lkml.org 
[lkml]   [2013]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] wait while adding MMC host to ensure root mounts
From
2013/3/14, Sergey Yanovich <ynvich@gmail.com>:
> MMC hosts are added asynchronously. We need to wait until detect returns to
> avoid failed root filesystem mounts.
> ---8<---
> VFS: Cannot open root device "mmcblk0p1" or unknown-block(0,0): error -6
> Please append a correct "root=" boot option; here are the available
> partitions:
> mmc0: host does not support reading read-only switch. assuming
> write-enable.
> 1f00 256 mtdblock0 (driver?)
> 1f01 256 mtdblock1 (driver?)
> 1f02 2560 mtdblock2 mmc0: new SDHC card at address b368
> (driver?)
> 1f03 29696 mtdblock3 (driver?)
> 1f04 16384 mtdblock4 mmcblk0: mmc0:b368 USD 3.72 GiB
> (driver?)
> mmcblk0: p1
> b300 3910656 mmcblk0 driver: mmcblk
> b301 3906560 mmcblk0p1 00000000-01
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(0,0)
> ---8<---
>
> Signed-off-by: Sergey Yanovich <ynvich@gmail.com>
> ---
Hi.
Have you ever tried to use rootwait or rootdelay on command line ?
If no, You can use them.

Thanks.


\
 
 \ /
  Last update: 2013-03-14 06:01    [W:0.113 / U:2.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site