wrote:
> On Thu, Mar 14, 2013 at 18:31:52, Nori, Sekhar wrote:
>> On 3/14/2013 4:07 PM, Philip Avinash wrote:
>>> da850 platforms require TBCLK synchronization in CFG_CHIP1 register for
>>> TBCLK enable in EHRPWM modules. Enabling of TBCLK is done only if EHRPWM
>>> DT node status is set to "okay" DT blob.
>>> Also adds macro definitions for DA8XX_EHRPWM_TBCLKSYNC and
>>> DA8XX_CFGCHIP1_REG.
>>
>> So there is actually a TBCLK in DA850 - it's just not modeled as a clock
>> similar to the way it is done on AM335x? If yes, then instead of adding
>> a dummy clock node and doing the TBCLK enable as part of init, why not
>> model TBCLK in clock tree even on DA850?
>
>
> TBCLK enabling should done from platform specific way. In DA850 it is done at
> CFGCHIP1 register. Unfortunately Davinci clock frame work will support only
> clock nodes inside PLLC and PSC modules. Handling of CFGCHP1 require

That's true at the moment, but that can be fixed.

> modifications in clock frame work.
>
> Hence handling it as part of initialization.

I am curious as to how this clock is handled in am335x. I searched for
tbclk in arch/arm/ of linux-next but could not find any references.
Where should I be looking?

Thanks,
Sekhar


\
 
 \ /
  Last update: 2013-03-15 06:44    [W:0.063 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site